June 2000 - USR-TC - mailman.xmission.com

(usr-tc) AO/DI supported?
by Walt Gnann 30 Jun '00

30 Jun '00

I have a customer that wants to have a 24/7 ISDN connection but doesn't want to pay for a dedicated ISDN line to us (gee, I guess all customers want that ;) The ISDN router he's using supports AO/DI where the D-Channel stays active and brings up the B channels automatically for incoming data. Is this something supported by the TC box, telco providing the ISDN, or both? Anything need to be configured/set on the TC to support these connections? Any other considerations in providing this type of service? Thanks, Walt ----------------------------------------------- Walter N. Gnann ISLC, Tech Support http://www.islc.net 843.770.1000 ----------------------------------------------- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Dialout with Quad Digital Modem cards
by Lou Bernstein 29 Jun '00

29 Jun '00

Hey All, I need some help in dialing out of a Quad Digital Modem card using the analog NIC's serial port. When I try this, the modem dials and the remote modem answers the call and starts handshake. After the completion of the handshake, the connection is then dropped within seconds. I tested this to several different server modems as well as a USR sportster. The Quad card software version is 5.10.9 and the Analog NIC is 1.1.0. I have tried this with several different Quad cards with the same results. If I Telnet to the Quad card and dial it connects and works fine. Any help would be appreciated. Lou Bernstein - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Password on a quad modem hub
by Greg Long 29 Jun '00

29 Jun '00

If there is no telnet access at all then how come I can get a login screen when I access the IP for the NETServer Card through a telnet client? It announces itself as a U.S. Robotics Total Control NETServer (tm) and has a login prompt. Thanks, Greg Long Network Administrator Coastlink 801-532-6212 ext 32 greg(a)coastlink.com http://www.coastlink.com > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of David Hamilton > Sent: Wednesday, June 28, 2000 11:57 AM > To: usr-tc(a)lists.xmission.com > Subject: RE: (usr-tc) Password on a quad modem hub > > > The ip pools are handled by the ARC card. You can use the > proprietary 3com > cable to access this card. There might be a password > associated with this > access though. Depends on how the card was setup. The same > thing is true > for the nmc. The only way to access the nmc is through the > cable. There is > no telnet access at all. (We have requested this from 3com > several times). > > If the ARC has a password on the rs232 interface, then as far > as I know, > your screwed. There might be a default account associated > with the arcs > though. If it hasn't been removed (it should have been > because it is a > security risk) then you might try that. I think the username > is adm. I'm > not sure what the password is. > > If these things don't work then you might have to blow out > the config on the > arc and set it up again. Since your administering the system > you should > know all the needed values (ip pools, gateway, etc). > > > > -----Original Message----- > > From: owner-usr-tc(a)lists.xmission.com > > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Greg Long > > Sent: Wednesday, June 28, 2000 1:43 PM > > To: usr-tc(a)lists.xmission.com > > Subject: RE: (usr-tc) Password on a quad modem hub > > > > > > Hi Jorge! > > > > I am trying to access any and all cards. I have the USR > Management suite, > > but it isn't showing me IP pools. So I need to access > whichever card is > > handling the IP pool. I would think it's the NMC card. > You tell me. > > > > > -----Original Message----- > > > From: owner-usr-tc(a)lists.xmission.com > > > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jorge Lozano > > > Sent: Wednesday, June 28, 2000 10:36 AM > > > To: usr-tc(a)lists.xmission.com > > > Subject: Re: (usr-tc) Password on a quad modem hub > > > > > > > > > Hi Greg.. > > > I has worked a lot with quad modems... can you tell me what > > > cards are you > > > trynig to access? netserver.. NMC.. dual? > > > > > > Regards, > > > > > > Jorge Lozano > > > > > > ----- Original Message ----- > > > From: "Greg Long" <greg(a)coastlink.com> > > > To: <usr-tc(a)lists.xmission.com> > > > Sent: Tuesday, June 27, 2000 3:51 PM > > > Subject: (usr-tc) Password on a quad modem hub > > > > > > > > > > I asked this question a few weeks ago. I am hoping someone > > > knows a way > > > into > > > > a USRobotics Total Control Enterprise Hub if you don't have > > > the password > > > for > > > > the telnet access. It is a quad modem hub with dual pri's > > > and an NMC. > > > The > > > > previous admin has forgotten the password, and where he > > > says it was stored > > > > doesn't exist anymore. Someone mentioned there is a way to > > > flush the > > > memory > > > > which would restore the password to factory default but it > > > will probably > > > > flush other settings as well. Seeing as how I can't get > > > into the box to > > > see > > > > how it is setup, I'd really hate to try to figure out what > > > settings would > > > > need to change if I lost some vital info in the flush. > > > I've also heard > > > talk > > > > about hardwiring into the NMC with a crossover cable. Has > > > anyone done > > > this? > > > > Does it bypass the password used with telnetting? > > > > > > > > Thanks, > > > > Greg Long > > > > Network Administrator > > > > Coastlink > > > > 801-532-6212 ext 32 > > > > greg(a)coastlink.com > > > > http://www.coastlink.com > > > > > > > > > > > > - > > > > To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > > > > with "unsubscribe usr-tc" in the body of the message. > > > > For information on digests or retrieving files and old > > > messages send > > > > "help" to the same address. Do not use quotes in your message. > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old > messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Password on a quad modem hub
by Greg Long 28 Jun '00

28 Jun '00

Hi Jorge! I am trying to access any and all cards. I have the USR Management suite, but it isn't showing me IP pools. So I need to access whichever card is handling the IP pool. I would think it's the NMC card. You tell me. > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jorge Lozano > Sent: Wednesday, June 28, 2000 10:36 AM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) Password on a quad modem hub > > > Hi Greg.. > I has worked a lot with quad modems... can you tell me what > cards are you > trynig to access? netserver.. NMC.. dual? > > Regards, > > Jorge Lozano > > ----- Original Message ----- > From: "Greg Long" <greg(a)coastlink.com> > To: <usr-tc(a)lists.xmission.com> > Sent: Tuesday, June 27, 2000 3:51 PM > Subject: (usr-tc) Password on a quad modem hub > > > > I asked this question a few weeks ago. I am hoping someone > knows a way > into > > a USRobotics Total Control Enterprise Hub if you don't have > the password > for > > the telnet access. It is a quad modem hub with dual pri's > and an NMC. > The > > previous admin has forgotten the password, and where he > says it was stored > > doesn't exist anymore. Someone mentioned there is a way to > flush the > memory > > which would restore the password to factory default but it > will probably > > flush other settings as well. Seeing as how I can't get > into the box to > see > > how it is setup, I'd really hate to try to figure out what > settings would > > need to change if I lost some vital info in the flush. > I've also heard > talk > > about hardwiring into the NMC with a crossover cable. Has > anyone done > this? > > Does it bypass the password used with telnetting? > > > > Thanks, > > Greg Long > > Network Administrator > > Coastlink > > 801-532-6212 ext 32 > > greg(a)coastlink.com > > http://www.coastlink.com > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) framed-netmask vs. framed-route
by Mark Thornton 28 Jun '00

28 Jun '00

I have always set up my routed connections on my TCH's by assigning the framed-address and framed-netmask from my radius server (VopRadius) and it has worked great. I am adding a Cisco router to the mix for ADSL aggregation and have been working on getting that configured. In the process of doing so I noted that on a Cisco it appears I should use the framed-route attribute in order to set up the route for the connection (ne mention of using framed-netmask). I know the Hiperarc's will automatically create a route for each connection and distribute it via rip or ospf. Is this how I have avoided needing to deal with the framed-route attribute before now? Is there any benefit to including the framed-route in the radius response to the NAS? Thanks for your assistance, Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 5

