- USR-TC - mailman.xmission.com

Re: (usr-tc) ISDN Problem with Netgear RH348
by John Schmerold 24 Sep '99

24 Sep '99

I don't remember why, but PAP is all we use with the Netserver+ 8I Steve Coleman wrote: > It turned out to be a CHAP problem. It would authenticate and work for > about 3 minutes, then the CHAP timed out and disconnected. I switched to > PAP and it's been fine. > > Thanks. > > ----- Original Message ----- > From: Ken Kirchner <kenk(a)shreve.net> > To: <usr-tc(a)lists.xmission.com> > Sent: Thursday, September 23, 1999 5:02 PM > Subject: Re: (usr-tc) ISDN Problem with Netgear RH348 > > > On Wed, 22 Sep 1999, Steve Coleman wrote: > > > > > Can't seem to get this unit working in any configuration. We have are > using > > > the HiperArc and HiperDSP with the latest code on both. The connection > will > > > establish and work for a few minutes, but it keeps resetting, usually > after > > > 3-5 minutes. This happens if the Netgear calls in using NAT, calls in > using > > > a routed subnet, or if the HiperARC calls the Netgear. Idle timers on > both > > > ends have been set to 0. Any ideas? > > > > Latest code as in 4.2.32-1 on the ARC? Hmm. I know we are running > > 2.0.81/4.1.59 and my Netgear RT-328 at the house hasnt had any problems. > > I use NAT also. Your Netgear is using v1.50 frimware I hope? > > ___ ___ > > (___) Kenneth Kirchner .o. mailto:kenk@shreve.net (___) > > (__) Asst SysAdmin .o. Voice (318) 222-2638 Ext 108 (__) > > (_) ShreveNet, Inc. .o. Fax (318) 213-6612 (_) > > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. -- John Schmerold Katy Computer, LLC 20 Meramec Station Rd Valley Park, MO 63088 314-316-9000 314-316-9200 fax - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) problems with CHAP authentication
by Ahmed Saeed 24 Sep '99

24 Sep '99

kindly post the ppp negotiation and the show ppp settings. Ahmed On Tue, 21 Sep 1999, Theodore Cekan wrote: > Hi, > > I have a user trying to dial in with a Livingston Office Router U-AP, > running software version 3.7.1 AP.5. For some reason they cannot connect to > my TC Hiper system, ARC verson 4.1.59, unless PAP is selected as the only > allowed authentication scheme. "Any" doesnt work, chap kicks in and they > get denied access. The Livingston box does have chap turned off, btw. We > are stumped. Any help is much appreciated. > > Thanks > > Ted Cekan > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) ISDN on TC
by Mike Wilker 24 Sep '99

24 Sep '99

Is there any way to either do 56K DOV over Channelize T1 on a HiperArc, or is there a BRI product for the TC? Thanks. Mike Wilker Operations Manager Local Link, Inc. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) ISDN Problem with Netgear RH348
by Steve Coleman 24 Sep '99

24 Sep '99

Can't seem to get this unit working in any configuration. We have are using the HiperArc and HiperDSP with the latest code on both. The connection will establish and work for a few minutes, but it keeps resetting, usually after 3-5 minutes. This happens if the Netgear calls in using NAT, calls in using a routed subnet, or if the HiperARC calls the Netgear. Idle timers on both ends have been set to 0. Any ideas? Thanks, Steve Coleman Computer Solutions - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) ActionTec Call waiting modem?
by Stainforth, Matthew 23 Sep '99

23 Sep '99

Has anybody tried this call-waiting modem? Supposedly it'll allow you to answer a call and talk for up to 7 seconds without dropping the connection to the ISP. I'm a little skeptical but I'm willing to entertain the thought. There's a brief promo at http://www.actiontec.com/products/modems/cwi/index.html Matthew - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Upgrading DSPs
by K Mitchell 23 Sep '99

23 Sep '99

Finally got my new DSP problems straightened out for the most part. Original card was bad, swapped with a replacement. Everything appears to be fine except I can't get the type from STATIC to DYNAMIC, seems to be working ok though so I'm not sure what difference it makes. On to my main point, I'm currently running 1.2.60 on all cards and 4.1.59-6 ARC code. On the DSPs, should I go with 1.2.37 or move up to 2.0.81? Any problems with either? Same question on the ARC, is 4.2.31-1 worth bumping up to? Thanks, Kirk -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Problems with macs and HiperARC 4.1.59
by Scott Trautman 23 Sep '99

