October 1999 - USR-TC - mailman.xmission.com

RE: (usr-tc) Performance monitoring/ANI information from Dual T1 card running PRI
by Scott Trautman 19 Oct '99

19 Oct '99

Beauty. That's what I thought. Now to confirm I have the right radius attributes in there. -----Original Message----- From: dciresi(a)defunct.ae.usr.com [mailto:dciresi@defunct.ae.usr.com] Sent: Tuesday, October 19, 1999 12:18 PM To: Scott Trautman Cc: 'usr-tc(a)lists.xmission.com' Subject: Re: (usr-tc) Performance monitoring/ANI information from Dual T1 card running PRI Scott, If you are terminating ISDN on the Munich daughterboard, you will not be able to view the Called/Calling-Number-info. This is specifically located on the modem. This information should be in the Netserver RADIUS requests, however. Dominic On Tue, 19 Oct 1999, Scott Trautman wrote: > I'm guessing the answer is "can't get there from here" unless it's modem > calls. > I'm interested in the calling number info that is coming in on the PRI. > > I can view a modem call and get the calling number info, but not on ISDN, > which > is all I'm running. Trying performance monitor on the T1, nothing there > like it. > > Using a Netserver with das Munich daughterboard und dual T1, works really > quite well. Might be a mighty cheap way for some of you to do ISDN only > traffic for dedicated customers. You can do the Dual PRI& Netserver in > same chassis as with a HiperARC & DSP's. Neat. > > I'm also wondering whether I can get via radius accounting that "calling > number" from a Netserver/or is it NMC??? > > Anybody be able to shed some light? > > SMT > > Scott M. Trautman 800-482-4638 > Global Dialog Internet 608-240-4638,4637fax > 2810 Crossroads, STE LL2 scott(a)gdinet.com > Madison WI 53718 http://www.gdinet.com > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Performance monitoring/ANI information from Dual T1 card running PRI
by Scott Trautman 19 Oct '99

19 Oct '99

I'm guessing the answer is "can't get there from here" unless it's modem calls. I'm interested in the calling number info that is coming in on the PRI. I can view a modem call and get the calling number info, but not on ISDN, which is all I'm running. Trying performance monitor on the T1, nothing there like it. Using a Netserver with das Munich daughterboard und dual T1, works really quite well. Might be a mighty cheap way for some of you to do ISDN only traffic for dedicated customers. You can do the Dual PRI& Netserver in same chassis as with a HiperARC & DSP's. Neat. I'm also wondering whether I can get via radius accounting that "calling number" from a Netserver/or is it NMC??? Anybody be able to shed some light? SMT Scott M. Trautman 800-482-4638 Global Dialog Internet 608-240-4638,4637fax 2810 Crossroads, STE LL2 scott(a)gdinet.com Madison WI 53718 http://www.gdinet.com

2 1

(usr-tc) Hung Modems/What to do?
by Marshall Morgan 19 Oct '99

19 Oct '99

Much of the discussion over the past few days has been quite interesting, but what are people doing with the modem+neighbor modem hung problem in the field? We have many of our new DSPs doing this (2-4 DSPs running CT1 and PRI). Also, we have had DSPs on PRI's hang the d-channel or T1 carrier as well (maybe telco here). Running 2.0.81 HDM and 4.1.59-6 ARC code. BTW: Anyone at 3Com going to take us up on that offer for a meeting? Gordon Biersch (http://www.gordonbiersch.com/) was fun, but what about a serious discussion first! Thank you, Marshall Morgan President Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) HiPer Config Guide
by Dataheart 18 Oct '99

18 Oct '99

Just a quicky. does anyone know of any online config guides for the DSP cards. they are E1 NIC's. Thanks, Aaron - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) badmodems.pl
by Stainforth, Matthew 18 Oct '99

18 Oct '99

if your time is correct on the server where the report is generated it's pretty trivial. $time = localtime(time()); print "Report generated $time\n"; yields Report generated Fri Oct 15 04:38:28 1999 > -----Original Message----- > From: K Mitchell [SMTP:mitch@keyconn.net] > Sent: Saturday, October 16, 1999 12:20 AM > To: usr-tc(a)lists.xmission.com > Subject: RE: (usr-tc) badmodems.pl > > At 11:42 PM 10/15/99 -0300, you wrote: > > > >You could rewrite part of the script to make it output HTML directly to > >STDOUT so that it generates your stats real-time. I'm doing this with > some > >other SNMP scripts I wrote but, depending on the stats, you might be > sitting > >there a while waiting for it to do something. If you want to run it > >periodically you might want to consider using WINAT to schedule it if > you're > >on NT. > > One other thing, I'd like to include the date/time the report was > generated. Is there an OID for getting this from the ARC or NMC? > > -- > Kirk Mitchell-General Manager mitch(a)keyconn.net > Keystone Connect Unlock Your World > Altoona, PA 814-941-5000 http://www.keyconn.net > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

