- USR-TC - mailman.xmission.com

RE: (usr-tc) Modems still hang!
by Gorkem Yuksel 20 Jan '00

20 Jan '00

Hi! I 've been running ARC 4.1.59.6 NMC 6.1.17 DSP 2.0.81 since last August and had same problems(pair modems hang) 6 or 7 times. But This year, it happened 4 times for 10 days....I had to do reseat it everytime. I e-mailed and contacted my original supplier and 3 Com but...no answer....except for sales lady's call asking an expensive support contract which I cannot afford. I have only 2 modem cards and my customer calls right away when it start hang by pair. Can anyone send me ARC 4.2.32 code by e-mail? I can receive up tp 4 meg. Please send it to gorkem(a)gncom.com and ken(a)gncom.com... one is in NT and the other is in Win 95 machine. Thanks... Gorkem,,,Ken. gorkem(a)gncom.com Globenet ---------- From: K Mitchell[SMTP:mitch@keyconn.net] Reply To: usr-tc(a)lists.xmission.com Sent: Friday, November 26, 1999 12:03 PM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) Modems still hang! At 10:45 AM 11/26/99 -0500, Paul Farber wrote: >Connections = 265 Fails = 358 >Connections = 216 Fails = 407 > >Seems like the hung modem pair problem is still amung us. > >ARC : 4-1-59-6 >NMC : 5.6.2 >DSP : 2.0.81 I've been running; ARC 4.2.32 NMC 6.1.17 DSP 2.0.81 and I haven't seen a hung modem pair in over a month. This used to occur about weekly here. -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) Other server options?
by Mark Thornton 20 Jan '00

20 Jan '00

Is anyone using another access server such as Ascend/Lucent to gain a wider range of modem compatibility, or is that just marketing hype? I can't tell if the local providers with the other equipment are having the same connection problems the 3Com's typically experience, or if they are different types of client modems. Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Strange syslog entries
by Kelly Peterson 20 Jan '00

20 Jan '00

We're seeing exactly the same thing and would be interested in knowing how to stop this. -----Original Message----- From: Randy McMillan [mailto:randy@pacinfo.com] Sent: Thursday, January 20, 2000 11:42 AM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) Strange syslog entries Thanks. If packet logging was set to none and size 0, why would it be logging anything at all? (I am curious and not asking that so I can make it ignore this) Randy McMillan PacInfo ...... - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Strange syslog entries
by Randy McMillan 20 Jan '00

20 Jan '00

Is there anyone who can tell me what these entries in my syslog mean and/or how to prevent the hyper arc from sending them. Am running 4.1.59-6. Usually there aren't all that many, but today it seemed to be going wild and started affecting the mail server. I don't think I have any "Taps" going. Jan 19 11:56:14 tc2 --syslog capture: a71a010a slot:11/mod:2 --syslog capture:stop Jan 19 11:56:22 tc2 last message repeated 345 times Jan 19 11:56:22 tc2 --syslog capture: ed1d0103 slot:4/mod:2 --syslog capture:stop Jan 19 11:56:22 tc2 --syslog capture: a71a010a slot:11/mod:2 --syslog capture:stop Jan 19 11:56:53 tc2 last message repeated 1282 times Jan 19 11:57:53 tc2 last message repeated 2676 times Jan 19 11:58:40 tc2 last message repeated 1539 times Jan 19 11:59:43 tc2 --syslog capture: a71a010a slot:11/mod:2 --syslog capture:stop Jan 19 12:00:45 tc2 --syslog capture: a71a010a slot:11/mod:2 --syslog capture:stop Thanks for any information. Randy McMillan PacInfo - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) 1200 baud modems
by eric＠dol.net 20 Jan '00

20 Jan '00

I have a bunch of quad modems that came in a chasis that I bought that I can only get 1200 baud connections on. I have reflashed the modems. Since all 4 modems on the card have the same results is the card bad? thanks eric - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Backing up NMC and ARC configs
by Ian Quinn 19 Jan '00

