August 2001 - USR-TC - mailman.xmission.com

RE: (usr-tc) NMC not responding
by Mark E. Levy 06 May '03

06 May '03

I;ve had this happen a few times. Just reboot the NMC card by sliding it out if the chassis or via the console interface and it will be well again (until next time). Rebooting the NMC won't affect active users sessions. --------------------------------------------------------------------- Mark E. Levy, President FSInet, Inc. | System Management Associates, Inc. 800-827-6085 x202 | 847-291-1550 x202 847-753-6832 fax | 847-291-3866 fax www.fsi.net | www.sysman-inc.com mark(a)fsi.net | levy(a)sysman-inc.com --------------------------------------------------------------------- > -----Original Message----- > From: Jeff Mcadams [mailto:jeffm@iglou.com] > Sent: Friday, June 08, 2001 9:51 AM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) NMC not responding > > > Also sprach Kirk Mitchell > > My NMC recently stopped responding to SNMP queries, etc and I'm > >unable to access it via TCM. It has, however, not seemed to affect > >anything as far as dial-up, routing, etc. Other than the fact that I > >can't run MRTG against it or the badmodems.pl script, there's no > >indication that it's having problems. > > Not surprising. The NMC does not have anything to do with the routine > actions of taking and handling calls...it is what it says it > is...purely > a management card. You can totally remove the NMC and not lose any of > the actual *production* functionality of the chassis. > > > Has the card gone bad...need replaced, lost something in part of > >config? How do I go about finding/fixing the problem? > > Proly just needs a reboot, or possibly a reconfig...I've had > a few lose > some of the config (including IP addresses and stuff), and a reconfig > from console (takes me about 30 seconds these days) gets them > fully back > up and running (sucks if its a remote city though). > -- > Jeff McAdams Email: jeffm(a)iglou.com > Head Network Administrator Voice: (502) 966-3848 > IgLou Internet Services (800) 436-4456 > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 4

(usr-tc) FW: [datacomm] Secret access to TCs
by Brian Becker 25 Jun '02

25 Jun '02

The newest edition to our IT Department (he's been in Tech Support for 3 years) emailed me this afternoon (full email below). I didn't believe him at first so I telneted to on of our TC boxes and when prompted with "Login:" I typed adm and pressed Enter. HOLY COW! It said "Hiper:" and I had full access. I'm curious as to how many people on this list were vulnerable like us (we have 20 TC boxes throughout Southeast Missouri). Brian Brian Becker President, Poplar Bluff Internet, Inc. P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114 Home of http://semo.net - Southeast Missouri's Online Community http://TotallyFabricated.com Total Scrutinizer - Tech Support Just Got Easier WebGabber - All-html Web Chat Software -----Original Message----- From: Adam Barnhill Sent: Tuesday, July 24, 2001 6:41 PM To: ---interoffice DataComm List--- Subject: [datacomm] Secret access to TCs It has come to my attention that our TCs were vulnerable to anyone's attack. User : adm Would allow access to manage and login to our TCs. The fix was easy. Just 'del user adm' and then 'save all' (thanx Brian) I was actually searching for TC command references, and happened upon ;) a hack list of default and backdoor passwords. The link I originally found a hack article on is http://the.wiretapped.net/security/info/textfiles/k1ine_11.txt and the password list is in that tree somewhere.. Lots of backdoors for other RAS, switches, hubs and other.. Adam Barnhill Systems Technician / IT Dept. Semo.net / Poplar Bluff Internet, Inc. 1(877)686-9114 http://semo.net/ _______________________________________________ datacomm mailing list datacomm(a)lists.semo.net http://lists.semo.net/mailman/listinfo/datacomm - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

(usr-tc) Upgrading a TC
by Rob 19 Jan '02

19 Jan '02

What is the *least* expensive way to upgrade a TC v34 system to v90? Is there one? Feel free to write me offlist at mailto:rjb@worldnetoh.com. Thenks! Rob - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) 3COM
by Lists 05 Sep '01

05 Sep '01

Anyone know if people like Krish are still on this list, or what their e-mail might be? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

10 21

(usr-tc) filtered packet logging
by Mike Andrews 05 Sep '01

05 Sep '01

Sorry to interrupt your regularly scheduled 3Com bashing, but: Anyone had any trouble getting logging of filtered packets to work? I've got packet logging set to "all", size 80, but don't get anything logged under ARC 5.1.99 code. This used to work fine... I know I have to be missing something really really obvious here... but I haven't had to touch my ARCs in so long I can't remember. (Not having to touch them is a good thing, of course... it means they work...) Mike Andrews * mandrews(a)dcr.net * mandrews(a)bit0.com * http://www.bit0.com VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet access for Frankfort, Lexington, Louisville and surrounding counties www.fark.com: If it's not news, it's Fark. (Or something like that.) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) Hiper arc memory
by Steve Johnson 30 Aug '01