(usr-tc) some help needed
by Brian 18 Oct '99

18 Oct '99

I am in a bit of a situation and need some advice/help on how to "fix it". Basically bellsouth, in a very rural town, installed us 3 CT1 circuits. We ordered these all provisioned the same. They had to reprovision them multiple times, because they couldn't get it right, and its really costed me alot of time, and our customers alot of patience in that particular pop. So, finally Bell is saying the provisioned right. I am not able to complete call on it however, the calls arrive, but don't complete. Smells of a bad start type to me........I can plug the other 2 CT1's into that same equipment and it works fine (3 hdm's all configured the same, 3 CT1's all configured the same). So basically, on Tuesday, I am having to go onsite with a bunch of engineers, which I know is just going to be one big pissing contest. I have assembled a list of information off the chassis/dsp's, to help me battle this, but I don't know if perhaps I am leaving out something critical that can really be of help. Some of the info I got is: Trunk Settings This shows all 3 CT1's configured identical Timeslot Service Configuration This shows all 3 CT1's channels inService Performance Monitor Physical States - All 3 psF1Operational Line Status - All 3 "1" No Idle Modem Available - All 3 "0" Transmit / Receive Carrier Levels The good channels all show about 1820 transmit and 1820 receive. The third CT1 shows 0 for transmit and 0 for receive Incoming Connecions established vs. terminated Good spans show about 900 for these Third span shows very messed up numbers for these Signal to Noise Ratios Third span shows signal to noise at like 65536!!! Whats the best data to throw at the telco? And as if this isn't enough. The 3 CT1's are in a hunt, first available. This town takes very few calls. But I can watch literally 5-10 calls per second come in on CT1 #3, yet 1 and 2 have idle channels! The amount of calls arriving on span3 HAVE to be a call simulator that the telco has hooked up to the line to test it........something they are doing without my permission, and something they are denying, I think they left it turned on and forgot to turn it off. At the end of the day, spans1 and 2 saw like maybe 500 calls, and span3 has seen like 50,000 calls. This is in an area with about 300 customers........sigh. I have no way of even dialing into span3, its only got 1 DID into the hunt. Which like I said is first available. ----------------------------------------------------- Brian Feeny (BF304) signal(a)shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) How far are we from...
by vanhalen＠coredcs.com 18 Oct '99

18 Oct '99

Hello- A while back I posted a message(and have seen other posts) in regards to getting bytes transferred & sent per session via the command line interface on a hiperarc/hiperdsp based box. At that time the code for that feature was in an engineering release(?). I'm curious if that code has been released and I missed it(which could very easily happen) or if that is forthcoming and roughly when it would be available? Thanks! - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Eicon Diva TA to DSP
by Kent Tambling 18 Oct '99

18 Oct '99

I know this was raised once before with no answer, but does anyone know of any problems/solution using this adapter? One client gets maximum 3KB/s download (on both channels) and it inevitably hangs (stops moving data) after 1 to 20 minutes. BellSouth recommends these and I think it may be because they have success with then and the rest of us may not(USR crowd) Thanks, Kent Tambling kent(a)acceleration.net System Administrator www.acceleration.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Radius Effects...
by Scot Desort 18 Oct '99

18 Oct '99

While we're all talking about Radius, we currently send the following attributes to our TC for our default user: Framed-IPAddress = 255.255.255.254 Framed-Routing = None We recently signed up with Ziplink for wholesale nationwide dialup. A lot of their equipment is Bay. They claim that when the Bay receives these attributes, it chokes. It allows the connection, and the modem connect speed is fine, but throughput is horrible. Over 50% of the packets drop, and after a few minutes, the call will drop. They say we need to remove these attributes from the Radius profile we send. Huh? Bay doesn't like these 2 *basic* attributes? They also said they don't like 'Port-limit=1', but I am NOT removing that one. For this one, they state that they have trouble with the Bay doing 128K ISDN anyway, so removing the attribute will have no effect. Double "huh?" My question is, what effect will this have on our local dialup customers connecting to our TC? Will the TC happily work without receiving those 2 attributes? We are currently not running RIP on the TC (we are small, so everything is static) - but we plan on enabling RIPv2 shortly. Will the TC start sending RIP updates to the dialup clients without the Framed-Routing=none attribute set? They also have some Max's out there, but a good portion of it's Bay. I don't know of any way to have my Radius server send a different profile to their proxy, so it has to be the same one I send to my TC. Sorry for what might seem a stupid question - not real up to speed on RIP and exactly what the framed-routing attribute does. -Scot NJAccess - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 4

Re: (usr-tc) 3com V90 Problems
by Allen Marsalis 18 Oct '99

18 Oct '99

At 04:22 PM 10/17/99 -0500, Brian wrote: >I would imagine, actually hope, that 3com's tests labs, have done many >tests against their own stuff and against competitors. I would think they >would not make a policy of releasing such data, unless of course 3com was >best in every case, which I doubt it was, but certainly coudln't have done >too poor. Conversely, I would imagine that ascend's test labs have done tests against their competitors.. And that they wouldn't release such data unless they were best.. IOW, you would think that one manufacturer (at least) would come out of the closet with data proving that they were the best. :) I've always been disappointed that so few tests have been done to rate 56k.. The only test I remember comparing x2 to kflex was the boardwatch fiasco.. nothing totally unbiased and largely scientific seems to be done on a regular basis.. What is keeping us from polling both chassis every hour and logging the actual connect speeds into an SQL database? If the scripts (telnet, snmp, whatever) could be written, they could be passed around by ISP's giving some pretty good 'real world' data to support or refute our perceptions of modem performance. Has anyone out there ever done anything like this? Allen > >Brian > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1