(usr-tc) Password on a quad modem hub
by Greg Long 28 Jun '00

28 Jun '00

I asked this question a few weeks ago. I am hoping someone knows a way into a USRobotics Total Control Enterprise Hub if you don't have the password for the telnet access. It is a quad modem hub with dual pri's and an NMC. The previous admin has forgotten the password, and where he says it was stored doesn't exist anymore. Someone mentioned there is a way to flush the memory which would restore the password to factory default but it will probably flush other settings as well. Seeing as how I can't get into the box to see how it is setup, I'd really hate to try to figure out what settings would need to change if I lost some vital info in the flush. I've also heard talk about hardwiring into the NMC with a crossover cable. Has anyone done this? Does it bypass the password used with telnetting? Thanks, Greg Long Network Administrator Coastlink 801-532-6212 ext 32 greg(a)coastlink.com http://www.coastlink.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) SNMP Trap host
by Steve Johnson 27 Jun '00

27 Jun '00

Hello, I've been reading through the CD that came with my hyperDSP cards, and I have not been able to find the answer to my question. We have a linux box that is a SNMP trap host. It traps any errors on equipment via SNMP and logs them on this box, and pages us etc.. How can I setup the totalcontrol gear to use a SNMP log host? Thanks for any help. -Steve - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) "_"command
by Stainforth, Matthew 27 Jun '00

27 Jun '00

if you do a "_reveal commands" it will show you all the hidden troubleshooting commands. Matthew Stainforth || Technical Services Manager || BrunNet Inc. > -----Original Message----- > From: Harry_Wang(a)3com.com [mailto:Harry_Wang@3com.com] > Sent: Tuesday, June 27, 2000 6:41 AM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) "_"command > > > > > Does anyone have a list of command which begin with "_", the > only one I know is > "_authentication". I think all these command should be very > helpful for > troubleshooting. > > Any idea is appreciated. > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) how to remote config HiperDSP through HiperARC
by Stainforth, Matthew 27 Jun '00

27 Jun '00

In the knowledgebase, article ID 1.0.30010810.2189534 goes into great detail about this: Telnet or console connect to the HiPer ARC as a manage user and follow the steps below: 1. Modify each slot for ownership, card_type, and port density via the "set chassis slot" command. 2. Set chassis slot (x-y) console yes <Enter> (where x and y can equal slot range with HiPer DSP cards installed) 3. Verify correct port creation via the "list interface" command. Slot/mod: ports and Slot/CON:1 ports should now be created. 4. add modem_group <name> interface SLOT:X/CON:1 <Enter> (where X = one eligible slot # in line 2) 5. add network service <name> server_type telnetd socket <unused TCP socket number> data service_type=dialout, auth=off, modem_group="name" <Enter> (where "name" = name in line 4) 6. save all <Enter> Note: Only eligible cards with TCS 3.5 software installed (2.0.19 or better) can be console enabled Note: Multiple modem groups and network services can be created to allow console access to all HiPer DSP cards installed and under HiPer ARC ownership as long as a unique TCP port number exists for each service created in line 5 above. Note: Above setup steps are for an unsupported configuration with TCS 3.5 software versions. Use above for a troubleshooting scenario only and disable the network service when not needed as long term usage may cause intermittent problems. TCs 4.0 compatible software fully supports this feature. Matthew Stainforth || Technical Services Manager || BrunNet Inc. > -----Original Message----- > From: Harry_Wang(a)3com.com [mailto:Harry_Wang@3com.com] > Sent: Monday, June 26, 2000 11:08 PM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) how to remote config HiperDSP through HiperARC > > > > > Hi, is it possible to telnet to the HiperARC, then establish a virtual > connection to the HiperDSP, then access the HiperDSP's CLI? > How to do it? > > Thanks in advance > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) how to remote config HiperDSP through HiperARC
by Harry_Wang＠3com.com 27 Jun '00

27 Jun '00

Hi, is it possible to telnet to the HiperARC, then establish a virtual connection to the HiperDSP, then access the HiperDSP's CLI? How to do it? Thanks in advance - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0