September 2000 - USR-TC - mailman.xmission.com

(usr-tc) Weird Log files
by G. Owens 28 Sep '00

28 Sep '00

Hey All. Can someone look and tell me what might be going on here. This is a copy of my radius log file from one of my remote pops. It just started this yesterday and we can't seem to stop it. Everything looks right on the ARC and in radius. Have even restarted the arc twice. Also the radius detail file from this box keeps showing this unauthinicated user stop over and over and I am not sure what it means. What is odd is this chassis is in a remote area and we are only using the slots 1 &2 on it with DSP cards. Everything is running the next to newest code. Not the one that reboots the arc all the time...... Thanks for any help in advance. BTW we are running Cistron radius Greg Owens Magnolia Internet Services South Arkansas' Premier Internet Provider http://www.magnolia-net.com Tue Sep 26 23:07:18 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 6 has wrong ID Tue Sep 26 23:07:19 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 3 has wrong ID Tue Sep 26 23:07:20 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 2 has wrong ID Tue Sep 26 23:07:25 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 2 has wrong ID Tue Sep 26 23:07:37 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 4 has wrong ID Tue Sep 26 23:07:38 2000: Info: NAS tc3arc1 restarted (Accounting-On packet seen) Tue Sep 26 23:07:48 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 6 has wrong ID Tue Sep 26 23:07:52 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 3 has wrong ID Tue Sep 26 23:07:55 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 8 has wrong ID Tue Sep 26 23:07:55 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 2 has wrong ID Tue Sep 26 23:08:01 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 3 has wrong ID Tue Sep 26 23:08:01 2000: Auth: Login OK: [marlar] (from nas tc1arc2/S536) Tue Sep 26 23:08:02 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 3 has wrong ID Tue Sep 26 23:08:04 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 3 has wrong ID Tue Sep 26 23:08:05 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 2 has wrong ID Tue Sep 26 23:08:05 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 3 has wrong ID Tue Sep 26 23:08:05 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 2 has wrong ID Tue Sep 26 23:08:06 2000: Error: Accounting: logout: entry for NAS tc3arc1 port 3 has wrong ID Tue Sep 26 23:13:31 2000 User-Name = "unauthenticated" NAS-IP-Address = 63.89.132.3 Acct-Status-Type = Stop Acct-Session-Id = "393591" Acct-Delay-Time = 1440 Service-Type = Framed-User NAS-Port-Type = Async NAS-Port-Id = 7 USR-Interface-Index = 1263 USR-Chassis-Call-Slot = 1 USR-Chassis-Call-Span = 1 USR-Chassis-Call-Channel = 7 USR-Unauthenticated-Time = 40 USR-Modem-Training-Time = 20 Calling-Station-Id = "" Called-Station-Id = "" USR-Modulation-Type = v90Digital USR-Simplified-MNP-Levels = ccittV42 USR-Simplified-V42bis-Usage = ccittV42bis USR-Connect-Speed = 41333_BPS Framed-Protocol = PPP Framed-IP-Address = 0.0.0.0 Acct-Session-Time = 60 Acct-Terminate-Cause = User-Request USR-HARC-Disconnect-Code = User-Req-Drop Acct-Input-Octets = 406 Acct-Output-Octets = 170 Acct-Input-Packets = 17 Acct-Output-Packets = 8 USR-Call-Arrival-Time = 149550318 USR-Call-End-Time = 149550378 Timestamp = 970028011 Request-Authenticator = Verified - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 1

(usr-tc) PRI channels "local out of service"
by Mark Thornton 28 Sep '00

28 Sep '00

After upgrading a hiperdsp to 2.1.9 I have found that two channels on one of my pri's are now stuck in "local out of service" with a service state of 8, whatever that is. I never experienced this type of problem on my pri circuits before and I can't find how to clear the problem. I would greatly appreciate some suggestions on what to do. Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) ARC call termination delay
by Charles Kimes 27 Sep '00

27 Sep '00

Hello to the List: I have just recently noticed this on our ARC/DSP's: For any call terminated on any DSP modem on our ARC controlled chassis, there is a delay before the hardware frees up the DSO. This is true whether the call termination is by user hang-up, idle timeout, session timeout, etc. The telco tell us the DSO stays seized for approximately 2 minutes before it is freed up. I see a delay in the Radius stop packet by about 30 seconds. Any idea or setting I need to look for, or is it the nature of the beast? Many thanks in advance. Charles Kimes, Administrator EagleNet DataCommunications, Inc. St. Marys, GA Administrator(a)eagnet.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) ppp compression
by Dwayne Varey 25 Sep '00

25 Sep '00

A couple of our customers are using bsd boxes to connect to us via ppp. They are complaining that since we've changed to 3com equipment their connections are slower, because the hiper-arc will not negoiate compression control protocol with them. I have looked into this and it seems that the hiper-arc only knows 3 types of compression: Ascend, Stack and Microsoft. Is this true, or is there a hidden command within the hiper-arc to enable more of the ppp rfc compression protocols? ________________________________________________ Dwayne Varey Systems Administrator WestNet - WA's Statewide Internet Provider Phone: 92182600 - Fax: 92182666 http://www.wn.com.au _________________________________________________ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) URL
by Bob Purdon 25 Sep '00