19 Jan '00

You could try HiPer ARC Manager (HARM) or the bulk configuration file facility. Some commands for the bulk config file approach: save configuration saves the configuration to a file (eg ConfigBulkFile) set bulk_file changes the bulk config file name reset configuration restores the config from the bulk file (eg after uploading) I recall that you need to do a reboot after restoring the config as reset config only loads it onto flash, and doesn't replace the working config (at least on 4.1.x). Doing a save all will overwrite the flash config with the config in memory (eg if you want to undo a reset, do a save all). TFTP can be used to shift the file on and off the HARC flash. It's a binary file, so use the binary mode. It would be best to try it all out before you need it :-) Regards Ian Quinn InterConnect Ltd Phone: (64 4) 494 1144 Fax: (64 4) 494 1140 Mobile: (64 25) 2477 608 Street: Level 2, 5-7 Willeston Street, Wellington Postal: PO Box 5527, Lambton Quay, Wellington E.Mail: ianq(a)interconnect.co.nz http://www.interconnect.co.nz > -----Original Message----- > From: Charles Sprickman [SMTP:spork@inch.com] > Sent: Thursday, January 20, 2000 12:00 PM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) Backing up NMC and ARC configs > > On Thu, 20 Jan 2000, Campbell Simpson wrote: > > > Hi all > > > > Just following on from the ARC tftp upload thread, does anyone have an > cunning way to backup and restore the full config of an NMC or ARC card. > > Not to be an ass, but since I never found a way, I initially ran a script > of my first config and saved it out as a file. Whenever I make any > changes, I also make it to this file. So far, it's made configuring new > ARCs extremely easy... > > Now of course a single config file like a Cisco has would be wonderful, as > it makes it super easy to back things up. Long ago I tftp'd down all the > files I could grab off the thing and really couldn't find a single file > with all settings... > > Charles > > > Its a real pain if you have to swap out cards and re-configure the cards > manually. > > > > Cheers > > > > Campbell > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Mac Modems
by James Cook 19 Jan '00

19 Jan '00

Has anyone had problems with the PowerBook G3 Apple Internal modems connecting to Total Control HiperDSPs? These modems are Rockwell based and seem to go into the "spiral of death" when connecting using V.90. They appear to connect fine using V.34. We are running 2.0.60 for the DSPs, 4.1.59 on the HiperArcs, & 5.5.5 on the NMCs. TIA, ======================= James M. Cook Net Resource 603.629.9008x302 Fax: 603.629.9749 james(a)net-resource.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) ARC & NMC IP Addresses
by Jeremy Gault 19 Jan '00

19 Jan '00

Hi, We are needing to change the IP addresses of our HiPer ARC and NMC cards. Does anyone know/have the command used to change these? (I'm sure it's something simple.) Any help would be appreciate.d Thanks. Jeremy Jeremy Gault Systems Administrator - WingNET Internet Services http://www.wingnet.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) ARC tftp upload
by Charles Sprickman 19 Jan '00

19 Jan '00

Hi, Is there any way (not involving snmp) to upload new code to the arc? Or to download from the arc cli? On site, and would like to give this a whirl as my laptop (w/TCM) is being unpredictable... Thanks, Charles -- =-----------------= = | Charles Sprickman Internet Channel | | INCH System Administration Team (212)243-5200 | | spork(a)inch.com access(a)inch.com | = =----------------= - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) Serial Connection and HiperArc 4.1.22
by Richard Bosire 19 Jan '00

19 Jan '00

Hi's I upgraded one my Netservers to HiperArc 4.1.22 and I can no longer configure services per modem basis. I used to offer rlogin services on a group of modems [ for uucp, rather archaic but still in use] on the former and now that cant work on the latter. All there is on the HiperArc is global config for either Radius or Tacas Auth. Anyone knows how i can configure per modem basis differnt services, eg configure a group of modem to handle my uucp clients who are authenticated on a different host from the Radius Server.. TIA bosire richard bosire AfricaOnline (k) Ltd. p.o box 63017 Nairobi, Kenya tel 254.2.243775, fax 254.2.243762 http://www.africaonline.co.ke - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2