April 2000 - USR-TC - mailman.xmission.com

(usr-tc) Suggested Firmware
by Lamar Townsend 17 Apr '00

17 Apr '00

I was wondering what the suggested firmware version are for the Hiper Chassis right now. I'm currently running 4.1.56-7 on the HiperARCs and 2.0.81 on the HiperDSPs. Is the hung modem pair problem fixed in these releases? Lamar Townsend lamar(a)shuttle.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Modems ?
by jeff.binkley＠asacomp.com 17 Apr '00

17 Apr '00

Folks, Now that 3Com is getting out of the modem business, what is everyone going to recommend for customers to use ? Jeff Binkley ASA Network Computing - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) WTB: Edgeserver
by Nicolas St-Pierre 17 Apr '00

17 Apr '00

Hi Folks, I'm looking for a new/used EdgeServer (not EdgeServer PRO). This is the 486 DX4/100Mhz 2 slot wide server. Should come with both SCSI-2 and Ethernet NIC. Please reply off the list. Thanks, Nick -- Nicolas St-Pierre Systems Engineer Internet Access Solutions Ltd. Tel (416) 621-7255 Fax (416) 621-3509 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) USR attribute 39049 unknown
by Richard Roy 15 Apr '00

15 Apr '00

Hi, I getting tired of the warning messages that exist in my radius logfile. We are using Merit AAA. This is an example that came from my radius logfile (accounting) for every session: Thu Apr 13 09:08:23 2000: generate26: USR attribute 39049 unknown Thu Apr 13 09:08:23 2000: gen_valpairs: non-encapsulated vendor specific attribute Vendor-Specific=vUSR-0000988900000000 Note: 39049 is 0x9889. I have an open ticket with 3Com. Here the info I have so far: - USR-ATTRIBUTE Nas-Supports-Tags 0x9889 integer - This attribute is indeed used with L2TP and is used for multiple LNS/grouping Any help will be appreciated. Thanks. Richard Roy Technical Associate Aliant www.aliant.ca - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) DMS-10 and PRI Config on DSPs
by Mike Tindor 14 Apr '00

14 Apr '00

Anybody had problems with configuring a DSP for PRI going to a DMS-10 switch? Can anybody offer me their DSP settings (PRI to a DMS-10) ? Our equipment all checks out (even swapped out a complete chassis/nmc/arc/dsp) -- All channels show in service..D-channel OK. We have the switch type set to NI2 per the telco's suggestion but have tried DMS-100 as well. They have struggled and I have struggled and am pretty much at wits end on what could possibly be misconfigured on my end. We are getting slow-busies (normal busy signals) when dialing into this POP. Any suggestions/help/ Thanks in advance. Mike Tindor - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Radius attribute listing
by Mark Thornton 11 Apr '00

11 Apr '00

Where can I get a complete listing of the radius attributes sent by the HyperArc? I have looked in the docs and it doesn't define a number of them that are getting sent to my radius server (65 through 68, and a few others). Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Bad modems
by Steve Cobb 11 Apr '00

11 Apr '00

Hi all, I recently had a problem that I want to know if someone knows how to correct ad how to prevent. I have 2 HiperDSP cards in a TC chassis. The slot 2 card accepts calls on all 23 ports successfully and then rolls to slot 1 beginning at port 23. I had a problem that when the next dialup hit ports 22 or 21 they got a high pitch and didn't handshake. I disabled modems 22 and 21 and then my dialup got busy signals. Apparently the chassis wouldn't let customers past the two disabled modems. I have just rebooted slot 1 and everything seems to be working now so maybe that was the fix. But it was about 4 hours before I knew that this was happening. Is there a way to monitor for modems giving a "Dialup Invalid" response or not accepting connections? Thanks, Steve Cobb -- Steve Cobb Computer Geeks stevec(a)computer-geeks.com www.computer-geeks.com ***************************** Want faster internet service? www.geeksnet.com -- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 4

(usr-tc) Syslog Entries
by Charles Sprickman 06 Apr '00

06 Apr '00

Hello All, While troubleshooting some radius problems (look out for multihomed radius servers!), I came across some odd entries in the syslog output of the HARC. If anyone knows what these mean, I'd love to know: Apr 6 17:05:52 TC-4-HARC.oldslip.inch.com At 21:05:52, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, slot:3/mod:2 TAPI OPEN failed Apr 6 17:05:52 TC-4-HARC.oldslip.inch.com At 21:05:52, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, slot:3/mod:2 TAPI_OPEN failed, retrying (the slot mentioned is a Quad) Apr 6 17:05:52 TC-4-HARC.oldslip.inch.com At 21:05:52, Facility "SBUS", Level "UNUSUAL":: pbpci_error_processing: BTO_ACK (??) Apr 6 17:04:58 TC-5-HARC.oldslip.inch.com At 21:04:58, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, Unknown SBUS Message 9 ../../src/al_sbus.c 541 (not comforting - unknown sbus message??) Apr 6 17:04:48 TC-4-HARC.oldslip.inch.com At 21:04:48, Facility "IP Routing Process", Level "UNUSUAL":: OSPF CFM Save Failed, cfm_status=(bad status), detailed_status=ES_SUCCESS (don't have ospf enabled) Anyhow, if you have any info, let me know. I'm starting to think the first three messages have to do with my "quads auto-busy on 4.2.32 but not any 4.1.x harc code) problems... Is it a fair guess to say that the 3Com folks have left this list? I can't remember the last time I saw Krish or Mike post here... They used to be good at helping with stuff like this... Thanks, Charles | Charles Sprickman | Internet Channel | INCH System Administration Team | (212)243-5200 | spork(a)inch.com | access(a)inch.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Delay on modem answer?
by Aaron Nabil 06 Apr '00

06 Apr '00

S50 in 1/50th seconds, default is 100, 255 will double the delay from 2 to 5 seconds. -- Aaron Nabil - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

Re: (usr-tc) Reply message
by pferraro＠wna-linknet.com 06 Apr '00

06 Apr '00

Looking for (2) Hiper DSP cards. Need to fill out for 2 new T-1s just ordered. Contact me off-list. Thanks! ============================================================================== Phillip Ferraro WorldNet Access, Inc pferraro(a)wna-linknet.com Onslow County's PREMIER InterNet Service Voice (910) 346-0835 824 Gumbranch Square, Suite Q FAX (910) 455-1933 Jacksonville, Nc 28540-6269 ============================================================================== - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0