- USR-TC - mailman.xmission.com

(usr-tc) WTB :
by Steve Monkhouse 09 Feb '00

09 Feb '00

Hello. ! Looking to purchase immediately another Total Control Chassis with 2 x 70A power Supplies and integrated Fan tray.. has to be 220v compliant ( for Australia ).. please respond off list.. Steve Monkhouse - Network Engineer --------------------------------------------------------------------- EtherTech Computer Services Ph : +61-3-9768-2665 Fx : +61-3-9768-2664 http://www.ethertech.com.au - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) Entries in radius detail files
by pferraro＠wna-linknet.com 08 Feb '00

08 Feb '00

I just noticed that since upgrading one of our Hiper Arcs to 4.1.22 I now have "TWO" additional lines added to a user entry in my detail files. They are added immediately after the Framed-IP-Address entry: Vendor-Specific=vUSR-09837461298ybd8 Vendor Specific-vUSR-09837ykdf909 Can ANYONE tell me what in the world these are for? Can it be turned off? What is the use of these lines? Thanks in advance! ============================================================================== Phillip Ferraro WorldNet Access, Inc pferraro(a)wna-linknet.com Onslow County's PREMIER InterNet Service Voice (910) 346-0835 824 Gumbranch Square, Suite R3 FAX (910) 455-1933 Jacksonville, Nc 28540-6269 ============================================================================== - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Using the second ethernet port
by Mark Thornton 08 Feb '00

08 Feb '00

Can I use the second ethernet port for a private network (192.168.X.X) to access radius and snmp servers out of band from the standard route? I am apparently experiencing communication difficulties with my TCH's via the radius accounting and snmp. This is leading to problems with concurrency control. The software reports that the chassis is unreachable too many times during the day and proceeds to rebuild the active user list. I have been unable to detect the problem with any other application or test. Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) NMC Cards
by Brian 08 Feb '00

08 Feb '00

For those of you who have NMC cards that are v90 enabled. Alot of you are swithing out your quads with hdm's. If you have a chassis that has no more quads in it, it is really to your advantage to sell you v90 enabled NMC's, and buy non v90 enabled NMC's. Or better yet, try and upgrade to a HiperNMC. If you had say 50 chassis, and 25 are converted to HDM's, and of those 25 only half have hiper NMC's and the other half v90, you can sell the v90 nmc's and make a good profit and buy non v90 nmc's. They are in demand, and all they are doing is depreciating. You don't need a v90 nmc with hdm's. And for those that don't have a Hiper NMC, they are really nice, they seem to be alot faster than the older ones. Brian ----------------------------------------------------- Brian Feeny (BF304) signal(a)shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) WTB: 3Com Dual E1/PRI NIC/NAC Set
by Dataheart 08 Feb '00

08 Feb '00

Hi, I am Looking to buy 2 of these Dual E1/PRI Cardsets Must be 3com Part Number 0000397-05 I am Also looking to Purchase 5 V.90 Enabled NMC cards (NAC only) Thanks, Aaron - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) WTB: USR v90 NMC cards
by Steve Rivera 08 Feb '00

08 Feb '00

I will buy what you have NOW! Please advise of availability. Paid $500ea for the last 2 I bought. any- USR NMC card nac or as set nac/nic MUST BE V90 ENABLED .................................................... WR Communication Associates Worldwide Provider of Network Hardware Since 1981. I'm always available for your call...732-433-5890 Steve Rivera - sales(a)wrca.net v-732-833-2111 Office http://www.ISP-NetworkHardware.com or http://www.wrca.net ---ACCESS/TRANSMISSION SPECIALIST--- Cisco, Ascend, Livingston, USR, Microcom, Computone, Kentrox, Adtran...and more - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) SNMP questions...
by Mark Thornton 08 Feb '00

08 Feb '00

I am working with snmp and multiple workstations and am confused about the difference between "snmp community" and "snmp community pools" on the Arc. Can someone help me figure out the difference and how to determine the proper use of either? Thanks, Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Forcing DNS
by Justin Ellison 08 Feb '00

08 Feb '00

I have about 300 Setup CD's with the wrong primary and secondary DNS numbers burned to it. I can't come up with anything to redirect the DNS queries at my Cisco 1601 (not running BGP). I've got the HARC setup to assign DNS, and it works properly, but is there a way for me to force the client to use what the HARC specifies? TIA, Justin - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

8 10

(usr-tc) Weird logon problems
by Scot Desort 07 Feb '00

07 Feb '00

I have a customer with an LT winmodem v4.21. When she tries to connect, her username and password is trasmitted garbled: Outgoing PPP Data on interface: slot:2/mod:20 LCP CFG_ACK ASYNC_MAP 00 0a 00 00 MAGIC_NUM 00 87 00 1a PROTO_COMP AC_COMP Incoming PPP Data on interface: slot:2/mod:20 LCP CFG_ACK MRU 05 ea ASYNC_MAP 00 00 00 00 AUTH_TYPE c0 23 MAGIC_NUM eb 63 2f 0e PROTO_COMP AC_COMP Incoming PPP Data on interface: slot:2/mod:20 PAP REQUEST USERNAME = @².éäL«ò PASSWORD = ¡Y1 Outgoing PPP Data on interface: slot:2/mod:20 PAP NAK We have removed TCPIP, DUN, dialup adapter. Cannot figure this out. Any thoughts? -- Scot

2 1

(usr-tc) FS: USR TC NMC Card
by Brian 07 Feb '00

07 Feb '00

USR TC NMC Card, 16MB, not v90/x2 enabled. $200.00 ----------------------------------------------------- Brian Feeny (BF304) signal(a)shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0