January 2000 - USR-TC - mailman.xmission.com

Re: (usr-tc) static to dynamic
by D A Substanley 27 Jan '00

27 Jan '00

Interesting... I was able to do it the first time: Test Two>>li chassIS Slot Owner Description Ports Type Console 1 YES --EMPTY-- 0 STATIC NO 2 YES --EMPTY-- 0 STATIC NO 3 YES --EMPTY-- 0 STATIC NO 4 YES --EMPTY-- 0 STATIC NO 5 YES --EMPTY-- 0 STATIC NO 6 YES --EMPTY-- 0 STATIC NO 7 YES --EMPTY-- 0 STATIC NO 8 YES --EMPTY-- 0 STATIC NO 9 YES --EMPTY-- 0 STATIC NO 10 YES --EMPTY-- 0 STATIC NO 11 YES --EMPTY-- 0 STATIC NO 12 YES --EMPTY-- 0 STATIC NO 13 NO --EMPTY-- 0 STATIC NO 14 NO --EMPTY-- 0 STATIC NO 15 NO --EMPTY-- 0 STATIC NO 16 NO --EMPTY-- 0 STATIC NO Test Two>>enable nmc dynAMIC_SLOT_ASSIGNMENT Test Two>>li chassis Slot Owner Description Ports Type Console 1 YES 24 Channel High Density Modem 23 DYNAMIC YES 2 YES 24 Channel High Density Modem 23 DYNAMIC YES 3 YES 24 Channel High Density Modem 23 DYNAMIC YES 4 YES 24 Channel High Density Modem 23 DYNAMIC YES 5 YES 24 Channel High Density Modem 23 DYNAMIC YES 6 YES 24 Channel High Density Modem 23 DYNAMIC YES 7 YES 24 Channel High Density Modem 23 DYNAMIC YES 8 YES 24 Channel High Density Modem 23 DYNAMIC YES 9 YES 24 Channel High Density Modem 23 DYNAMIC YES 10 YES 24 Channel High Density Modem 23 DYNAMIC YES 11 YES 24 Channel High Density Modem 23 DYNAMIC YES 12 YES 24 Channel High Density Modem 23 DYNAMIC YES 13 NO --EMPTY-- 0 STATIC NO 14 NO --EMPTY-- 0 STATIC NO 15 NO HiPer Access Router NAC 0 DYNAMIC NO 16 NO HiPer Access Router NAC 0 DYNAMIC NO But I can't do it again. das David Swearingin (david(a)carolnet.com) spake: > You wrote: > > > From: D A Substanley <das(a)gol.com> > > To: usr-tc(a)lists.xmission.com > > Date: Thu, 27 Jan 2000 13:32:38 +0900 > > Subject: Re: (usr-tc) static to dynamic > > > > > > Whoops, I meant enable nmc dynamic_slot_assignment > > > I tried that also, but a li chas still shows slot 2-13 as type STATIC > > David > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. -- ______________________________________________ Alex Substanley Exodus Communications K.K. Engineering Department Das Man TEL: 81-3-5334-1700 Systems Engineer FAX: 81-3-5334-1711 ______________________________________________ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) static to dynamic
by david＠carolnet.com 27 Jan '00

27 Jan '00

You wrote: > From: D A Substanley <das(a)gol.com> > To: usr-tc(a)lists.xmission.com > Date: Thu, 27 Jan 2000 13:32:38 +0900 > Subject: Re: (usr-tc) static to dynamic > > > Whoops, I meant enable nmc dynamic_slot_assignment > I tried that also, but a li chas still shows slot 2-13 as type STATIC David - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) static to dynamic
by D A Substanley 27 Jan '00

27 Jan '00

Whoops, I meant enable nmc dynamic_slot_assignment Sorry about that. das David Swearingin (david(a)carolnet.com) spake: > You wrote: > > > From: D A Substanley <das(a)gol.com> > > To: usr-tc(a)lists.xmission.com > > Date: Thu, 27 Jan 2000 12:33:12 +0900 > > Subject: Re: (usr-tc) static to dynamic > > > > > > Enable nmc chassis awareness > > > > das > > Didn't work for me. > > David > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. -- ______________________________________________ Alex Substanley Exodus Communications K.K. Engineering Department Das Man TEL: 81-3-5334-1700 Systems Engineer FAX: 81-3-5334-1711 ______________________________________________ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) static to dynamic
by david＠carolnet.com 27 Jan '00

27 Jan '00

You wrote: > From: D A Substanley <das(a)gol.com> > To: usr-tc(a)lists.xmission.com > Date: Thu, 27 Jan 2000 12:33:12 +0900 > Subject: Re: (usr-tc) static to dynamic > > > Enable nmc chassis awareness > > das Didn't work for me. David - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) static to dynamic
by david＠carolnet.com 27 Jan '00

27 Jan '00

How do I "set chassis slot x type" from static to dynamic? David __________________________________________________ David Swearingin (david(a)carolnet.com) CARROLLTON INTERNET SERVICE (www.carolnet.com) First Financial Group, Inc. 11 N. Folger, Carrollton, MO 64633 660-542-3002 Fax 660-542-3003 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) 2.0.51 improvements
by Paul Farber 27 Jan '00

27 Jan '00

hello all... after the discussion of the 2.0.51 performance.. I'm gonna give it a shot. the release notes (we all read the release notes... don't we?) 3Com has 'resolved' MR2346: improved connections with Rockwell HCF modems with roundtrip delays of 30-40ms. Also v42 detection has been improved...... well there's 2 bits of good new. Paul Farber Farber Technology farber(a)admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Ascend to 3com
by Scott Boggs 27 Jan '00

