I think there is no problem using Chassis without NMC at least analog/digital quad cards, Am I right? ----- Original Message ----- From: Ross Cornett To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Sent: Thursday, July 07, 2005 9:54 AM Subject: Re: [USR-TC] NMC I have never tried to put that NMC in a nother slot, but in your case it is worth the try. I would also try another back side card. After this the chassis must be replaced. They are cheap. ----- Original Message ----- From: Shahrooz Sharghi To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Sent: Thursday, July 07, 2005 11:44 AM Subject: Re: [USR-TC] NMC in another chassis it works normal! what do I have to do with my chassis then? ----- Original Message ----- From: Ross Cornett To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Sent: Thursday, July 07, 2005 9:31 AM Subject: Re: [USR-TC] NMC email me off line. I will assist you if I can. Sounds like it could be a lights out for the card. Do you have others to see what they will do? Other chassis's available to see if the chassis port is bad where the NMC card plugs in? Ross ----- Original Message ----- From: Shahrooz Sharghi To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Sent: Thursday, July 07, 2005 11:21 AM Subject: Re: [USR-TC] NMC yes, I have read and write access to it, the keys are factory default "public" & "private" also my station running TCM works with other NMC and TCMs. Thanks a lot ----- Original Message ----- From: Ross Cornett To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Sent: Thursday, July 07, 2005 9:03 AM Subject: Re: [USR-TC] NMC are you sure you have read and write capability to the chassis? SNMP could be the issue here. Just checking. ----- Original Message ----- From: Shahrooz Sharghi To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Sent: Thursday, July 07, 2005 10:27 AM Subject: [USR-TC] NMC I have to add that my NMC even doesn't detect netserver card (it detects nothing!). Is it a bad card? how can I repair it? Thanks Shahrooz -------------------------------------------------------------------- _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc ---------------------------------------------------------------------- _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc ------------------------------------------------------------------------ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc -------------------------------------------------------------------------- _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc ---------------------------------------------------------------------------- _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc ------------------------------------------------------------------------------ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc