Hello guys, I'm again in trouble. You've been very helpful last time. I need the init string for "USR Quad V.34 ANLG/DIG Modem". I have configured the device but the modem does not response when i dial from remote pc. Even the lights do not blink. Tried in different ports. Is it because of the init string is incorrect. I tried 3 or 4 strings that i found from different sources. The show s1 displays: ----------------------- Current Status - Port S1 --------------------------- Status: IDLE Input: 0 Parity Errors: 0 Output: 15 Framing Errors: 0 Pending: 0 Overrun Errors: 0 Active Configuration Default Configuration -------------------- --------------------- Port Type: Netwrk Netwrk (Dial In) (Security) Login Service: PortMux PortMux Device Service: Telnet@6001 Telnet@6001 Modem Stat: READY ACTIVE Databits: 8 8 Stopbits: 1 1 Parity: none none Flow Control: None None* Modem Control: on on HDLC Framing: PPP in modem PPP in modem SLIP Framing: SLIP in NETServer SLIP in NETServer Remote Host: 0.0.0.0 0.0.0.0 Interface: Unassigned (SLIP,Listen (SLIP,Quiet) Mtu: 0 0 -- Press Return for More -- Modem Presence: Modem is present Init Script: dhaka Init When?: Every RESET Login Prompt: $hostname login: Login Message: Welcome to Global Information Network (BD) Dial Group: 0 TAP type: OFF OFF Init script dhaka=AT&F1&C1&D2S0=1\r Hope somebody can help. tahnaks alex <alex@wanex.ge> wrote:Where can I download new TCS software for my chassis? We are having problems with our current (old) software and want to try a new one. Contact me by mail : alex@wanex.ge _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc --------------------------------- Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, and more