30 Aug '01

Hello people =) I have a Hyper Arc for a TC1000 box that only has 8megs of ram, anyone know what kind of memory I need to up this baby to 16megs? -Steve -- Steve Johnson - linuxnut(a)sonic.net Sonic.net, Inc. System Administrator 300 B Street #100 707.522.1000 (Voice) Santa Rosa, CA 95404 707.547.2199 (Fax) http://www.sonic.net/ ------------------------------------------------------------------- Key fingerprint = 9F 9E 50 44 02 74 03 C8 5E 1D 35 15 24 29 0B 97 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Looking for feedback
by Bennie Warren 30 Aug '01

30 Aug '01

I am new to this list. I am preparing to buy a TC1000 chassis with 2 Hiperarc cards, 2 DS3 Ingress cards and 7 DSP cards. My questions are, does anyone else have any configuration even close to this? Is everyone happy with the support they get? How about pitfalls? I was also looking for a much more active list, any inputs on that? Thanks for any input on these items. Bennie - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

Re: (usr-tc) V.92 - anyone there yet?
by Thomas_Goodman＠3com.com 30 Aug '01

30 Aug '01

V.92 was posted for Beta last week (August 23, 2001). I have asked for some official words to submit to this list. Anyone looking to be a part of the Beta would need to fill out the Beta form on Total Service. Min Requirements for V.92 HiPer DSP HiPer ARC w/ 128MB HiPer NMC or Multi-Span New ARC or 56bit VPN ARC 333MHz NMC Hardware Requirements for Multi-Span Blade (96-port card) HiPer ARC w/ 128MB HiPer NMC Note: Max number of ports that these cards will handle is 450 ports. ( you could add 4 multi-spans to a Total Control 1000 with 48 ports of HiPer DSP) The new 333MHz NMC and New ARC will handle 672 ports. More to follow. Tom Goodman RAS Specialist (United States) "Randy Cosby" <dcosby(a)infowest.com> on 08/20/2001 12:34:40 PM Please respond to usr-tc(a)lists.xmission.com Sent by: "Randy Cosby" <dcosby(a)infowest.com> To: usr-tc(a)lists.xmission.com cc: (Thomas Goodman/MW/US/3Com) Subject: (usr-tc) V.92 - anyone there yet? Has anyone installed the V.92 software? Can you give details of performance, problems, how the upgrade is done, etc? I'm also interested in hearing any experiences with the 96 port DSP's. What are the "practical" requirements (power, HARC, etc.) to run those? I've been off the list of a while, so apologies if this has been discussed before. Randy Cosby Developer Shed, Inc./InfoWest, Inc. 435-674-0165 x11 Fax: 435-674-9654 --- http://www.infowest.com http://www.devshed.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

12 16

(usr-tc) i need dsp
by Wilson Diaz 29 Aug '01

29 Aug '01

I am interested in acquiring 5 Hiper DSP E1 and 1Hiper ARC, also thank for information, as time of delivery and mode of payment. Thanks - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) V.92 - anyone there yet?
by Brian Becker 28 Aug '01

28 Aug '01

I agree. Tom is my pick for RAS-SERVER-CUSTOMER-SUPPORT Individual of the Year. See you in a less than two months Tom! ISPConVegas. Let it ride on Red, BABY!!!! Brian Becker President, Poplar Bluff Internet, Inc. P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114 Home of http://semo.net - Southeast Missouri's Online Community http://TotallyFabricated.com Total Scrutinizer - Tech Support Just Got Easier WebGabber - All-html Web Chat Software -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com] On Behalf Of Jeff Mcadams Sent: Tuesday, August 28, 2001 2:54 PM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) V.92 - anyone there yet? Also sprach Seth Jacobs >I don't really disagree with what being said here, but here we finally >have someone from 3Com offering to provide useful information. Tom >isn't the cause of the problem. And I'll strongly "amen" this statement. Tom has been absolutely *wonderful* to deal with over the years (we dealt with him back before USR was purchased by 3Com), and has almost always worked for the good of his customers...even taking battles very strongly up the chain of command within 3Com. Unfortunately, the chain of command for support issues ends at Al Huefner and Irfan Ali. These people are the problem, not Tom. -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0