March 2002 - USR-TC - mailman.xmission.com

only 56k ISDN connections to DSP...
by Scott Trautman 20 Mar '02

20 Mar '02

Hi-- I just moved off my final Dual PRI/Netserver (yeah!), and in the move, I've found that a goodly number of my ISDN customers can only make 56k (analog?) calls - 64k calls are rejected. Yet others ARE able to make 64k calls no problem. Sample size, Livingston office router, Netopia R3100, in both cases 56k connections. Yet, same types of equipement, 64k connections. I'm using 1.3.7 on the DSP. Can anybody give any hints of where I can look/testing I can do to figure this out? SMT Scott M. Trautman President/Owner Global Dialog Internet scott(a)gdinet.com http://www.gdinet.com 2810 Crossroads, Suite LL2 Madison WI 53718 608-240-4638/800-482-4638 608-240-3637fax The Best in Broadband, Hosting and Dialup Internet Solutions for South Central and Eastern Wisconsin since 1995

1 0

(no subject)
by albert 20 Mar '02

20 Mar '02

2 1

Complete TC newbie-Any insight welcome
by Damian Dunphy 19 Mar '02

19 Mar '02

My Application is quite simple, I need dialup support for an initial 60 ports modem and ISDN, service will be delivered over E1 PRI's and ideally I would like to have my backhaul to my main POP to be run by the total control box it would need to connect to a CISCO on a 128k or 256k leased circuit. What do I need to achieve this in terms of TC hardware and what concerns do I need to have re: release versions ? I'm thinking of buying second hand, is this likely to provide issues ? What are the issues with v.92 on the TC boxes ? Would it be simpler to just run a Cisco to Cisco connection for backhaul ? Thanks Damian [Virus scanned by SunBeach - http://www.sunbeach.net]

1 0

FS: v92 Total Control Compatible Hardware
by Stephen Rivera - WRCA.Net 18 Mar '02

18 Mar '02

WRCA.Net has the following available: We've got it all in Total Control, here's a teaser :) High Density Blue Chassis with Dual 130A power $6500 or BO Hiper NMC Hiper ARC (128MB) 2x Hiper DSP Hiper DSP sets $1200 Hiper ARC sets 128MB Netserver 16 v34 $650 MP 16 v34 $295 Steve Rivera 732-833-2111 x102 IM: srivera711 732-833-2115 fax for more product info got www.wrca.net Jackson, NJ 08527 (USA)

1 0

finding status of bugs
by Antonio Querubin 13 Mar '02

13 Mar '02

Does anybody know of a way to find the status of a specific bug on the commworks website? In particular I'm trying to find out whether bug ID MR12019 has been resolved in the latest HiPer ARC code. The release notes don't mention it at all.

4 7

HARM 2.2.6 ??
by Mike Greene 13 Mar '02

13 Mar '02

Does anybody have a copy of this software, my copy is corrupt and I need to re-install to manage my ARC. My contract expired and I'm not to keen on renewing just so I can get this archive. Please email direct, I'm on the digest version of this list. Thanks! - Mike ------------------------------------------------ Rock Island Communications, Inc. (360)-378-5884 http://www.rockisland.com/ San Juan Islands, WA ------------------------------------------------

1 0

RE: [USR-TC] Netserver/16+ help
by RickL＠solunet.com 12 Mar '02

12 Mar '02

Brian, I know Netserver 16's run ComOs (Portmaster code) and Netserver16+ runs pilgrim (ARC code). It is possible to make one into the other. Not sure of the availability of the code as Netservers are long EOL'd. Try this link: http://support.3com.com/software/remoteaccess_swlib.htm Rick Team Solunet -----Original Message----- From: Brian [mailto:signal@shreve.net] Sent: Thursday, March 07, 2002 9:04 PM To: USRobotics TC Mailing List Subject: [USR-TC] Netserver/16+ help I have a few questions regarding a Netserver/16+. I have one coming to me in a few days I have to configure. I have never configured one of these before but I have lots of expereince in Netserver and HiperARC total control hubs. Can anyone send me a sample config or point me to a reference/manual on the web that may be helpfull? Also whats the difference between a Netserver/16 and Netserver/16+? Whats the latest code these had? Thanks! Brian ----------------------------------------------- Brian Feeny, CCIE #8036 e: signal(a)shreve.net Network Engineer p: 318.222.2638x109 ShreveNet Inc. f: 318.221.6612 _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] V.92 and Teleco
by RickL＠solunet.com 12 Mar '02

12 Mar '02

Steve, If your Telco supports call-waiting (which you activate with a "flash" of the hook switch), you should be fine. That's all that is happening...you flash the hook switch (via the v.92 MOH control panel) and your modem will go into a re-train type of state. When you do another "hook switch flash", your modem will retrain and connect back up. Kind of sneaky/tricky...not rocket science. Rick Team Solunet -----Original Message----- From: Steve Johnson [mailto:linuxnut@sonic.net] Sent: Thursday, March 07, 2002 2:41 PM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] V.92 and Teleco Does the teleco need to support anything special in order for us to support V.92. Assuming I have all the hardware, all the firmware upgrades for V.92, am I still limited to V.90 by my teleco? The reason I'm asking is because of the increased upload speed, seems the reason for the limited upload speed on V.90 was due to CO limitations. Also what about internet on hold features? Does it have to be supported by the CO? V.92 may not be worth upgrading to if my Teleco does not support this stuff =). We use PacBell in N. Calif. -Steve _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

routing from one HiperArc to another
by Mike Wilker 12 Mar '02

12 Mar '02

Does anyone know how I can set up one Hiperarc to dial into another one with multiple channels so I can route across the connection? I'd be dialing out from PRIs and into channelized T1s. Thanks. Mike Wilker Director of Network Operations Tiger Communications & Local Link USA

1 0

RE: [USR-TC] Dual PRI NAC Password
by SWujek＠solunet.com 11 Mar '02

11 Mar '02

Hi Robert, First, see if you have DIPswitch 4 set to the ON position. If you do then set it to OFF and reboot the card. That may remove it. If that fails, try the default password which is "intotalcontrol" with DIPswitch 4 set to the ON position. Once you enter that it should prompt you for a new password. You'll have to experiment if the above fails to work and keep in mind that you may lose your configuration completely and have to start from scratch!!! Thanks, Steve Solunet TAC -----Original Message----- From: Robert Jimenez [mailto:rob@singlepoint.net] Sent: Friday, March 08, 2002 12:04 PM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] Dual PRI NAC Password I've got a dual PRI NAC that I can't figure out how to reset the password on it. If anyone knows of a way to reset it, please e-mail me ________________________________ Robert Jimenez Singlepoint Resources http;//www.singlepoint.net Phone: SLC 801.521.3000 Park City 435.647.0808 Toll-Free 866.521.3800 Fax: 801.521.3003

1 0