- USR-TC - mailman.xmission.com

(usr-tc) HiperARC filter question......
by Brian 07 Feb '00

07 Feb '00

I am making filters for all of our users on the HiperARC, basically a "default" filter, which I wish to assign in RADIUS. I am doing this like: Filter-Id = "filter.in" Now, we also have an Ascend TNT box, which also uses the same RADIUS. I wish it were as simple as making a filter on the Ascend called "filter" and going with that but it gets a little crazy......... Ascend limits you to like a dozen or so rules on a filter, no more. So we have to break it into 2 filters, and assign like so: Filter-Id = "filter.in1", Filter-Id = "filter.in2" Yes this works.........on the Ascend, but I don't believe this will work on the HiperARC. and I am not sure if the HiperARC would be ok in putting all the rules in one of the files and leaving the other non-existant, it would probably deny access............. Does anyone have a solution? Brian ----------------------------------------------------- Brian Feeny (BF304) signal(a)shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Various Vendors
by Netadmin 07 Feb '00

07 Feb '00

A wide variety of topics have been brought up lately. What are the lists users thoughts of other remote access products compared to 3com- Total Control? It seems the 3com is widely used products among the ISP forum. Any comments are appreciated.

10 15

Re: (usr-tc) QUICK COnnections
by Clayton Zekelman 07 Feb '00

07 Feb '00

We just flashed our DSP's over to 2.0.51 on the weekend, and have had a few reports of users with 3Com modems only conecting at 19,200. Not sure if this is just a fluke or a real problem that we're just starting to see. Anyone else see this with 2.0.51? At 07:37 PM 2/6/00 -0500, you wrote: > > I have noticed that our DSPs log callers in much quicker than our >quad modems do.... HOWEVER, after flashing a DSP to the new 2.0.51 code, >I have noticed that it is slower to login the user??? Any ideas here? I >thought there was a setting that could be used to speed that up, but not >sure... I did not change anything on the DSP I upgraded to 2.0.51, at >least not that I know of! > > Any ideas? > >=========================================================================== === >Phillip Ferraro WorldNet Access, Inc >pferraro(a)wna-linknet.com Onslow County's PREMIER InterNet Service >Voice (910) 346-0835 824 Gumbranch Square, Suite R3 >FAX (910) 455-1933 Jacksonville, Nc 28540-6269 >=========================================================================== === > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > --- Clayton Zekelman Managed Network Systems Inc. (MNSi) 875 Ouellette Avenue Windsor, Ontario N9A 4J6 tel. 519-985-8410 fax. 519-258-3009 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Getting disconnect reasons from Hiper DSPs
by Brian Buffington 06 Feb '00

06 Feb '00

I've been trying for the past several hours to get the modem disconnect reasons logged from the Hiper DSPs. I've configured the trap destination through TCM, enabled logging groups 2345 on the NMC and set the logging server to a radius server (Cistron/FreeRadius 1.6.0 on Linux) running on port 1813 on a spare machine. Then I configured the DSPs to log groups 1-4 and enabled the traps for incoming termination. Then I save the template to NVRAM and refresh it. Everything works great up to that point, I can see the modem disconnection reasons in the radius detail log. The problem is that as soon as I refresh the template, no incoming calls can be established on the DSP. "monitor ppp" shows absolutely nothing and a packet dump shows that no radius packets are being exchanged with the authentication server. So I get to watch as clients already on the server disconnect, but no new connections will be successful. As soon as I "restore modem from default" in TCM, calls can be authenticated again but the disconnection reasons logging ceases to work. It seems I can get the reasons logged or get people authenticated, but not both simultaneously. I've probably overlooked something in the configuration that is causing this problem, but I can't find anything in the documentation library (including the documentation CD) or in the KB. Has anyone else gotten modem disconnection reasons logged? Here's the relevant info on this particular chassis: The DSPs are hardware version 0.53.0 running DSP code 2.0.51 The ARC is hardware version 19.0.0 running 4.2.32 The NMC is hardware version 2.0 running 6.2.17 Let me know if you need more information. Thanks in advance, -- Brian Buffington BridgerNET Systems Administrator draconis(a)bridgernet.com (435)753-2030 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) dns server assignment in PPP
by Mark Thornton 05 Feb '00

05 Feb '00

I am having trouble with one of my TCH's assigning the dns servers as part of the PPP negotiation. The other chassis's all do it fine, but I can't tell what the difference in the configuration is. SHOW PPP lists the correct dns servers on all the chassis. Any ideas as to what I should look for? Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

