http://www.freeradius.org/ You'll want to look at setting up radius which will give you both authorization and accounting. I'm sure there are many variants out there...some free, some not. Never used the above one but looked decent. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Dev Sent: Wednesday, October 27, 2004 4:11 PM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] Call Logs Are there any howto's for setting up a linux accounting server? At 04:08 PM 10/27/2004, you wrote: In my opinion....via a accounting server. show accounting Todd ----- Original Message ----- From: Dev <mailto:dev@umpa-us.com> To: usr-tc@mailman.xmission.com Sent: Wednesday, October 27, 2004 3:49 PM Subject: [USR-TC] Call Logs Hello all, What is the best way to get a log of calls. I am using the the TCM but would like to get a report... I can access the ARC but have a hard time connecting to the DSP card. I am looking for the date/time of connect and duration as well as any other good data like modem speed and protocol. _____ Brian C. Doyle Director, Internet Services United Merchant Processing Association http://www.umpa-us.com 1-800-555-9665 ext 212 _____ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _____ UMPA <http://www.umpa-us.com/umpalogo2004sm.jpg> Brian C. Doyle Director, Internet Services United Merchant Processing Association http://www.umpa-us.com 1-800-555-9665 ext 212