Hi folks- sorry to clutter up the forum with this, but I wanted to tell Wayne that I found the 17 lines yesterday, and the email I sent to him personally in which I notified him of this was returned today; address must have changed.
 
At any rate, it's in the mail tomorrow.
 
Jerry
----- Original Message -----
From: wayne yeargain
To: For and about Montgomery Sailboats
Sent: Wednesday, April 09, 2003 7:31 PM
Subject: Re: M_Boats: M17 line drawings

Hi Jerry
Yes send me copies of the 15, I'd like to try my hand at developing some nice drawings.
Let me know of any expense you incur & I'll be glad to re-imburse you.
 
Wayne Yeargain
7334 King
Manvel, Tx.
77578
----- Original Message -----
From: Jerry Montgomery
To: montgomery_boats@mailman.xmission.com
Sent: Monday, April 07, 2003 11:53 PM
Subject: Re: M_Boats: M17 line drawings

Wayne- I can't find the 17 line drawings, but I have found the 15.  It's possible that the 17 lines don't exist anymore (except on the boats, of course).  Do you want a copy of the 15 to play around with?  There are no deck or interior drawings of the 15, other than the sailplan; I lofted the hull but did the rest with a tape measure and a hand grenade.
 
If this sounds good to you, send me your address.
 
Jerry
----- Original Message -----
From: wayne yeargain
To: montgomery_boats@mailman.xmission.com
Sent: Monday, February 10, 2003 8:24 PM
Subject: Re: M_Boats: M17 line drawings

Sounds good, I'll look for them in the mail.
 
Wayne
----- Original Message -----
From: Jerry Montgomery
To: montgomery_boats@mailman.xmission.com
Sent: Sunday, February 09, 2003 6:50 PM
Subject: Re: M_Boats: M17 line drawings

Hi Wayne- My drawings are all old pen & ink drawings.  Assusming you can w0ork with these, I'll copy the line drawing and send it off to you.  Give me a little time; I'm busyer than a one-armed paper hanger.
 
Jerry
----- Original Message -----
Sent: Wednesday, February 05, 2003 6:58 PM
Subject: M_Boats: M17 line drawings

Jerry
If you are still intrested I'd like to try to intregate your cad drawings with my system and
complete any areas necessary to get a complete plan & elevation drawings.
My boat is a '76 M17 and I can take measurements for items that are not on your drawings.
Let me know what you think
Contact me off line at saltydog@ev1.net
 
Wayne


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats