November 1999 - USR-TC - mailman.xmission.com

(usr-tc) CT1 on dual-T1 card
by Stainforth, Matthew 20 Nov '99

20 Nov '99

I'm having a bit of trouble getting a channelized T1 circuit to work over a dual T1 card. I know the circuit works okay because I had it up on a DSP card a few minutes ago and have been making test calls for a month no problem. Having eyeballed the settings from card to card and transferring them as best I could, I'm still having a problem. The call appears to go through and sieze a modem but the modem LED turns red and all that is heard is a high pitched tone. I plugged all this into 3KB and came up with problem ID:1.0.29434755.2181891: Please follow these steps: 1. Call telephone company and do two-way tone tests on the Quad Modems with them. Within Total Control Manager, open the menu Fault then select Remote Testing for "Send a Tone" and 'Receive a Tone" 2. Upon tone tests see which path is not generating transponder tones at a particular db level and once identified, telco will fix that path and modems will negotiate calls fine thereafter. Note: Possible sources include NULL ANI/DNIS fields or improper DSO call seizure with missing off-hook condition (E&M Type 2 trunks). However, the same circuit worked fine for a month over a HiPerDSP. It's entirely possible that I'm missing something obvious since I have always used PRI for quads up to this point. Is there something obvious that I'm missing? I'm using (and these options work fine on the DSP): ESF, B8ZS, No Dial In Address, Wink Start, eAndMTypeII trunk, and DTMF tones. Any suggestions would be greatly appreciated Matthew Stainforth || Technical Services Manager || BrunNet Inc. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Dropped connections for 2nd login with same login ID . MPPP weird thing?
by Scott Trautman 19 Nov '99

19 Nov '99

Nah, I should have said but didn't, that no, there isn't any static IP on this. >From the dialup pool of IP's. SMT - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Dropped connections for 2nd login with same login ID . MPPP weird thing?
by Scott Trautman 19 Nov '99

19 Nov '99

I wanted the EASY answer!!! :^) Okay, will get that mon info, but not until Mon. Yep, 4.2.32 on all chassis. SMT - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) pri loopback
by eric＠dol.net 19 Nov '99

19 Nov '99

Can the duel pri cards be set so that the phone company can loop the card (csu) while it is in operation. Whenever we have our pris tested we cget the comment that we can't loop our csu so there must be something wrong with our equipment when in fact the problem is a telco related problem we are trying to resolve. I have to manually go and put the card in loopback in the configure / actions commands settings so the telco can run to the equipment. thanks eric - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Using TCM through firewall
by Jose de Leon 19 Nov '99

19 Nov '99

What ports do I need to open in my firewall to use Total Control Manager? Thanks, Jose - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 7

Re: (usr-tc) Adding Hiper DSP to Netserver/Quad modem chassis
by Tim Brown 19 Nov '99

19 Nov '99

Thanks to those who have replied so far. Wayne, please clarify the ROM upgrade. Usually a ROM upgrade is required to upgrade firmware to a certain version or rev level. Since you specified 8k, are you refering to an upgrade to Flash RAM instead? I am not even sure if the NMC uses Flash RAM, but the "8k" caused me to guess that you meant Flash RAM instead of ROM. Also, did you experience the decrease in throughput or Quake user complaints that Andrew did? Thanks again. Tim -----Original Message----- From: Wayne Barber <barberw(a)tidewater.net> To: usr-tc(a)lists.xmission.com <usr-tc(a)lists.xmission.com> Date: Thursday, November 18, 1999 11:55 AM Subject: RE: (usr-tc) Adding Hiper DSP to Netserver/Quad modem chassis >Hi, >The other person is correct. The NMC will need a ROM upgrade to 8k and the >software will also need upgrading. On the Compatibility matrix, you should >upgrade to at least TCS 3.3, which will have the NMC at 5.5.5, the Netserver >at 3.8.1 and the DSP card at 1.2.37. You didn't state whether your T1 card >is 186 or 386, but I noticed that there is no latest code for the 186. If >you use TCM, don't forget to upgrade that first to 5.5.1 (or better). > >We ran for a short while with a hiperDSP in a netserver rack. It seemed to >be just fine, but we had purchased the upgrade bundle that included the >hiperARC and within a few days had swapped that in. > >You should be able to do up to 96 modems in your rack with the netserver. >Remember that the power supplies will no longer be redundant once you put in >the DSP. > >Wayne Barber >Coastal Telco Services > >> -----Original Message----- >> From: owner-usr-tc(a)lists.xmission.com >> [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Tim Brown >> Sent: Thursday, November 18, 1999 11:02 AM >> To: usr-tc(a)lists.xmission.com >> Subject: (usr-tc) Adding Hiper DSP to Netserver/Quad modem chassis >> >> >> I have an older TC chassis with T1/PRI, Quad modem, Netserver PRI, and NMC >> cards, and two 45amp power supplies. The Netserver and NMC have 16mb ram >> added (total of 20 I think, the cards have 4mb on board if I remember). I >> saw a posting to the list indicating that a Hiper DSP card could >> be added to >> the chassis as long as the modem density was set properly in the Netserver >> card for the slot that the Hiper DSP card occupies. Does anyone know if >> certain versions of software are required in the Netserver and/or NMC to >> work with the Hiper DSP? I haven't upgraded the software in those >> cards for >> quite some time since the chassis works great (except for the occasional >> modems that won't answer--requires a chassis reset every 60 days >> or so) and >> my customers get great x2 and v.90 connects (I use the box myself and >> usually get a 49333 with the occasional 52000 and 53333--amazing >> considering >> we're using channelized T1's with AMI/D4 on this box). If anyone >> is running >> a Hiper DSP in a TC chassis similar to mine, I would appreciate >> feedback on >> what software versions you're running and how the box has performed after >> adding the Hiper DSP. Thanks in advance for any assistance and/or info. >> Tim Brown >> SumterNet, Inc. >> >> >> - >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. >> > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

