June 2003 - USR-TC - mailman.xmission.com

reported span density
by Lewis Bergman 13 Jun '03

13 Jun '03

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Is the below nornaml for a T1 with 24 channels or should the span density report 24? I know you can set it to anything between 1 and 32. I assume the below is the default since I have never messed with it. Anyone have a clue? HiPer>> show pbu setTINGS PBUS SETTINGS Reported Base: 1 Port Density: 256 Span Density: 31 Span Density Style: GLOBAL No of Spans/Slot format: Slot No : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 No Of Spans : 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+6RtwpT00mQjG01gRAgJ6AJ9ieUIJY9a7FBPZ/GLB5YfJCdjfzACdE9zN 8KC7kAU2zMFRLzJ4SzDWNJM= =5ysV -----END PGP SIGNATURE-----

1 0

Weekly 3Com Hiper Blowout POST!!
by sky1 12 Jun '03

12 Jun '03

Still have fully loaded Hiper chassis in stock!!! $2750.00 each Configured as follows: (14) Hiper DSP T-1 card sets (2) Hiper ARC 128Mb Version card sets (1) Hiper NMC (2) 130 Amp AC power supplies (1) Blue Labeled chassis w/ integrated fan assembly I also have a few more Hiper NMC's that I am parting out. Have around 10 of them I'd sell for $450.00 each Hiper DSP cards T-1 Version $175.00 each Hiper ARC sets 128Mb Version $100.00 each Thanks for your time, Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com

1 0

NMC memory in NETServer
by alex 10 Jun '03

10 Jun '03

Is it possible to place NMC's DRAM memory card into NETServer PRI? NMC is old NMC_CLK. Thanks, Alex

1 0

TCS 4.5 vs. 4.7
by Mike Wilker 09 Jun '03

09 Jun '03

Is there any difference in the modem code/features between the lastest 4.5 and 4.7 DSP firmware? Mike Wilker Director of Network Operations Tiger Communications & Local Link

1 0

Release notes
by Mike Wilker 09 Jun '03

09 Jun '03

Are release notes no longer being given for service releases of TC1000 software? A couple of years back they used to be there and they were very helpful. Mike Wilker Director of Network Operations Tiger Communications & Local Link

1 0

2 NETServers in one chassis?
by alex 04 Jun '03

04 Jun '03

Is it possible to install 2 NETServers in one chassis with Quad analog modems? If yes what/how do I have to configure on this netservers and quads (NETServer Card V.34/ISDN with Frame Relay V3.8.1)?

1 0

HiperARC IP terminal service
by Gen Camiling 04 Jun '03

04 Jun '03

Hi All, I want to use the HARCs as a replacement for some old,EOLd IBM Terminal servers. I plan to use IP Terminal Service feature of the HARC, my problem though is it keeps on asking for a login/password combo prior to getting connected. Is there a workaround wherein once the dialin client calls will be automatically connected to the HARC and gets a prompt (Hiper>>) from which they can TELNET to other hosts? -- Best regards, Gen =================================== Gener R. Camiling Chief Technical Officer International Micro Village, Inc. http://www.imvi.com.ph ===================================

2 1

Question about Quad Modems D/A and outdials...
by Todd Williams 04 Jun '03

04 Jun '03

Hello, We're using a TC1000 chassis with some Quad Modem digital/analog v.90 cards as modems (via RS-232 card) dialing out over PRI for a legacy outdial application which dials out to a variety of ISDN and POTS modems. We seem to be having some strange issues when dialing some of the old Motorola Codex 33.6K modems. Does anyone have any experience in this area, or have you seen any compatibility issues between these modems (or others)? Thanks in advance for any assistance or advice you might be able to offer. Thanks, Todd

3 2