Hello guys,
I'm again in trouble. You've been very helpful last time.
I need the init string for "USR Quad V.34 ANLG/DIG Modem". I have configured the device but the modem does not response when i dial from remote pc. Even the lights do not blink. Tried in different ports. Is it because of the init string is incorrect. I tried 3 or 4 strings that i found from different sources.
The show s1 displays:
----------------------- Current Status - Port S1 ---------------------------
Status: IDLE
Input: 0 Parity Errors: 0
Output: 15 Framing Errors: 0
Pending: 0 Overrun Errors: 0
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Dial In) (Security)
Login Service: PortMux PortMux
Device Service: Telnet@6001 Telnet@6001
Modem Stat: READY ACTIVE
Databits: 8 8
Stopbits: 1 1
Parity: none none
Flow Control: None None*
Modem Control: on on
HDLC Framing: PPP in modem PPP in modem
SLIP Framing: SLIP in NETServer SLIP in NETServer
Remote Host: 0.0.0.0 0.0.0.0
Interface: Unassigned (SLIP,Listen (SLIP,Quiet)
Mtu: 0 0
-- Press Return for More --
Modem Presence: Modem is present
Init Script: dhaka
Init When?: Every RESET
Login Prompt: $hostname login:
Login Message: Welcome to Global Information Network (BD)
Dial Group: 0
TAP type: OFF OFF
Init script dhaka=AT&F1&C1&D2S0=1\r
Hope somebody can help.
tahnaks
alex <alex@wanex.ge> wrote:
Where can I download new TCS software for my chassis?
We are having problems with our current (old) software
and want to try a new one.
Contact me by mail : alex@wanex.ge
_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc