June 2000 - USR-TC - mailman.xmission.com

(usr-tc) What HiperDSP code works best with Lucent Winmodem?
by peter.olson＠chi.frb.org 17 Jun '00

17 Jun '00

Hello, We are having trouble connecting the new IBM 600x which bundles a Lucent winmode (yuck) to our TC /HiperDSP. On clean phone lines, the authentication terminal window will show a ton of garbage text. I have seen this before when we had X2 modems dialing our V.90 patched DSP's, so I am not surprised. Because we using Microsoft RAS on Egdeserver Pro 2.1.2 drivers (yuck again, I know), we are unable to upgrade the DSP's to the 2.0.x level firmware. The firmware we do have is 1.0.59 on two DSP's and 1.0.43 on two others. The problem seems worse on 1.0.43 DSP's. Does anyone out there know which level is best, or elimates this lucent winmodem problem? The 2.6 Edgeserver drivers which run on SP6a will support the 2.0.x DSP's, but these are still in Beta. I am not going to install 2.5 Edgeserver drivers if I can avoid it. The install is ugly. Thanks In advance, --Peter

2 1

(usr-tc) FS: USR Hiper Cards
by ISP-NetworkHardware.com 16 Jun '00

16 Jun '00

In stock... 2- Hiper NMC $1000 2- Hiper ARC $1900 or BO 1- Hiper DSP, No nic $3000 Also have: 4- USR Viper DSL Modems $500 1- USR Viper DSL (ALC) (Nic/Nac) $600 Lots of USR available...Inquire if needed. Netservers, MP, Total Controls, Parts =+= =+= =+= =+= =+= =+= =+= =+= =+= =+= =+= =+= =+= =+= =+= =+= =+= =+= Steve Rivera (VP) - w-732-833-2111 / c-732-433-5890 24Hr ICQ# 75229638 Email Page 7324335890(a)page.nextel.com (start message with YOUR email address) Worldwide Provider of Network Hardware Since 1981. http://www.wrca.net or http://www.ISP-NetworkHardware.com Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,BayNetworks, Verilink,IBM,Motorola,UDS,Codex,ATT/Paradyne,Hayes,Racal,GDC,Telebit,MultiTech, Sync/Tylink,Wellfleet,,Black Box,Micom & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) USR Total Control MP/16 v.34 modems
by Jamie Orzechowski 16 Jun '00

16 Jun '00

For Sale USR Total Control MP/16 v.34 modems http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=359752097 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Isdn callback with the HARC
by Ernie Pritchard 16 Jun '00

16 Jun '00

Is anyone doing ISDN callback with the harc? I have been trying to get this working with both a cisco 766 and a pipeline 75. I was unable to get the harc to do anything with the dialback configuration setup in the radius server <usr SA ver 6.0.8>, after fooling around with the config in the HARC I was able to get the arc to callback. Im not sure if it is calling the router analog or isdn since its not working. Im running 4.2.32 on the arc and heres an example of the configuration. set modem_group all access two_way add user <username> password <password> type network,callback set user <username> callback_type static phone_number xxxxxxx set network user <username> ip remote_ip_address xxx.xxx.xxx.xxx/xx With this configuration the remote user hits the chassis and then gets disconnected. Ive spoken with support at 3com and the tech said that when the chassis calls back it does not auth with the remote side, this just sounds a little odd. Thanks in Advance, Ernie Pritchard InLine Connections - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) NTP time sync
by Scot Desort 15 Jun '00

15 Jun '00

I am trying to use an NTP server to sync my time on my Hiperarc. I issue the command set ntp primary_server x.x.x.x It accepts the command without error, but it doesn't sync the time. It stays the same as it was before I issued the command, and it doesn't match the time reported by the NTP server. Anything else I need to do to get this to work? -- Scot - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

(usr-tc) What is an LH/SH NIC ?
by Andy 15 Jun '00

15 Jun '00

Until now, our HDM T1 NICs have said under inventory "3COM T1/E1 HDM NIC". The last six we have installed from the 3COM Double-Play program say "3COM T1/E1 LH/SH NIC with Programmable Loopback Relays". I am assuming that LH/SH stands for "long haul / short haul", but what other changes are in the new NICs if any? Of note is that the matching NACs have product codes of 3C4, as opposed to all others installed with a product code of 10Q. All ideas and answers appreciated. Thanks --- Andy Dalrymple XMission Telecom Manager (6/15/00) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) OID for IdleTime?
by Jason Englander 15 Jun '00

15 Jun '00

I'm running the new HiPerARC code (and NMC, DSP) and I've seen "list sessions counters", but I'd sure love to be able to pull that by SNMP... Anyone know, if there is one, what the OID is for it? Numeric preferably. Jason -- Jason Englander <jason(a)interl.net> Systems Administrator - InterLink L.C. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 8

(usr-tc) NETServer 16I/MLPPP/NAT
by Jeremy Shaffner 15 Jun '00

15 Jun '00

Is it possible to use the NETServer 16I as a Multilinking NAT router? We don't use the thing anymore but it might be useful for a customer of ours. We want to bind 4 BRI's to get 256K and also do Network Address Translation for their network. It's running some old version of ComOS. -Jeremy --- Jeremy Shaffner System Administrator JORSM Internet jer(a)jorsm.com http://www.jorsm.com/~jer/pgp.key - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 5

Re: (usr-tc) Stupid Question
by K Mitchell 15 Jun '00

15 Jun '00

At 01:29 PM 6/14/00 -0700, Aaron Nabil wrote: ><rant> > >These off-topic posts really bug me, there are a dozen better mailing >lists and newsgroups. What bugs me even more is people answering off >topic posts BACK TO THE LIST. > ></rant> Sometimes off-topic posting does get out of hand, but small transgressions such as Jeff's certainly aren't as earth-shattering as you're making it out to be. Especially considering the amount of help Jeff's given this list. Why should he be forced to join yet another list just to ask a question that many people here can answer and won't significantly disrupt the list? Personally, I consider most of the lists I'm on to be a community of professionals who share equipment, software, or other interests, not hard-assed "this topic only" question and answer forums. Some are stricter than others, but most allow for some small amount of digression from the stated topic, and that's fine. Then again, maybe you flew off the handle simply cause you're having a bad day. If so, I hope it gets better for you. Personally, this week has been horrid for me, but I haven't quite gotten to the point of snapping a keyboard over my knee yet. -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) Stupid Question
by jeff.binkley＠asacomp.com 14 Jun '00

14 Jun '00

Ok folks, Sorry for the offtopic question but I've gone braindead and need a simple question answered. Can anyone tell me where the list is of root DNS servers for the Internet is ? I used to have it bookmarked but now I can't find it. Thanks in advance for the help. Jeff Binkley ASA Network Computing - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3