August 2001 - USR-TC - mailman.xmission.com

(usr-tc) OSPF sendpolicy question/problem
by Charles Sprickman 28 Aug '01

28 Aug '01

Hi, I'm running ARC 4.2.32, and I'm seeing some odd things with OSPF and sendpolicy matching. For example, here's my current sendpolicy: HiPer-1>> list osPF seNDPOLICY OSPF Send Policies: Source Address/Mask Action LOCAL x.x.193.000/C Advertise LOCAL x.x.195.000/C Do Not Advertise LOCAL x.x.197.000/C Do Not Advertise LOCAL x.x.199.000/C Advertise If I put a test user in x.x.193.0/24 somewhere, the host route is propogated to the neighbor (Cisco) fine. If I put the test user in x.x.199.0/24, it is not. Looking at the database on the cisco, I do not see the route at all. If I remove all the sendpolicy's, the x.x.199.x user's host route does propogate. I also have the two class C's that I do NOT want advertised, and the arc is spewing all the /32's at the cisco. O E1 x.x.195.17/32 [110/11] via x.x.208.3, 00:04:07, Ethernet0 O E1 x.x.195.19/32 [110/11] via x.x.208.3, 01:44:01, Ethernet0 O E1 x.x.195.29/32 [110/11] via x.x.208.3, 00:31:21, Ethernet0 O E1 x.x.195.30/32 [110/11] via x.x.208.3, 00:28:10, Ethernet0 O E1 x.x.195.25/32 [110/11] via x.x.208.3, 00:00:14, Ethernet0 O E1 x.x.195.26/32 [110/11] via x.x.208.3, 01:41:09, Ethernet0 O E1 x.x.195.27/32 [110/11] via x.x.208.3, 00:12:11, Ethernet0 Is this functionality just broken? I've not been brave enough to enter the world of 5.x arc code yet, and I don't want to go there unless I know it fixes any serious OSPF issues besides the DR/BDR problem... More ospf config info: on cisco, the arc's area is a stub. on arc: HiPer-1>> show osPF gloBAL GLOBAL OSPF SETTINGS Router ID: x.x.208.3 Administrative Status: ENABLED OSPF Version Number: 2 Area Border Router Status: DISABLED Autonomous System Border Router Status: ENABLED Type-of-service (TOS) Support: OFF External LSDB Limit: -1 Multicast Extensions Support: OFF Exit Overflow Interval: 0 Router's Support for OSPF Demand Routing: OFF OSPF Traps: DISABLED HiPer-1>> show osPF inTERFACE x.x.208.3 OSPF INTERFACE SETTINGS Interface IP Address: x.x.208.3 Addressless Ifindex: 0 Area ID: 0.0.0.1 Interface Type BC Administrative Status: ENABLED Router Priority: 0 Transit Delay: 1 Retranmit Interval: 5 Hello Interval: 10 Router Dead Interval: 40 OSPF Interface State: OtherDsgRtr Designated Router Address: x.x.208.1 Backup Designated Router Address: NONE Authentication Type: None OSPF Interface Demand: OFF OSPF Interface Metric TOS: 0 OSPF Interface Metric Value: 10 Any ideas? Thanks, Charles | Charles Sprickman | Internet Channel | INCH System Administration Team | (212)243-5200 | spork(a)inch.com | access(a)inch.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) OSPF problems
by Charles Sprickman 28 Aug '01

28 Aug '01

Hi, I'm running ARC 4.2.32, and need to set up a very simple ospf setup for static IP customers. The other end is a cisco router. Doing a debug on the cisco shows me this: OSPF: Hello from 216.223.208.3 with mismatched Stub/Transit area option bit OSPF: Send with youngest Key 2 OSPF: Hello from 216.223.208.3 with mismatched Stub/Transit area option bit OSPF: Send with youngest Key 2 Eh? Any ideas? Is OSPF broken or can I not make the USR a stub? Charles | Charles Sprickman | Internet Channel | INCH System Administration Team | (212)243-5200 | spork(a)inch.com | access(a)inch.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 3

(usr-tc) Callback w/Harc
by Jóhannes Rögnvaldsson 27 Aug '01

27 Aug '01

Hi My system has: Dual Pri HARC 3Com SA server (forwards auth req to ACE server) Has anyone successfully set up a system with callback! When I define a callback user locally on the HARC I get disconnected immediately, the HARC calls back but the dialin client doesn't answer because the session was disconnected immediately! add user "test" password "test" type network,callback set user test phone_number "5555555" When I try to do this on the SA server it seems to have no effect at all, the user type is "framed,callback", I set the callback phone number in the "callback" window. I dial in and get connected right away. I don't even get disconnected. Thanks Johannes Rognvaldsson LAN/WAN Specialist EJS hf - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) New list member
by Doug_Hensley＠GENERALHEALTH.ORG 24 Aug '01

24 Aug '01

Good afternoon to the list. I'm not sure whether anyone is on here now or not. I am about to put back into service a USR TC rackmount 32 and seeking software, software updates, etc. for same. Thanks in advance for any leads, Doug Hensley System Engineer PHNS Baton Rouge - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) Flashing Hyper Arc
by Jonathan Byrne 24 Aug '01

24 Aug '01

Steve Johnson (linuxnut(a)sonic.net) wrote: > smoothly untill I hit 80% then I get an TFTP error, Access Violation and it I see also, but see it a lot less on 128 meg ARCs. If it's nearby, I just go there and flash it over the console port, which works fine. Cheers, Jonathan -------- <PLUG TYPE="shameless"> Leaving Japan end of September, available for employment in California. </PLUG> - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) FS: USR/3Com Total Control, MP, Netservers and more.
by Mark E. Levy 15 Aug '01