Re: (usr-tc) Resetting password on an NMC card
by Steve Valiunas 18 Nov '99

18 Nov '99

Yes David DenHollander <david(a)adoptable.com> on 11/18/99 02:14:31 PM Please respond to usr-tc(a)lists.xmission.com Sent by: David DenHollander <david(a)adoptable.com> To: usr-tc(a)lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: Re: (usr-tc) Resetting password on an NMC card Are you sure this will not disable X.2? At 01:17 PM 11/18/99 -0600, you wrote: > > >The passwords are your SNMP community strings. If you flip dipswitch 6 on, you >will bypass the password screen. You can then disable the password prompt or >change the strings. > Steve > > > > >David DenHollander <david(a)adoptable.com> on 11/18/99 12:48:12 PM > >Please respond to usr-tc(a)lists.xmission.com > >Sent by: David DenHollander <david(a)adoptable.com> > > >To: usr-tc(a)lists.xmission.com >cc: (Steve Valiunas/MW/US/3Com) >Subject: (usr-tc) Resetting password on an NMC card > > > > >I have a NMC card that is X2 enabled. The card also has a password, which I >do not know. Is there away to reset the card without losing the X2 enabling? > >thanks >David > > > > >David DenHollander > >(403)254-1100 Main >(403)201-2815 Fax > > > > > > > > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > David DenHollander (403)254-1100 Main (403)201-2815 Fax - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Netserver PRI
by Stainforth, Matthew 18 Nov '99

18 Nov '99

set assigned <initial IP address of pool> set limit <size of pool> save all (and most importantly...) reboot -----Original Message----- From: Cheryl Johnson [mailto:netadmin@seidata.com] Sent: Thursday, November 18, 1999 5:11 PM To: usr-tc(a)lists.xmission.com Subject: (usr-tc) Netserver PRI I am setting up a Netserver PRI card and Quad (analog) modems. I set the modem pool up but it seems to be using ip's out of the ip pool. What is the command on the Netserver card to set the ip pool? I may not have used the correct command set. Â -C - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Netserver PRI
by Cheryl Johnson 18 Nov '99

18 Nov '99

I am setting up a Netserver PRI card and Quad (analog) modems. I set the modem pool up but it seems to be using ip's out of the ip pool. What is the command on the Netserver card to set the ip pool? I may not have used the correct command set. -C

1 0

Re: (usr-tc) Resetting password on an NMC card
by Steve Valiunas 18 Nov '99

18 Nov '99

The passwords are your SNMP community strings. If you flip dipswitch 6 on, you will bypass the password screen. You can then disable the password prompt or change the strings. Steve David DenHollander <david(a)adoptable.com> on 11/18/99 12:48:12 PM Please respond to usr-tc(a)lists.xmission.com Sent by: David DenHollander <david(a)adoptable.com> To: usr-tc(a)lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) Resetting password on an NMC card I have a NMC card that is X2 enabled. The card also has a password, which I do not know. Is there away to reset the card without losing the X2 enabling? thanks David David DenHollander (403)254-1100 Main (403)201-2815 Fax - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1