On Tue, 9 Nov 1999, Jeff Mcadams wrote:
> Thus spake Robert von Bismarck
> >Get a couple Squid boxes and a layer-3 switch,
> ^^^^^^^^^^^^^^
> translation: "router" :)
>
I meant layer 4 switch !
> >The cisco cache engine is a good solution for a large corporate intranet,
> >it's next to useless for an ISP as it will do only 2000 concurrent
> >connections simultaneously.
>
> I just can't see purchasing something like that when you've got squid
> available. Though, having not implemented either solution I can't say
> this with authority, it just seems like squid is quite capable (more
> capable?) of handing this than a commercial solution would be.
>
> I also like the possibility of clustering or making a hierarchy out of
> the squid boxes...that seems pretty slick. :)
> --
> Jeff McAdams Email: jeffm(a)iglou.com
> Head Network Administrator Voice: (502) 966-3848
> IgLou Internet Services (800) 436-4456
>
> -
> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
> with "unsubscribe usr-tc" in the body of the message.
> For information on digests or retrieving files and old messages send
> "help" to the same address. Do not use quotes in your message.
>
-----------------------------------------------------
Brian Feeny (BF304) signal(a)shreve.net
318-222-2638 x 109 http://www.shreve.net/~signal
Network Administrator ShreveNet Inc. (ASN 11881)
-
To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
with "unsubscribe usr-tc" in the body of the message.
For information on digests or retrieving files and old messages send
"help" to the same address. Do not use quotes in your message.
The software revisions in the two cards were not the same. There are items
in the new card that have no corresponding setting in the older card, so
there is an SNMP error that the OID does not exist. In those cases, the
whole list does not get updated. For example, the modem has a Transmit Level
under the Line Interface Options under 2.0.60 but not under 1.2.60. When
copying from 1.2.60, the Line Interface Options do not get updated. I did
those by hand.
Thanks for all the input so far,
Wayne Barber
Coastal Telco Services
> -----Original Message-----
> From: owner-usr-tc(a)lists.xmission.com
> [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of K Mitchell
> Sent: Friday, November 12, 1999 6:51 PM
> To: usr-tc(a)lists.xmission.com
> Subject: RE: (usr-tc) New chassis install
>
>
> At 03:33 PM 11/12/99 -0500, Wayne Barber wrote:
> >Thanks,
> >I just tried this and had no change. I should add that I used TCM to copy
> >the settings from a working DSP in another hub. The software revs are
> >slightly different, but most of the info copied over ok.
>
> Most of it copied over ok? Was there something specific that didn't?
>
>
> --
> Kirk Mitchell-General Manager mitch(a)keyconn.net
> Keystone Connect Unlock Your World
> Altoona, PA 814-941-5000 http://www.keyconn.net
>
>
> -
> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
> with "unsubscribe usr-tc" in the body of the message.
> For information on digests or retrieving files and old messages send
> "help" to the same address. Do not use quotes in your message.
>
-
To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
with "unsubscribe usr-tc" in the body of the message.
For information on digests or retrieving files and old messages send
"help" to the same address. Do not use quotes in your message.
Guys,
I'm trying to set up E1 PRI RAS in here with Hiper System.
Can you guys recommend good software matrix for me? I use 4.1.59 for
HiperARC but looks like not stable enough for production network. If
possible, I'd like to use software which based on TCS 3.5. Because I don't
need OSPF or stuff like that to take a risk.
HiperARC
HiperDSP E1/PRI
HiperNMC
Any input?
Thanks in advance.
Lee.
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
-
To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
with "unsubscribe usr-tc" in the body of the message.
For information on digests or retrieving files and old messages send
"help" to the same address. Do not use quotes in your message.