15 Aug '01

> WTB: HIPER NMC sets I need to upgrade to the P5 HiperNMC. I currently have the 486-based Hiper NMC. Please quote a price for the upgrade. -- Mark E. Levy FSInet, Inc. 800-827-6085 x202 847-753-6832 fax www.fsi.net mark(a)fsi.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FS: USR/3Com Total Control, MP, Netservers and more.
by ISP-NetworkHardware.com 15 Aug '01

15 Aug '01

WRCA.Net has the following available. All refurbished with 30 day warranty. Hiper DSP T1 $1500 Hiper DSP E1 $2500 Hiper ARC's $1000 EdgeServer PRO $1000 ADSL CellMux $500 WTB: HIPER NMC sets NMC V90 Netserver PRI Dual T1/E1 Dual PRI AS5100 Router cards Quad Digital Modems Quad Analog Modems Wuad Analog/Digital Modems Chassis's Fan Trays 70A power supplies Netserver 16 v34 Netserver 16I (international Version) Netserver 8I Netserver 8 v34 MMP16 v34 MP16 v34 MP8 v34 Call or email for further pricing. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) SNMP on NetServer Card,NMC and Chassis
by Michael Smirnov 14 Aug '01

14 Aug '01

I have a TotalControl 1000 with NetServer Card, NMC and some analog Quad Modem Cards. A twisted-pair cable is connected to Netserver Card, but NMC is not connected to a cable at all. There is a MIB file ftp://ftp.3com.com/pub/rapd/usr_nets.zip However, 1.3.6.1.4.1.429.4.10.1.1.18 enterprises.usRobotics.common.usrCip.usrCipPortParamTable.usrCipPortParamEnt ry.usrCipUserName doesn't work when I try to use it on a NetServer Card's IP address :-((( I found that on my NetServer Card there is no OIDs, beginning with 1.3.6.1.4.1.429 Using a network scanner, I found something with another IP address: 3Com 17-Slot Chassis with PB clocking Ther are some OIDs beginning with 1.3.6.1.4.1.429, but 1.3.6.1.4.1.429.4.10.1.1.18 doesn't exist :-(((( What should I do to make this OID work? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) connect string of Analog QMCs
by Michael Smirnov 14 Aug '01

14 Aug '01

I have a TotalControl 1000 with NetServer Card and some analog Quad Modem Cards. Is there a way to get a modem "CONNECT" string via SNMP or whatever? It contains many useful info I'd like to log. I will try to do it in a script which executes on Radius auth packets. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) FS: Used Total Control Equipment.
by Thomas_Goodman＠3com.com 13 Aug '01

13 Aug '01

Greg, Your used equipment is worth more than you are asking and it does not have HiPer NMCs required for v.92. CommWorks has rebate programs that can net you more cash if you purchase new gear to replace what you are selling. Note: $8200 for 5 HiPer DSPs or 120 ports is $68/port If you purchase a Multi-Span Chassis (96 ports, Dual 130A, New ARC, 333MHz NMC and a Multi-Span Card (96 ports) 192 ports total you can get the following rebates. $90 x first 96 ports in chassis bundle = $8640 $40 x second 96 ports = $3840 Total = $12,480 in rebates or $65/port @ 192 ports (The rebate/port slides as you add additional blades to the same base unit) Since you have 7 total HiPer DSPs for sale x 24 port = 168 ports $90 x first 96 ports in chassis bundle = $8640 $40 x second 72 ports turned in = $2880 Total = $11,520 or $68.57/port There is also a program for Quad Card Upgrades to HiPer @ $50 on Double Plays or $75 per port on HiPer Starter Bundles and you can also move all the way to the Multi-Span at the $40 on Multi-Span Blades and $90 on Multi-Span Chassis See the web sites for rules/descriptions and forms. http://www.commworks.com/svprovider/programs/total_control_eds/promos.html Call your authorized reseller to see if we can put together a better deal then selling off used or buying used. Thanks, Tom Goodman thomas_goodman(a)3Com.com CommWorks Channel Sales 847-262-1039 Jason Percle <jjperc(a)petronet.net> on 08/10/2001 02:35:51 PM Please respond to usr-tc(a)lists.xmission.com Sent by: Jason Percle <jjperc(a)petronet.net> To: usr-tc(a)lists.xmission.com cc: (Thomas Goodman/MW/US/3Com) Subject: (usr-tc) FS: Used Total Control Equipment. We have the following used equipment for sale: Total Control Chassis - $8200, includes: Integrated Fan Tray. 5 - HiperDSP Cards. 1 - HiperARC Card. 1 - NMC Card. 2 - 70A Power Supplies. Total Control Chassis - $4500, includes: Integrated Fan Tray. 2 - HiperDSP Cards. 1 - HiperARC Card. 1 - NMC Card. 1 - 70A Power Supply. Total Control Chassis - $1500, includes: Fan Tray. 1 - Dual PRI Card. 5 - Quad Digital Modems. 7 - Quad Digital/Analog Modems. 1 - Netserver/PRI Card. 1 - NMC Card. 2 - 45A Power Supplies. Total Control Chassis - $700, includes: Fan Tray. 6 - Quad Digital/Analog Modems. 1 - Netserver/PRI Card. 2 - 45A Power Supplies. *Needs a Dual PRI/T1 Card and NMC Card. If interested or any inquiries, email ggreen(a)petronet.net or call 985-385-2219 - ask for Greg. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1