27 Jan '00

I use the TotCtrl chassis and Ascend Maxes (6000&4000) I have found that the Maxes are much more reliable for some user modem types. It is my Failsafe if the user cant connect to the 3com. Scott Boggs AccessUnited ISP > -----Original Message----- > From: Brian Burgmeier [SMTP:brianb@ntwrld.com] > Sent: Wednesday, January 26, 2000 6:07 PM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Ascend to 3com > > We are in the process of merging two ISPs. Our ISP runs on > the 3Com Hiper Arch Chassis the other ISP runs on Ascend. > Since we both use ELI for our Channelized T-1s we are > considering porting their dial in number over to our 3Com chassis > at our location.. > What problems should we anticipate moving customers from > an ASCEND unit to 3com? Both are using the "V90 standard." > protocol. Would we be better off using > their ASCEND equipment? Any feedback is appreciated. > > > Thanks -Brian > > << File: Card for Brian Burgmeier >> - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

Re: (usr-tc) DSPCode 2.0.51
by Mark Lemmert 27 Jan '00

27 Jan '00

At 05:30 PM 1/25/00 -0600, Brian wrote: >I have seen more connection success rate with 2.0.51. I use to get 94-98% >connection success overall for all calls to a chassis for a 24 hour >period. > >I now see more like 96-98% average. How do you get those sorts of statistics? I have been having a very large number of complains from people saying the can't connect. I am running 2.0.81. Thanks. -MGL >On Tue, 25 Jan 2000, Charles Sprickman wrote: > > > On Tue, 25 Jan 2000, Brian wrote: > > > > > 2.0.51 is good for all DSP's > > > > How's it compare to 2.0.81? Better, worse, indifferent? > > > > Charles > > > > > On Tue, 25 Jan 2000, Cheryl Johnson wrote: > > > > > > > Is this code only recommended for hardware revisions .54 and .55 only? > > > > I have .49 and was thinking of moving to the 2.0.51 from the 2.0.60 > > > > since I do not see too many improvements. And is this compatible with > > > > NMC 6.1.17 and ARC 4.1.22? It seems to be getting more difficult to > > > > keep these things straight. > > > > > > > > -Cheryl Johnson > > > > SEI Data Network Services, Inc. > > > > A Division of SEI Communications > > > > > > > > > > ----------------------------------------------------- > > > Brian Feeny (BF304) signal(a)shreve.net > > > 318-222-2638 x 109 http://www.shreve.net/~signal > > > Network Administrator ShreveNet Inc. (ASN 11881) > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > >----------------------------------------------------- >Brian Feeny (BF304) signal(a)shreve.net >318-222-2638 x 109 http://www.shreve.net/~signal >Network Administrator ShreveNet Inc. (ASN 11881) > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. Mark Lemmert CTO AthEnet Data Exchange 920-954-9799 mark.lemmert(a)athenet.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Global Access list on arc's
by Brian 27 Jan '00

27 Jan '00

Can you make a global access list on the ARC's, basically like an access list applied to its eth interface, so that it applies to all users? I don't want to enable it via radius, I just want to do this via CLI (its an access list to prevent stuff to our core). Brian ----------------------------------------------------- Brian Feeny (BF304) signal(a)shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

Re: (usr-tc) Quad ana/dig modem not taking calls (another case of)
by Ray Whelan 26 Jan '00

26 Jan '00

Dan, A = active and C= configured this means that if you reset the cared the C becomes active, If both are the same this should not be an issue if you save the configuration. 30 second after reset is normal for this card to become active after reset. Ray Whelan Dan Borlovan <danb(a)dnttm.ro> on 26/01/2000 13:28:54 Please respond to usr-tc(a)lists.xmission.com Sent by: Dan Borlovan <danb(a)dnttm.ro> To: Ray Whelan <Ray_Whelan(a)eur.3com.com> cc: usr-tc(a)lists.xmission.com (Ray Whelan/IE/3Com) Subject: Re: (usr-tc) Quad ana/dig modem not taking calls (another case of) On Wed, 26 Jan 2000, Ray Whelan wrote: > The problem is when a Digital calls comes form your telco, we get the first > digit and we respond to it with a A-1, The telco should then should send the > next digit but > the NAS times out ( normal condition) as no other digits or recieved, the NAS > then sends a digit complete , but the telco send a clear forward . You can call me stupid. Yes the e1/cas got the first digit, sent the A-1, but the telco didn't recognize the A-1 so it never sent the other digits. The problem: the e1/cas had the 'companding' setting on 'use modem country code'. Well, the digital modems are for europe (A-law) and the analog/digitals are for US (u-law). I wonder how an A-law encoded signal sounds after decoded with u-law. And viceversa. The 'companding' is set to A-law now, and all the modems are taking calls. Now an unrelated question: the e1/cas shows 'project id' as a=R2 q=Q412, but I can set only one value for 'project id'. As a result, each time I reset the e1/cas card, I have to do it twice, because after first reset the a= and c= values are incorrect (both Q421 or R2), and after the seconde reset it takes about 30s to detect the correct values and start taking calls. Is there anything that can be done? Dan -- Dan Borlovan <danb(a)dnttm.ro> System Administrator, Network Operation Center Dynamic Network Technologies - Timisoara, Romania Telefon: +40-56-204967 FAX: +40-56-220201 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0