April 2004 - USR-TC - mailman.xmission.com

Hidden commands
by alex 12 Oct '04

12 Oct '04

What does command _set memory threshold critical/high/low do? For what is this threshold used? P.S. (for them who dont know): to show hidden commands type "_reveal commands" and then type "?".

3 4

(no subject)
by Homer Pialda 20 May '04

20 May '04

usr gurus, i am using total control netsever 16 version 3.1.4, does this support session time-out attributes? i need it on our prepaid software to automatically disconnect our client when their time lapses during connection. pls __________________________________ Do you Yahoo!? Win a $20,000 Career Makeover at Yahoo! HotJobs http://hotjobs.sweepstakes.yahoo.com/careermakeover

3 4

[USR-TC] Trying To Prevent Virus Spread Need Help With Filters ASAP!
by Travis M. Best 08 May '04

08 May '04

Can Someone Provide Me With Detailed Instructions On How To Block Port 135 Both Incoming And Outgoing On My Chassis Including The Command To Exit Out Of The Editor Please Help Triyng To Prevent A Virus From Spreading Thanks Travis M. Best sysadmin(a)sunqwest.net -- This message has been scanned for viruses and dangerous content by SunQwest MailScanner, and is believed to be clean.

2 1

RE: [USR-TC] 3COM RAS 1000 software needed
by Adam Barnhill 28 Apr '04

28 Apr '04

Source-t.com Solunet.com Or buy directly from UTSTAR -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Arpad Toth Sent: Tuesday, April 27, 2004 4:32 AM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] 3COM RAS 1000 software needed Hello, my name is Arpad Toth and I am working in an ISP in Serbia and Montenegro (http://www.tippnet.co.yu/us/index.tts) Recently we have purchased a 3Com Total Controll Chasis with 2 HiPer DSP- E1/PRI cards and a Network Management Card (among others). We have found a "Software Matrix" on support.utstar.com and realised that the cards have old software versions (2.0.51 for the HiPer DSP, and 6.1.17 for the NMC). Can anybody sugess me a way to purchase newer versions? I think that would be 3.7.4 for the HiPer DSP, and 7.1.8 for the NMC. Thank You in advance! _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] TCM Error on E1 DSP ?
by Adam Barnhill 28 Apr '04

28 Apr '04

This is particularly true when using TCM 8.2.96 with any TCS version below 4.5 -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Joel - Fox Computers Sent: Tuesday, April 27, 2004 9:04 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] TCM Error on E1 DSP ? Had not even checked software versions on it yet. I'll give that a look. Thanks! -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Tuesday, April 27, 2004 7:43 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] TCM Error on E1 DSP ? Is the code running on the NMC within the same release version as total control manager? I've had issues pulling up chassis's or certain things when running at different version levels. Todd ----- Original Message ----- From: "Joel - Fox Computers" <jfox(a)foxcomputers.com> To: <usr-tc(a)mailman.xmission.com> Sent: Monday, April 26, 2004 11:13 AM Subject: [USR-TC] TCM Error on E1 DSP ? > > Having a problem. Trying to help someone out configuring a chassis, and I can't access a 30 channel DSP (E1 version) with my TCM. > > Here's the error: > > I click the lights at the top of the card. Click Configure->Programmed Settings, and get an error message that says "Error Opening Device Description File". > > Anyone have any suggestion, or the correct file I need to make it work? > > Thanks, > > Joel > > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] TCM Error on E1 DSP ?
by Joel - Fox Computers 27 Apr '04

27 Apr '04

Had not even checked software versions on it yet. I'll give that a look. Thanks! -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Tuesday, April 27, 2004 7:43 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] TCM Error on E1 DSP ? Is the code running on the NMC within the same release version as total control manager? I've had issues pulling up chassis's or certain things when running at different version levels. Todd ----- Original Message ----- From: "Joel - Fox Computers" <jfox(a)foxcomputers.com> To: <usr-tc(a)mailman.xmission.com> Sent: Monday, April 26, 2004 11:13 AM Subject: [USR-TC] TCM Error on E1 DSP ? > > Having a problem. Trying to help someone out configuring a chassis, and I can't access a 30 channel DSP (E1 version) with my TCM. > > Here's the error: > > I click the lights at the top of the card. Click Configure->Programmed Settings, and get an error message that says "Error Opening Device Description File". > > Anyone have any suggestion, or the correct file I need to make it work? > > Thanks, > > Joel > > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

TCM Error on E1 DSP ?
by Joel - Fox Computers 27 Apr '04

27 Apr '04

Having a problem. Trying to help someone out configuring a chassis, and I can't access a 30 channel DSP (E1 version) with my TCM. Here's the error: I click the lights at the top of the card. Click Configure->Programmed Settings, and get an error message that says "Error Opening Device Description File". Anyone have any suggestion, or the correct file I need to make it work? Thanks, Joel

2 1

3COM RAS 1000 software needed
by Arpad Toth 27 Apr '04

27 Apr '04

Hello, my name is Arpad Toth and I am working in an ISP in Serbia and Montenegro (http://www.tippnet.co.yu/us/index.tts) Recently we have purchased a 3Com Total Controll Chasis with 2 HiPer DSP- E1/PRI cards and a Network Management Card (among others). We have found a "Software Matrix" on support.utstar.com and realised that the cards have old software versions (2.0.51 for the HiPer DSP, and 6.1.17 for the NMC). Can anybody sugess me a way to purchase newer versions? I think that would be 3.7.4 for the HiPer DSP, and 7.1.8 for the NMC. Thank You in advance!

1 0

Total Control Manager
by Greg Coffey 26 Apr '04

26 Apr '04

I have been out of the loop for a while regarding the old USR/3Com/ whatever its called today but need to obtain a copy of the Manager software to configure the chassis. I've looked on the 3Com site and searched the web to no avail. I don't know how many copies of that I once had but can't come up with one now. I'd appreciate if someone could point me to a site that has it. Doesn't have to be the latest, greatest, just something that I can look at a couple of DSP's. Thanks. Greg

1 0

Looking for qty 1 Hiper NMC
by Russell Newberry 26 Apr '04

26 Apr '04

Anybody have one of these at a decent price? Thanks, Russell Newberry ==================== Maxis Technologies, Inc 433 W. Wilshire Blvd. Ste 2B Oklahoma City, OK 73116 Voice: 1-800-79-MAXIS Int'l: 1-405-842-3331 FAX: 1-405-841-7882 find us on the web at www.maxistech.net email to: russell(a)maxistech.net AOL IM "RUSSELLatMAXIS"

1 0