25 Sep '00

Anyone else appreciate this URL? http://www.lansystems.com.au/products/transit_search.asp?Search=True&hiddVen dor=3Com$$$Total$$$Control&method=BPC&Vendor_ID=25 In particular the '3Com$$$Total$$$Control' bit :-) --- Bob Purdon - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Upgrade problems!
by Mark Thornton 24 Sep '00

24 Sep '00

I have just completed an upgrade of my TCH systems to the latest code and have mixed success. In general I am getting much better connection stability, at least according to initial reports on most modems. Several clients who had been experiencing significant difficulty had very stable connections. All was good in the server room, or so I thought. The problem is I have a hiperdsp that is not showing as many connected calls as other units. In the past the call volume was fairly well spread across the modems after a couple of hours ( they start up sequentially, then go to a psuedorandom hunt). The affected hiperdsp is configured identically to others, and the code levels are all the same. When I look at the connection stats the hiperdsp is showing a similar number of connections as other units, but 0 or near 0 total bytes transfered. What am I missing? Where should I look to resolve this? Thanks for your help, Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) "show duplex"?
by Brian 23 Sep '00

23 Sep '00

Does anyone know of a way from the CLI on an ARC to show the duplex setting of an ethernet interface? A way to force it? Brian ----------------------------------------------- Brian Feeny, CCNA, CCDA signal(a)shreve.net Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 5

RE: (usr-tc) in need of expert usr access server consultant
by Brian Becker 22 Sep '00

22 Sep '00

Sorry about that. You later said I see you are in Missouri, so I didn't respond. ;) Poplar Bluff Internet, Inc. 1877 North Westwood Blvd Poplar Bluff MO 63901 Brian. -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Veda Narayan Sent: Friday, September 22, 2000 8:39 AM To: Ray Bolouri (Chicago) Cc: usr-tc(a)xmission.com Subject: Re: (usr-tc) in need of expert usr access server consultant Quoting "Ray Bolouri (Chicago)" <ray.chi(a)uss.net>: Where exactly is your location? I guess I can do this but would need to know where you are located and exactly what you need. If you need to talk you can call me at 847-420-8447 -V > We are looking for a consultant that can setup a total control chassis > for us to do a special functionality > > we need to use this box to dial out using PRI's. > > then we need someone to create some link to our servers and pass out the > ip's to our servers ... then we need it to be able to call another > number and get more ip's and so on .. > > is someone able to help us set this up as such ... need to have this > working in the next few days >>> > > please respond to ray.chi(a)uss.net > > price is not an issue > > ray bolouri > =========== -V ========== - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FS: USR Hiper Equipment and more
by Steve Rivera -www.wrca.net 22 Sep '00

22 Sep '00

WR Communication Associates (WRCA) have the following USR Equipment available: Hiper Bundle $7995 HD Chassis w/ Single 70A power Hiper NMC Hiper ARC 2x Hiper DSP...not E1 compatible Indi's Hiper DSP's $3000...not E1 compatible Hiper ARC Hiper NMC $1000 EdgeServer Card w/ SCSI-2 NIC $1100 (Part# 69-001160-01 R:5 / Part# 69-001410-00 R:2) USR Total Control Bundles - Standard Configuration at your IP address available TC HD Bundles (HD Chassis, single 70A, nmc v90, netserver pri, 12x Quad Digital Modem, Dual T1/PRI) $3750 TC Classic Bundles (2059 Chassis, Dual 45A, nmc v90, netserver pri, 12x Quad Digital Modem, Dual T1/PRI) $3250 TC v32 Terbo Bundle (2059 Chassis, Dual 45A, 15x Quad v32Terbo Modems, all analog w/ nics) $500 QTY- Dual PRI w/ nic $600 6- Dual T1/E1 w/ nic $550 2- Quad Analog/Digital Modem w/ analog nic (dual card) $350 15- Quad Analog w/ analog nic (dual card) $300 10- NMC -Non v90 $150 7- Netserver PRI w/ nic $650 Spare Chassis w/ power 4 Total- High Density TC w/ Integrated Fan Tray (1316-05) w/ single 70A power $500 2 Total- High Density TC w/ Integrated Fan Tray (1316-05) w/ Dual 70A power $750 50- Classic 2059 Total Control w/ Dual 45A $175 1- Classic TC w/ Single 35A $200 1- Classic TC w/ Dual 45A DC power $350 2- Rack32 $300 2- Fan Trays $175 Cables: Null Modems for NMC card $15 Octal Cable (TWH OCT 8) $25 (New in box) Analog Cable Mini SCSI to 4-RS232 $20 Steve Rivera (VP) - w-732.833.2111 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) in need of expert usr access server consultant
by Ray Bolouri (Chicago) 22 Sep '00

22 Sep '00

We are looking for a consultant that can setup a total control chassis for us to do a special functionality we need to use this box to dial out using PRI's. then we need someone to create some link to our servers and pass out the ip's to our servers ... then we need it to be able to call another number and get more ip's and so on .. is someone able to help us set this up as such ... need to have this working in the next few days >>> please respond to ray.chi(a)uss.net price is not an issue ray bolouri

2 1