October 1999 - USR-TC - mailman.xmission.com

(usr-tc) Latest E1/R2 code for HiPer DSP
by Daniel Mpolokoso 08 Oct '99

08 Oct '99

Hi, I'd be grateful for information on how I can get access to the latest E1/R2 code for the HiPer DSP. Our nearest support is South Africa and they don't have access to the code for some reason. The latest information I have indicates that E1/R2 code is not yet in general release and as such, will probably not appear on the Total Service site for quite a while. I'm really getting desperate to get our HiPer DSPs interfacing to our telco's exchange (E1 R2 signaling, HDB3, Multiframing with no CRC) and look forward to any form of assistance anyone can provide to help us get our system online. Thanks, Daniel. ------------------------------------------------------------------------ Daniel Mpolokoso - Technical Manager, Email: daniel(a)zamnet.zm ZAMNET Communication Systems Limited, Phone: +260 - 1 - 772516 P.O. Box 38299, Lusaka, Zambia. Fax: +260 - 1 - 224775 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Filter
by Robert von Bismarck 08 Oct '99

08 Oct '99

Or use qpopper with the Bulletin mode activated. See http://www.eudora.com/free/servers.html -- Robert von Bismarck Network Systems Engineer Petrel Communications SA / SPAN Tel : +41 22 304 47 47 Fax : +41 22 300 48 43 WWW : http://www.petrel.ch e-mail : rvb(a)petrel.ch > -----Original Message----- > From: Charles Sprickman [SMTP:spork@inch.com] > Sent: jeudi, 7. octobre 1999 19:43 > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) Filter > > Do the same as with the web server, but run a dummy popper that always > responds with "-ERR Pay your bill, fool!". See > http://www.tdx.co.uk/software/ for an example dummy popper. A bit of > hacking and you're on your way... > > Charles > > On Thu, 7 Oct 1999 eric(a)dol.net wrote: > > > This assumes the customer uses a web browser. What happens in this case > then the > > customer only uses email? > > > > > > > > At 01:48 AM 9/8/99 +1000, you wrote: > > >One thing you could do would be to write a script that changes that > particular > > >users FRAMED-IP-ADDRESS radius attribute to something on say a 192.168 > network > > >and using the route-map feature in your cisco(if you have a cisco) for > forward > > >all traffic on that 192.168 network to A web site say > > >http://outoftime.yourdomain.com/ and with that same access list you > could deny > > >all other traffic. > > > > > >NOTE: I have never implemented this, but I like the idea of informing > the user > > >that they are out of time so I will do it within the coming weeks. > > > > > >Thanks, > > >Aaron > > > > > >Jamie Orzechowski wrote: > > > > > >> I am trying to create an ARC filter that will make ALL HTTP traffic > redirect > > >> to one specific site. > > >> > > >> We would like have filter so that any late payment people will still > be able > > >> to login but they will be redirected to a website informing them that > their > > >> bill is due. > > >> > > >> would also like the filter to not allow any traffic other than HTTP. > > >> > > >> any ideas? > > >> > > >> - > > >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > >> with "unsubscribe usr-tc" in the body of the message. > > >> For information on digests or retrieving files and old messages send > > >> "help" to the same address. Do not use quotes in your message. > > > > > > > > >- > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old messages send > > > "help" to the same address. Do not use quotes in your message. > > >Delaware Online!.........The SMART Choice! > > With 56K V.90 & X2 & Flex Modems > > Phone : 302-762-0375 > > Fax: 302-762-3462 > > Failure is NOT an option... > > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) DSL
by Mike Wilker 08 Oct '99

08 Oct '99

Does anyone still run the Affinity DSL on their TotalControls? I am trying to set one up that we've had for a year now, but I can't get the command line to come up on the card. Does it use the same console cable as the HiperArcs and NMCs, and is there another way to configure it, say through the Viper DSL? Thanks. Mike Wilker Operations Manager Local Link, Inc. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

Re: (usr-tc) USR vs Ascend (3com vs Lucent?) -Reply
by Campbell Simpson 08 Oct '99

08 Oct '99

We have our HiPer DSP cards set to -11dB. There has been plenty of discussion about what the levels should be set at and we are currently lowering the transmit levels on a number of our NAS by 1dB each week to see what effect it has on call stability and connect speeds. I'll let you know what our findings are when we have finished the trials - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Filter
by Jamie Orzechowski 08 Oct '99

08 Oct '99

I am trying to create an ARC filter that will make ALL HTTP traffic redirect to one specific site. We would like have filter so that any late payment people will still be able to login but they will be redirected to a website informing them that their bill is due. would also like the filter to not allow any traffic other than HTTP. any ideas? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

Re: (usr-tc) Filter
by Startup Suppliers Ltd. 08 Oct '99

08 Oct '99

I am interested in this too, please forward response to me. Okeyo At 10:00 AM 10/6/99 -0400, you wrote: >I am trying to create an ARC filter that will make ALL HTTP traffic redirect >to one specific site. > >We would like have filter so that any late payment people will still be able >to login but they will be redirected to a website informing them that their >bill is due. > >would also like the filter to not allow any traffic other than HTTP. > >any ideas? > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

Re: (usr-tc) Filter
by eric＠dol.net 07 Oct '99

07 Oct '99

Would the customer be able to get their mail with a dns lookup of the mail.xx.net mail server from an inside ip address or would they get connected then get a "could not locate the server" errror message. We currently send notes to the customer telling them their account will become inactive on a certain date but I like the idea of throwing up a web page saying your did not renew your account please call the office. eric At 02:42 AM 10/8/99 +1000, you wrote: >A valid point. > >in the script I suggested to change the FRAMED-IP-ADDRESS radius attribute simply >add a sendmail routein to send them an E-mail. > >or if you use NT this should be able to be done with the CDONTS vbscript feature. > >Thanks, >Aaron > >eric(a)dol.net wrote: > >> This assumes the customer uses a web browser. What happens in this case then the >> customer only uses email? >> >> At 01:48 AM 9/8/99 +1000, you wrote: >> >One thing you could do would be to write a script that changes that particular >> >users FRAMED-IP-ADDRESS radius attribute to something on say a 192.168 network >> >and using the route-map feature in your cisco(if you have a cisco) for forward >> >all traffic on that 192.168 network to A web site say >> >http://outoftime.yourdomain.com/ and with that same access list you could deny >> >all other traffic. >> > >> >NOTE: I have never implemented this, but I like the idea of informing the user >> >that they are out of time so I will do it within the coming weeks. >> > >> >Thanks, >> >Aaron >> > >> >Jamie Orzechowski wrote: >> > >> >> I am trying to create an ARC filter that will make ALL HTTP traffic redirect >> >> to one specific site. >> >> >> >> We would like have filter so that any late payment people will still be able >> >> to login but they will be redirected to a website informing them that their >> >> bill is due. >> >> >> >> would also like the filter to not allow any traffic other than HTTP. >> >> >> >> any ideas? >> >> >> >> - >> >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> >> with "unsubscribe usr-tc" in the body of the message. >> >> For information on digests or retrieving files and old messages send >> >> "help" to the same address. Do not use quotes in your message. >> > >> > >> >- >> > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> > with "unsubscribe usr-tc" in the body of the message. >> > For information on digests or retrieving files and old messages send >> > "help" to the same address. Do not use quotes in your message. >> >Delaware Online!.........The SMART Choice! >> With 56K V.90 & X2 & Flex Modems >> Phone : 302-762-0375 >> Fax: 302-762-3462 >> Failure is NOT an option... >> >> - >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. >Delaware Online!.........The SMART Choice! With 56K V.90 & X2 & Flex Modems Phone : 302-762-0375 Fax: 302-762-3462 Failure is NOT an option... - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) NMC Command Reference
by Steve Valiunas 07 Oct '99

07 Oct '99

Don't know if it's a Good reason, but it looks like the plain-old-reason is that the links are incomplete for some of the docs. We'll try to get this straightened out... For what it's worth- the "Total Control Hubs : TCS3.5" product family should be complete. Sorry about that. Steve Brian <signal(a)shreve.net> on 10/07/99 01:30:56 PM Please respond to usr-tc(a)lists.xmission.com Sent by: Brian <signal(a)shreve.net> To: usr-tc(a)lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: Re: (usr-tc) NMC Command Reference On Thu, 7 Oct 1999, Steve Valiunas wrote: > > > If you search on "hiper" and "management" you'll get hits on the HiperNMC > Parameter reference, HiperNMC Getting Started Guide, HiperNMC Product > Reference and a couple others. Hmm, any reason why going to "document library" and clicking on "Network Managment Card" doesn't turn these up? Thanks for the help, Brian > > > > > Brian <signal(a)shreve.net> on 10/07/99 09:57:03 AM > > Please respond to usr-tc(a)lists.xmission.com > > Sent by: Brian <signal(a)shreve.net> > > > To: USRobotics TC Mailing List <usr-tc(a)xmission.com> > cc: (Steve Valiunas/MW/US/3Com) > Subject: (usr-tc) NMC Command Reference > > > > > > > I am trying to get a handle on the Command Reference to use with HiperNMC > 6.x. I don't see a HiperNMC 6.x command reference on TotalService. What > I do see is: > > NMC version 5.0 parameter reference > HiPer NMC Parameter Reference Errata Sheet > HiPer NMC SNMP and MIB Reference Errata Sheet V6.0, 6.1, 6.2 > > > That being said, are those the 3 files I should look at, or does a > "HiperNMC version 6.0 parameter reference" exist somewhere? I am assuming > you just go about using the 5.0 parameter reference with a few changes > documented in the erattas........... > > Brian > > ----------------------------------------------------- > Brian Feeny (BF304) signal(a)shreve.net > 318-222-2638 x 109 http://www.shreve.net/~signal > Network Administrator ShreveNet Inc. (ASN 11881) > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > ----------------------------------------------------- Brian Feeny (BF304) signal(a)shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) NMC Command Reference
by Steve Valiunas 07 Oct '99

07 Oct '99

If you search on "hiper" and "management" you'll get hits on the HiperNMC Parameter reference, HiperNMC Getting Started Guide, HiperNMC Product Reference and a couple others. Brian <signal(a)shreve.net> on 10/07/99 09:57:03 AM Please respond to usr-tc(a)lists.xmission.com Sent by: Brian <signal(a)shreve.net> To: USRobotics TC Mailing List <usr-tc(a)xmission.com> cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) NMC Command Reference I am trying to get a handle on the Command Reference to use with HiperNMC 6.x. I don't see a HiperNMC 6.x command reference on TotalService. What I do see is: NMC version 5.0 parameter reference HiPer NMC Parameter Reference Errata Sheet HiPer NMC SNMP and MIB Reference Errata Sheet V6.0, 6.1, 6.2 That being said, are those the 3 files I should look at, or does a "HiperNMC version 6.0 parameter reference" exist somewhere? I am assuming you just go about using the 5.0 parameter reference with a few changes documented in the erattas........... Brian ----------------------------------------------------- Brian Feeny (BF304) signal(a)shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

Re: (usr-tc) Filter
by eric＠dol.net 07 Oct '99

07 Oct '99

This assumes the customer uses a web browser. What happens in this case then the customer only uses email? At 01:48 AM 9/8/99 +1000, you wrote: >One thing you could do would be to write a script that changes that particular >users FRAMED-IP-ADDRESS radius attribute to something on say a 192.168 network >and using the route-map feature in your cisco(if you have a cisco) for forward >all traffic on that 192.168 network to A web site say >http://outoftime.yourdomain.com/ and with that same access list you could deny >all other traffic. > >NOTE: I have never implemented this, but I like the idea of informing the user >that they are out of time so I will do it within the coming weeks. > >Thanks, >Aaron > >Jamie Orzechowski wrote: > >> I am trying to create an ARC filter that will make ALL HTTP traffic redirect >> to one specific site. >> >> We would like have filter so that any late payment people will still be able >> to login but they will be redirected to a website informing them that their >> bill is due. >> >> would also like the filter to not allow any traffic other than HTTP. >> >> any ideas? >> >> - >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. >Delaware Online!.........The SMART Choice! With 56K V.90 & X2 & Flex Modems Phone : 302-762-0375 Fax: 302-762-3462 Failure is NOT an option... - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3