May 2000 - USR-TC - mailman.xmission.com

(usr-tc) SBR
by jeff.binkley＠asacomp.com 05 May '00

05 May '00

Ok Folks, I took the plunge and bought the bloated priced SBR Radius software from 3Com. Now where do I start ? This is supposed to be a 3Com version yet I see nothing about the table format for SQL, no .rif file, no VSAs etc.. Can anyone give me a clue where to start ? I've been running the 3Com S&A server and many of these things were included. The SBR manual talks about an IP address pool. is that the same as the address pool in the HiPerArc ? Is there any step-by-step instructions for setting this up with 3Com equipment ? For $3,500 I sure expected more. Jeff Binkley ASA Network Computing - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) SNMP question
by Moira_Bue＠ne.3com.com 04 May '00

04 May '00

The hiperarc.mib file only contains proprietary mib objects plus objects from experimental standard branches. The only file that should be required to compile the hiperarc.mib is the mib-2 from rfc1213 sometimes referred to as the standard mib. This should normally come with an SNMP package. Other standard MIBs supported by the HiperArc and not in hiperarc.mib are rfc's 1573, 1650, 1742, & 1612. You can get these from multiple sites, one being http://www.nic.mil/ftp/rfc Note that some compilers cannot cope with nested MIB files which the hiperarc.mib is and stops when the first END statement is encountered. moi "Mark Thornton" <mark(a)corridor.net> on 05/03/2000 05:25:28 PM Please respond to usr-tc(a)lists.xmission.com Sent by: "Mark Thornton" <mark(a)corridor.net> To: usr-tc(a)lists.xmission.com cc: (Moira Bue/US/3Com) Subject: Re: (usr-tc) SNMP question I got to looking in the hiperarc.mib file and it is importing files that I don't have and don't know where to get. These are the mibs that came with all my 3Com install, but I guess that explains it ;) How am I or anyone else supposed to know where to get all the mibs that may be required for a particular client? Isn't this making it awfully hard for something that is name Simple... Mark Thornton San Marcos Internet, Inc. 512-393-5300 . - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) SNMP question
by Mark Thornton 04 May '00

04 May '00

Where would I find a list of the SNMP queries the HyperArc will respond to? I am looking to retrieve a list of current online users. Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 23

(usr-tc) outdated mibs, what did I expect?
by Mark Thornton 04 May '00

04 May '00

I have come to the conclusion that the mib's delivered by 3Com are based on RFC's that are so out of date as to not be in general circulation anymore. Additionally, if you go to 3Com's ftp site and try to find any mib's that support the TCH, they aren't there. Says a lot about the company we all bought into. Maybe my dsl implementation will take this headache away from me because it sure is a pain to keep dealing with this crap everyday. Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) FS: USR Hiper DSP, ARC, NMC, TC
by Steve Rivera 03 May '00

03 May '00

In stock, Guaranteed working. 1- USR Hiper DSP $3500 1- USR Hiper ARC $2000 1- USR Hiper NMC $950 (unused) 2- USR VIPER DSL Modems $550 Still have about 7- v90 Total Control Bundles, Complete 4- Types, 35A, 45A, 45A(DC), 70A High Density Chassis 70A Power and Classis Chassis 45A power Asking $4000.00 Worldwide Provider of Network Hardware Since 1981. Steve Rivera - v-732-833-2111 / 732-433-5890 24Hr Email Page 7324335890(a)page.nextel.com (start message with YOUR email address) WAN ACCESS SPECIALIST--- http://www.wrca.net or http://www.ISP-NetworkHardware.com Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,BayNetworks, Verilink,IBM,Motorola,UDS,Codex,ATT/Paradyne,Hayes,Racal,GDC,Telebit,MultiTech, Sync/Tylink,Wellfleet,,Black Box,Micom & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Euro ISDN and DSS1
by Nicolas St-Pierre 03 May '00

03 May '00

Hi Folks, I'm wondering if any of you know if the Net5/CTR4 (Euro ISDN) switch setting for a E1 would work on a German DSS1 E1 circuit. From all the docs that I can find, DSS1 is defined as being the same Euro ISDN protocol, but rename. so I figure this should work. Any comments? Thanks, Nick -- Nicolas St-Pierre Systems Engineer Internet Access Solutions Ltd. Tel (416) 621-7255 Fax (416) 621-3509 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) TCH board swap
by Steve Phelan 01 May '00

01 May '00

Is there anyone out there that would like to trade 12 Digital only Modem cards for the Total Control Hub part #69-000790-12 for 6 Analog/Digital cards part #69-000793-00. Please let me know. Thanks. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Static Routing Question
by Mike Storjohann 01 May '00

01 May '00

The mask on the Hiper ARC is /24. On with the dispute! I am learning a lot from the discussion so keep it up! Thanks. Mike Storjohann -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Colin Wantling Sent: Tuesday, April 25, 2000 2:00 PM To: 'usr-tc(a)lists.xmission.com' Subject: RE: (usr-tc) Static Routing Question Jeff, We need Mike to confirm what the mask is on the HARC interface. This will get us past this techie discussion an onto helping the guy. His attached network may well be mask /29 /28 ... etc. This would give the error message he gets as it would then include the address of the HARC itself. Not a question of Classful/Classless, more a question of inconsistency and getting caught. Regards, Colin Also sprach Colin Wantling >Maybe yes, maybe no. No "maybe" to it...as long as the next-hop of the route isn't within the route itself, there's no problem. 10.1.1.12 isn't within 10.1.1.9/32, so there's no problem. Even if it were, its *possible* to even get that to work...but there's not a "standard" way of doing it. If you put the /32 in there, its gonna be the most specific route, so it will (should) be referenced before any shorter length match. At that point, the only questions are, "Is the next-hop reachable?" There's another route that is valid for the next-hop address (locally connected), so yes. "Is there a higher precedence route of the same mask length (ie, /32)?" Possible, but unlikely. >The route Mike is adding has a /32 mask, he doesn't say what the mask >is on the HARC ethernet interface already. Doesn't matter. As long as the next-hop for the /32 route is reachable, it should be accepted. Even if the next-hop isn't reachable, the route should probably be accepted...just not entered into the active routing table. >By giving it an address from another subnet, you can beat >the rules. s/rules/bugs/ :) -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 13