23 Sep '99

So far so good with the very manly 4.2.32 code. I've got 4 of 'em on this rev of code for a week and no problems. I'm not using the extremely manly OSPF yet (subject of most commentary so far), using the un-manly rip->OSPF gateway of yore yet. SMT -----Original Message----- From: mmm3(a)cornell.edu [mailto:mmm3@cornell.edu] Sent: Thursday, September 23, 1999 1:52 PM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) Problems with macs and HiperARC 4.1.59 >Speaking of 4.2.29, which manly men among us has this up and running? >Hows it look? Hows the OSPF working so far? Manly men??? Hmph. 4.2.29 was removed from the downloads because of major problems with the code. The latest version is 4.2.32-1 which I have downloaded but am not *manly* enough to put on my ARCs yet. Am waiting to hear from others, first. 8-) ********************************************************* Michelle M. Mogil N&CS, Network Operations Center Rhodes Hall, Cornell University, Ithaca, NY 14853 vox: (607) 255-0516, fax: (607) 255-8420 email: mmm3(a)cornell.edu ********************************************** - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Upgrading DSPs
by Stainforth, Matthew 23 Sep '99

23 Sep '99

Rebooting does seem to correct the DSPs for a while but the problem always creeps back. They always go in adjacent pairs because one controller controls two adjacent modems. As fate would have it, the very first two modems in my largest hunt group went freaky the other day. I haven't noticed whether the problem creeps back on the very same two modems every time or if it's random though since I always just busy out the trunks and wait until I have another reason to reboot the card, by which time I've long since forgotten which two modems they were :) On Thursday, September 23, 1999 3:44 PM, K Mitchell [SMTP:mitch@keyconn.net] wrote: > At 03:28 PM 9/23/99 -0300, "Stainforth, Matthew" > <MatthewS(a)staff.brunnet.net> wrote: > > > Does rebooting the DSP take care of the modems? I have a pair on one card > that go freaky every few weeks. I just busy out the card to shove all my > traffic off, reboot the card, restore to service, and it's good for another > few weeks. > > > -- > Kirk Mitchell-General Manager mitch(a)keyconn.net > Keystone Connect Unlock Your World > Altoona, PA 814-941-5000 http://www.keyconn.net > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) Server Assigned DNS
by Michael DeMan 23 Sep '99

23 Sep '99

I tried this on a HiperARC card and it still does not seem to work. Is there something else I need to configure, or is it different for HiperARC? - Mike ---------- >From: "Mike McHenry" <mmchen(a)minn.net> >To: <usr-tc(a)lists.xmission.com>, <usr-tc(a)xmission.com> >Subject: RE: (usr-tc) Server Assigned DNS >Date: Tue, Sep 21, 1999, 12:26 PM > >set nameserver 10.0.0.1 >set nameserver 2 10.0.0.2 > >Nothing else should be needed, the Portmasters and Netservers will correctly >send the dns servers as part of a normal PPP negotiation sequence with a >customer dialing in... - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Upgrading DSPs
by Stainforth, Matthew 23 Sep '99

23 Sep '99

Speaking of firmware problems, has anyone heard if 3Com is almost ready to release a version that fixes that stupid "modems go freaky in pairs" problem? I have 6 channels busied out due to this at the moment. I know there was some bleeding edge code that helped but I'm less than enthusiastic about running that on my production boxes. On Thursday, September 23, 1999 3:26 PM, Scott Trautman [SMTP:scottt@corp.gdinet.com] wrote: > I have one stinkin' site where 2.0.81 = no Rockwell modes@V90 (long > screeching, no negotiation), > that site I use 1.2.59, everywhere else quite happy with 2.0.81. > > SMT > > -----Original Message----- > From: Stainforth, Matthew [mailto:MatthewS@staff.brunnet.net] > Sent: Thursday, September 23, 1999 1:20 PM > To: 'usr-tc(a)lists.xmission.com' > Subject: RE: (usr-tc) Upgrading DSPs > > > > I'm running 2.0.81 on most of my DSPs and I have no complaints specific to > that version. I needed it so I could do NFAS which also seems to work > great. > > On Thursday, September 23, 1999 2:28 PM, K Mitchell [SMTP:mitch@keyconn.net] > wrote: > > On to my main point, I'm currently running 1.2.60 on all cards and > > 4.1.59-6 ARC code. On the DSPs, should I go with 1.2.37 or move up to > > 2.0.81? Any problems with either? Same question on the ARC, is 4.2.31-1 > > worth bumping up to? > > > > Thanks, > > Kirk > > > > -- > > Kirk Mitchell-General Manager mitch(a)keyconn.net > > Keystone Connect Unlock Your World > > Altoona, PA 814-941-5000 http://www.keyconn.net > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1