(usr-tc) One Quick Question
by John Lange 04 Feb '00

04 Feb '00

I don't have a TC yet and have been considering buying 3 of them (Vendors forget it). I have found that it seems to be the general consensus that the 3Com/USR Tech Support is the pits, Service Contracts are a rip-off, the whole world is unfair, and the grass is greener on the other side, I just cannot decide wether to climb the fence or go around... Here's the "I Want To Be a Millionaire Question" Please only send your "FINAL ANSWER" off the list! Is there a "Software Upgrade Underground" or "Mirror Site" for those who cannot afford the Service Contract? That's it! - No I am not a 3Com Spy JOhn :} ----- Whatever you do, work at it with all your heart, as working for the Lord, not for men >Colossians 3:23 (NIV) John C. Lange, Sr. PALACE dot NET, INC. microjl(a)palacenet.net MICRO-TECH Computers, Inc. 608.742.1601 & 6980 1819 New Pinery Road http://www.palacenet.net/ Portage, WI 53901 MSCE Training for only $150.00 - http://dpec.palacenet.net/ All 200+ Web Based Courses for $150.00 Per Year - "Really" --- __o --- _-\<,_ Fastest Service in Town --- (_)/ (_) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Problems with Total Control E1/PRI
by Jorge Lozano 04 Feb '00

04 Feb '00

Hi everybody! I have a Total Control System with a Dual E1/PRI card. I am using a couple of HDSL Higain... the E1 came up, but in the card I have the span 1 Lbk led solid in orange... Do you know what mean the lbk led in orange? Sincerelly, Jorge Lozano ------------------------------------------------ Este mensaje fue enviado usando Andinet WebMail. http://www.andinet.com/ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) YYYeeeoooowwwww!!!
by John Lange 04 Feb '00

04 Feb '00

I just re-subscribed to this list to see what kind of problems / chatter I would see. We are looking at adding 192 NEW ports and were considering USR as a provider. (Vendors please do not respond I have one in mind) You people whine about your TC's JUST AS MUCH as we whine about our PM3's. Looks like modem compatibility is just as bad as the PM3's Lucent's tech support is Free but sometimes difficult to get a human voice. TC's are $2k cheaper with the service contract than PM3's PM's OSPF works??? (At this point I don't need it) TC's chasis are upgradeable, with different cards Anyone have any other comparisons? Thanks JOhn :} ----- Whatever you do, work at it with all your heart, as working for the Lord, not for men >Colossians 3:23 (NIV) John C. Lange, Sr. PALACE dot NET, INC. microjl(a)palacenet.net MICRO-TECH Computers, Inc. 608.742.1601 & 6980 1819 New Pinery Road http://www.palacenet.net/ Portage, WI 53901 MSCE Training for only $150.00 - http://dpec.palacenet.net/ All 200+ Web Based Courses for $150.00 Per Year - "Really" --- __o --- _-\<,_ Fastest Service in Town --- (_)/ (_) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 5

(usr-tc) Hard Soft busy out commands
by Paul Farber 04 Feb '00

04 Feb '00

Hello all Trying to test individual channels on a new PRI. Whenever I selected a group of modems and either hard or soft busied them out (to test the hunt group), I would get busy, and not sequence through the huntgroup to the next open modem. All channels are up, am I not using the busy out commands correctly or will the hard/soft busy out 'break' a huntgroup? Thanks! Paul Farber Farber Technology farber(a)admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Hard Soft busy out commands
by Stainforth, Matthew 04 Feb '00

04 Feb '00

it should not be doing this if the telco's switch was paying attention to your out-of-service messages. You need to get the switch tech and possibly someone from translations to verify that your translation supports service messages. Matthew Stainforth || Technical Services Manager || BrunNet Inc. > -----Original Message----- > From: Paul Farber [mailto:farber@admin.f-tech.net] > Sent: Friday, February 04, 2000 1:26 PM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Hard Soft busy out commands > > > Hello all > > Trying to test individual channels on a new PRI. > > Whenever I selected a group of modems and either hard or soft > busied them > out (to test the hunt group), I would get busy, and not > sequence through > the huntgroup to the next open modem. > > All channels are up, am I not using the busy out commands correctly or > will the hard/soft busy out 'break' a huntgroup? > > Thanks! > > Paul Farber > Farber Technology > farber(a)admin.f-tech.net > Ph 570-628-5303 > Fax 570-628-5545 > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0