Hi folks- sorry to clutter up the forum with this, but I wanted to tell Wayne that I found the 17 lines yesterday, and the email I sent to him personally in which I notified him of this was returned today; address must have changed. At any rate, it's in the mail tomorrow. Jerry ----- Original Message ----- From: wayne yeargain To: For and about Montgomery Sailboats Sent: Wednesday, April 09, 2003 7:31 PM Subject: Re: M_Boats: M17 line drawings Hi Jerry Yes send me copies of the 15, I'd like to try my hand at developing some nice drawings. Let me know of any expense you incur & I'll be glad to re-imburse you. Wayne Yeargain 7334 King Manvel, Tx. 77578 ----- Original Message ----- From: Jerry Montgomery To: montgomery_boats@mailman.xmission.com Sent: Monday, April 07, 2003 11:53 PM Subject: Re: M_Boats: M17 line drawings Wayne- I can't find the 17 line drawings, but I have found the 15. It's possible that the 17 lines don't exist anymore (except on the boats, of course). Do you want a copy of the 15 to play around with? There are no deck or interior drawings of the 15, other than the sailplan; I lofted the hull but did the rest with a tape measure and a hand grenade. If this sounds good to you, send me your address. Jerry ----- Original Message ----- From: wayne yeargain To: montgomery_boats@mailman.xmission.com Sent: Monday, February 10, 2003 8:24 PM Subject: Re: M_Boats: M17 line drawings Sounds good, I'll look for them in the mail. Wayne ----- Original Message ----- From: Jerry Montgomery To: montgomery_boats@mailman.xmission.com Sent: Sunday, February 09, 2003 6:50 PM Subject: Re: M_Boats: M17 line drawings Hi Wayne- My drawings are all old pen & ink drawings. Assusming you can w0ork with these, I'll copy the line drawing and send it off to you. Give me a little time; I'm busyer than a one-armed paper hanger. Jerry ----- Original Message ----- From: wayne yeargain To: montgomery_boats@mailman.xmission.com Sent: Wednesday, February 05, 2003 6:58 PM Subject: M_Boats: M17 line drawings Jerry If you are still intrested I'd like to try to intregate your cad drawings with my system and complete any areas necessary to get a complete plan & elevation drawings. My boat is a '76 M17 and I can take measurements for items that are not on your drawings. Let me know what you think Contact me off line at saltydog@ev1.net Wayne ---------------------------------------------------------------------------- _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats ------------------------------------------------------------------------------ _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats