Just curious...when you say you've disabled radius, authentication....what did you do? When you do a show authentication settings command.....are both local and remote auth disabled? Todd ----- Original Message ----- From: Jamie Orzechowski To: usr-tc@mailman.xmission.com Sent: Sunday, November 28, 2004 10:21 AM Subject: [USR-TC] HipER ARC L2TP Issues Hello .. I am trying get setup LT2P on the ARC so ALL calls are tunneled to our Nortel Shasta. I have done "set tunnel user default type l2tp" and this works. The issue is that it will first authenticate the user in radius, then it will forward the sessio nto the LAC which then authenticates the user again. I do not want to the ARC to authenticate the user. It should simply connect the tunnel and then the LAC should authenticate. I have tried disabling radius, authentication but it will not accept the call when this is done. any ideas? ------------------------------------- Jamie Orzechowski - CCNA RipNET Ltd. System/Network Administrator Tel.: 613-342-3946 x294 Cell.: 613-802-1667 THIS MESSAGE IS INTENDED ONLY FOR THE ADDRESSEE, IT MAY CONTAIN PRIVILEGED OR CONFIDENTIAL INFORMATION. ANY UNAUTHORIZED DISCLOSURE IS STRICTLY PROHIBITED. IF YOU HAVE RECEIVED THIS MESSAGE IN ERROR, PLEASE NOTIFY ME IMMEDIATELY SO THAT I MAY CORRECT MY INTERNAL RECORDS. PLEASE THEN DELETE THE ORIGINAL MESSAGE. ------------------------------------- ------------------------------------------------------------------------------ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc