December 2003 - USR-TC - mailman.xmission.com

RE: [USR-TC] NAS Port questions
by Joel - Fox Computers 10 Dec '03

10 Dec '03

I know for a fact that works when you only have Hiper DSP's - but beyond that I'm not sure. - Joel -----Original Message----- From: Adam Barnhill [mailto:adam@semo.net] Sent: Tuesday, December 09, 2003 4:21 PM To: usr-tc(a)lists.xmission.com Subject: [USR-TC] NAS Port questions Importance: High Hi guys, I wonder if any of you know the formula to calculate the NAS port. The formula in the UTstar Knowledgebase doesn't seem to be accurate for us. That formula is NAS port = [256 * slot number] + channel number. This formula doesn't work for any of our boxes. We have both MultiSpan and Non-Multispan TCs. This formula doesn't allow for Multispans but it doesn't work on our "low density" boxes either. We are running ARC 5.3.110 on our Multispan boxes, and 5.2.102 on our Non-Multispan boxes. Any help would be appreciated. -- Adam Barnhill Support Engineer, TotallyFabricated.com Information Technology Engineer, Poplar Bluff Internet, Inc. / Semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114, < <http://www.semo.net/> http://www.semo.net/> Home of TotallyFabricated.com the creators of Total Scrutinizer _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

NAS Port questions
by Adam Barnhill 09 Dec '03

09 Dec '03

Hi guys, I wonder if any of you know the formula to calculate the NAS port. The formula in the UTstar Knowledgebase doesn't seem to be accurate for us. That formula is NAS port = [256 * slot number] + channel number. This formula doesn't work for any of our boxes. We have both MultiSpan and Non-Multispan TCs. This formula doesn't allow for Multispans but it doesn't work on our "low density" boxes either. We are running ARC 5.3.110 on our Multispan boxes, and 5.2.102 on our Non-Multispan boxes. Any help would be appreciated. -- Adam Barnhill Support Engineer, TotallyFabricated.com Information Technology Engineer, Poplar Bluff Internet, Inc. / Semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114, < <http://www.semo.net/> http://www.semo.net/> Home of TotallyFabricated.com the creators of Total Scrutinizer

1 0

Digital/Analog Quad Card w/Daughter no analog?
by Dev 09 Dec '03

09 Dec '03

Hello all, I have seen several post about setting a Digital/Analog Quad Card up to allow POTS lines but none have addressed my issue. My Issue is that in the TCM I have an option to set the line interface source to: (1) = nic (2) = t1Tdm (3) = priTdm The problem is that the NIC setting will not set! I can go back and fourth between t1 Tdm and pri Tdm. What am I missing?

3 4

Re: [USR-TC] Need help with Hiper DSP code upgrade
by Stephen Rivera - WRCA.Net 05 Dec '03

05 Dec '03

There are instances where you have to work up in increments. try to use a version between 2.1.85 and what you are trying to put in now. At 09:03 AM 12/2/2003 -0500, you wrote: >Content-Class: urn:content-classes:message >Content-Type: multipart/alternative; > boundary="----_=_NextPart_001_01C3B8DD.066D13D0" > >Group > > I m trying to get V.92 code on my modem rack. I m getting an error when > upgrading the DSP code. Here is my hardware > > > > > >DSP code 2.1.85 > >Hiper ARC code 5.3.2 > >Hiper NMC code 8.6.3 > > > > > > > >I get an error upgrading the dsp code to 3.5.2 Its some TFTP error. > > > >Any help would be great. > > >_______________________________________________ >USR-TC mailing list >USR-TC(a)mailman.xmission.com >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

3 2

Despite Session-Timer = 86400 longer call-durations...
by Oliver Francke 05 Dec '03

05 Dec '03

Hi list, did anyone ever got aware of connections, where a per RADIUS-configured: Session-Timeout = 86400 seconds has been exceeded for something in the range of 150-160 seconds? Call-duration in SNMP and syslog-events match in this ( rare) cases. Ideas welcome. Oliver. -- Oliver.Francke(a)telefonica.de fon. +49-5246-80-1389 mob. +49-171-5597734 I used to have a sig, but I've stopped smoking.

1 0

RE: [USR-TC] Need help with Hiper DSP code upgrade
by Hall, Eric M. 04 Dec '03

04 Dec '03

I upgraded my ARC and NMC ok just the dsp failed -----Original Message----- From: alex [mailto:alex@wanex.ge] Sent: Tuesday, December 02, 2003 10:54 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] Need help with Hiper DSP code upgrade And more: If nothing helps check that your nmc can connect to your computer (tftp port is not blocked, etc). Stephen Rivera - WRCA.Net wrote: > There are instances where you have to work up in increments. try to > use a version between 2.1.85 and what you are trying to put in now. > > > At 09:03 AM 12/2/2003 -0500, you wrote: > >> Content-Class: urn:content-classes:message >> Content-Type: multipart/alternative; >> boundary="----_=_NextPart_001_01C3B8DD.066D13D0" >> >> Group >> >> I m trying to get V.92 code on my modem rack. I m getting an error >> when upgrading the DSP code. Here is my hardware >> >> >> >> >> >> DSP code 2.1.85 >> >> Hiper ARC code 5.3.2 >> >> Hiper NMC code 8.6.3 >> >> >> >> >> >> >> >> I get an error upgrading the dsp code to 3.5.2 Its some TFTP error. >> >> >> >> Any help would be great. >> >> >> _______________________________________________ >> USR-TC mailing list >> USR-TC(a)mailman.xmission.com >> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > >----------------------------------------------------------------------- >- > >_______________________________________________ >USR-TC mailing list >USR-TC(a)mailman.xmission.com >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

4 5

RE: [USR-TC] syslog messages
by Todd Bertolozzi 04 Dec '03

04 Dec '03

Also....when I look at the modem stats for some of these interfaces...at least the successful and failed connects...there doesn't look like there's any problems. Todd -----Original Message----- From: Todd Bertolozzi [mailto:berto@voyager.net] Sent: Thursday, December 04, 2003 10:53 AM To: 'Discussion relating to the 3Com/US Robotics Total Control modemsystems.' Subject: RE: [USR-TC] syslog messages What makes me think it's the user and not necessarily the modem is that it seems to follow particular users. For example....I was seeing these log messages for a particular interface at a particular site all day long. The same user was connected on that interface all day as well. As soon as I kicked him offline the logs for that interface stopped and I haven't seen any really come in again for that particular interface. I could be wrong but that's why I was leaning towards that. What makes you think the modems are bad? Are you familiar with these particular syslog messages Lewis? It doesn't seem obvious to me that these are problematic modems....how sure are you about these logs? Is there another facility such as GWC Modem Driver that could possibly verify this? Thanks for you input/help. Regards, Todd -----Original Message----- From: usr-tc-bounces(a)mailman.xmission.com [mailto:usr-tc-bounces@mailman.xmission.com] On Behalf Of Lewis Bergman Sent: Thursday, December 04, 2003 9:09 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] syslog messages -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wednesday 03 December 2003 12:55 pm, Todd Bertolozzi wrote: > Hey Folks, > > I know this question was presented at one time or another but I have yet to > see any responses so I thought I'd try again and see if anyone can shed > some light so to speak. > > I'm seeing packets come into syslog from various nas's (hiper arcs) with > the following info: > > Dec 3 13:57:01 as2 --syslog capture: 14000602 slot:3/mod:7 --syslog > capture:stop > Dec 3 13:57:03 as2 --syslog capture: 0700020c slot:13/mod:3 --syslog > capture:stop > Dec 3 13:57:12 as2 --syslog capture: 14000602 slot:3/mod:7 --syslog > capture:stop > Dec 3 13:57:16 as1 --syslog capture: 58010a01 slot:2/mod:11 --syslog > capture:stop > > The one thing I notice is that the majority of them are regarding > particular interfaces per nas. Meaning I get these types of logs over and > over again.....but usually regarding the same interface (i.e. slot:3/mod:7) > in the example above. I don't believe it's necessarily pertaining to that > inferface but to the user connected on that interface. What makes you think that it is related to a user or users and not an interface? I assume your users don't have assigned phone numbers and that your TC isn't fronted by a switch (or telco) that is routing DID's to a specific channel on a span. If those are correct you have modems on those cards going bad. Make sure the settings for those are the smae as the rest. If they are, take those modems out of service or replace the card. - -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE/z0AL7++zav7/K8QRAoPBAJ9c3iLEnO17yKUQlv9PTZV+pcVA2ACgjFjn aACu0rT7lg2UrFHJSqVR8+c= =q/cF -----END PGP SIGNATURE----- _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

Re: [USR-TC] Corrupted Flash, diagnostic power-up failure
by teddy＠peugeot504.net 04 Dec '03

04 Dec '03

Quoting Gen Camiling <gcamiling(a)imvi.com.ph>: > Hi there, > > im upgrading code for hiperdsp, downloading was succesful but upon > boot-up of the card this is what i got: > > > Flash Image Has Valid CRC, Loading Image.... > > Diagnostic Power-Up Failure > > Manufacturing Info -> 1AAA13M0 > Mode/Env -> 1/0 > Fault Code -> 0-8-25-1 > Expected Data -> f005400c > Received Data -> f0054004 > Text Message -> Address Equals Data Test Failure > Info Message -> Second read failed. Hard error indicated. > > Questions: > 1. If the Flash gets corrupted and you tried re-flashing and still > card does not come up, is there a way to salvage the card or is it > good as hardware failure (dead)? Youp, Your DSP is Dead, cause Me Too :-( Rgds, -ts- > > 2. Is there a list/link/copy where we can interpret such fault code > like the one stated above? > > > -- > Best regards, > Gen > > > =================================== > Gener R. Camiling > Chief Technical Officer > International Micro Village, Inc. > http://www.imvi.com.ph > =================================== > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc >

1 0

Need help with Hiper DSP code upgrade
by Hall, Eric M. 02 Dec '03

02 Dec '03

Group I'm trying to get V.92 code on my modem rack. I'm getting an error when upgrading the DSP code. Here is my hardware DSP code 2.1.85 Hiper ARC code 5.3.2 Hiper NMC code 8.6.3 I get an error upgrading the dsp code to 3.5.2 Its some TFTP error. Any help would be great.

2 1

Need help with Hiper DSP code upgrade
by Hall, Eric M. 02 Dec '03

02 Dec '03

Group I'm trying to get V.92 code on my modem rack. I'm getting an error when upgrading the DSP code. Here is my hardware DSP code 2.1.85 Hiper ARC code 5.3.2 Hiper NMC code 8.6.3 I get an error upgrading the dsp code to 3.5.2 Its some TFTP error. Any help would be great.

1 0