May 2000 - USR-TC - mailman.xmission.com

(usr-tc) Higher port density with TotalControl
by r.helfenberger＠comlight.ch 25 May '00

25 May '00

Hi Does anybody knows anything about new TotalControl equipment with a higher port density than the 14 PRI per chassis? Maybe even a product where a Central Office connection (SDM-1, 155 MBit/s) ca be brought directely into the chassis? Thanks Ralph --------------------------------------------------------------------------------------------------------- Comlight AG Industriestrasse 17 CH-3178 BÃ¶singen Tel: +41 31 740 40 40 Fax: +41 31 740 40 90 e-Mail: r.helfenberger(a)comlight.ch URL: http://www.comlight.ch - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) ISDN GW SLOT
by Denis Newkirk 24 May '00

24 May '00

I remember this being on the list, but figured it was a quick enough question to ask again: We still have the Quad Modems in one of our chassis with the HiperArc upgrade. We're having trouble with ISDN callers. Is the ISDN GW SLOT still supposed to be set to SLOT 16 (HiperARC)? of to itself? Thanks in advance!! - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) RE: netservers needed
by albert 24 May '00

24 May '00

sorry 'bout my last note in public to steve,.. the old click first and check later fault... albert. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) WTB: USR Quad Analog/Digital Modems
by ISP-NetworkHardware.com 24 May '00

24 May '00

With ANALOG nics would be nice, but not necessasary. Looking for upto 30 Quad Analog/Digital modem cards. WTS: 4- MP16 v34 10- Netserver 16 v34 1- Netserver 8 v34 1- Netserver 8I 1- Netserver 16I 1- Hiper ARC 1- Hiper ARC Qty- NMC (non v90) 10- USR Total Controls Bundles 5- HD Chassis w/ integrated fan tray (single 70A power) Qty- Spare Modems 10- Spare 70A power 1- Spare 130 power Worldwide Provider of Network Hardware Since 1981. Steve Rivera - v-732-833-2111 / 732-433-5890 24Hr Email Page 7324335890(a)page.nextel.com (start message with YOUR email address) WAN ACCESS SPECIALIST--- URL's http://www.wrca.net or http://www.ISP-NetworkHardware.com Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,BayNetworks, Verilink,IBM,Motorola,UDS,Codex,ATT/Paradyne,Hayes,Racal,GDC,Telebit,MultiTech, Sync/Tylink,Wellfleet,,Black Box,Micom & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Attributes
by Greg Owens 24 May '00

24 May '00

Can someone please look at this and tell me what might be going on. I receive one of these a about every time a userlogs in then about 30 of them all at once. This started when we started using Cistron radius. Thanks in advance for any explanation. 88.12 $"administrator17233" Administrative Start Tue May 23 19:01:04 2000: Accounting: 78/22 'administrator' from 63.67.88.12 $"a dministrator17233" Administrative Start - OK -- total 0, holding 0 Tue May 23 19:01:04 2000: child_end: DNS update finished Tue May 23 19:01:04 2000: generate26: USR attribute 38998 unknown Tue May 23 19:01:04 2000: gen_valpairs: non-encapsulated vendor specific attribu te Vendor-Specific=vUSR-00009856b4aef548b19a7a92dd4774f0b312bf93 Tue May 23 19:01:04 2000: generate26: USR attribute 39000 unknown Tue May 23 19:01:04 2000: gen_valpairs: non-encapsulated vendor specific attribu te Vendor-Specific=vUSR-0000985800000000 Tue May 23 19:01:04 2000: generate26: USR attribute 39001 unknown Tue May 23 19:01:04 2000: gen_valpairs: non-encapsulated vendor specific attribu te Vendor-Specific=vUSR-0000985900000000 Tue May 23 19:01:04 2000: generate26: USR attribute 39051 unknown Tue May 23 19:01:04 2000: gen_valpairs: non-encapsulated vendor specific attribu te Vendor-Specific=vUSR-0000988b00000000 Tue May 23 19:01:04 2000: Received-Accounting: 78/23 'administrator' from 63.67. 88.12 $"administrator17233" Administrative Stop/User-Request Tue May 23 19:01:04 2000: Accounting: 78/23 'administrator' from 63.67.88.12 $"a dministrator17233" Administrative Stop/User-Request - OK -- total 0, holding Greg Owens Magnolia Internet Services http://www.magnolia-net.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) ISPCon
by Jeff Mcadams 22 May '00

22 May '00

Any attendees to ISPCon in Orlando? I'm guessing quite a few of us will be down there. Do we want to coordinate a time to gather and chat? I'll be making it there sometime Tues. afternoon and will be leaving Thurs. morning (we have a Public Service Commission hearing against Bellsouth on Fri...have to be back for that) -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) NMC break in needed...
by Stephen Amadei 21 May '00

21 May '00

Hi guys... I have a NMC we purchased a long time ago that we need to put into service ASAP. We just discovered one of our NMCs was not X2 enabled, and this card is X2 enabled... but I don't have the SNMP write password. The firmware is 4.3.4, and on bootup at the RS232 console all I can get is "PASSWORD:"... if I use the 'public' read password, I can get in, but not change anything. I tried using pin 5 to boot to the default settings, but it still asks for a password! I am afraid to use the CMOS clear jumper, as I fear it will erase the feature enable status of the X2 enablement. Would this clear the X2 enable out? Thanx in advance. ----Steve Stephen Amadei Dandy.net CTO Atlantic City, NJ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Archive?
by Charles Sprickman 20 May '00

20 May '00

Hello, Anyone know if there's a searchable archive? I just went over to where I used to go, usr-tc.datasys.net and it seems to be gone... I was looking for some old David Bolen SNMP posts... thanks, Charles | Charles Sprickman | Internet Channel | INCH System Administration Team | (212)243-5200 | spork(a)inch.com | access(a)inch.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

RE: (usr-tc) Multi-Linked calls across HUBS
by Blake Fithen 19 May '00

19 May '00

Make sure you are pointing the hubs to a NTP server, that you have NTP enabled, and that both have the same time on them. blake > -----Original Message----- > From: pferraro(a)wna-linknet.com [SMTP:pferraro@wna-linknet.com] > Sent: Thursday, May 18, 2000 5:08 PM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Multi-Linked calls across HUBS > > > I would like hear the particular configurations that anyone is > using to handle multiple ISDN dialup across several TC Hubs. We have MPIP > configured, but it appears that when a call goes to one hub and the second > ISDN comes in on a different hub, the call gets dropped?? Do we have > something mis-configured here. > > On hub acts as the MPIP server and is listed as a client as well as the > other hubs. The remaining hubs have the MPIP server listed in their > config. > > Any help/comments appreciated. > > ========================================================================== > ==== > Phillip Ferraro WorldNet Access, Inc > pferraro(a)wna-linknet.com Onslow County's PREMIER InterNet Service > Voice (910) 346-0835 824 Gumbranch Square, Suite Q > FAX (910) 455-1933 Jacksonville, Nc 28540-6269 > ========================================================================== > ==== > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Multi-Linked calls across HUBS
by pferraro＠wna-linknet.com 19 May '00

19 May '00

I would like hear the particular configurations that anyone is using to handle multiple ISDN dialup across several TC Hubs. We have MPIP configured, but it appears that when a call goes to one hub and the second ISDN comes in on a different hub, the call gets dropped?? Do we have something mis-configured here. On hub acts as the MPIP server and is listed as a client as well as the other hubs. The remaining hubs have the MPIP server listed in their config. Any help/comments appreciated. ============================================================================== Phillip Ferraro WorldNet Access, Inc pferraro(a)wna-linknet.com Onslow County's PREMIER InterNet Service Voice (910) 346-0835 824 Gumbranch Square, Suite Q FAX (910) 455-1933 Jacksonville, Nc 28540-6269 ============================================================================== - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0