Re: [USR-TC] Hiper DSP

2 Aug 2005

      MessageThere is only 1 hiper arc.
Thanks

  ----- Original Message ----- 
  From: Todd Bertolozzi 
  To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' 
  Sent: Monday, August 01, 2005 10:38 AM
  Subject: RE: [USR-TC] Hiper DSP

  Copy and paste to the list what you get when you do a 'list chassis' command.

  For nmc settings do a 'show nmc settings'

  This is all done from the hiperarc. If you have more than 1 arc in the chassis you need to set things up on both arcs.

  Todd
    -----Original Message-----
    From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Shahrooz Sharghi
    Sent: Monday, August 01, 2005 11:47 AM
    To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
    Subject: Re: [USR-TC] Hiper DSP

    Where is nmc chassis awareness ?
    In TCM I can see in NMC settings:
    Auto config on Card Initialization = Disable

    We didn't set anything manually on Hiper ARC.
    The DSP have factory default setting.

    Best Regards
    Shahrooz Sharghi

      ----- Original Message ----- 
      From: Todd 
      To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' 
      Sent: Tuesday, July 26, 2005 11:53 AM
      Subject: RE: [USR-TC] Hiper DSP

      Do you have nmc chassis awareness enabled or do you have things setup manually on the arc?  

      List chassis 

      If you don't see the other 2 cards owned by your arc with the correct number of timeslots, etc that may be your problem.

      Todd

      -----Original Message-----
      From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Adam Barnhill
      Sent: Tuesday, July 26, 2005 2:16 PM
      To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
      Subject: RE: [USR-TC] Hiper DSP

      Check your Timeslots for Local/Remote Out of Service messages. It may also be that two timeslots are mapped [Timeslot Mapping and Blocking] to one Modem or something of that nature. 

        -----Original Message-----
        From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi
        Sent: Tuesday, July 26, 2005 12:26 PM
        To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
        Subject: [USR-TC] Hiper DSP

        Hi all

        We have a tc1000 with this configuration:

        1- NMC Card

        2- Hiper Access router card

        3- 1 E1 DSP ISDN Signaling

        Max users could connect to it are 29, never we don't have 30 online user together.

        After 29 online user they get Busy Tone. What do you think about this problem?

        Regards

        Shahrooz Sharghi

--------------------------------------------------------------------------

      _______________________________________________
      USR-TC mailing list
      USR-TC@mailman.xmission.com
      http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

------------------------------------------------------------------------------

  _______________________________________________
  USR-TC mailing list
  USR-TC@mailman.xmission.com
  http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc