June 2018 - montgomery_boats - mailman.xmission.com

Fwd: Sailing on Ross Lake, WA
by Jason Leckie 25 Jun '18

25 Jun '18

Just in case others are interested..I mistakenly disconnected our email from the group.. ---------- Forwarded message --------- From: Jason Leckie <leckie.jas(a)gmail.com> Date: Sun, Jun 24, 2018, 8:52 PM Subject: Re: M_Boats: Sailing on Ross Lake, WA To: David Grah <d_b_grah(a)yahoo.com> Yes, it does look like a good ramp from Google maps with a dock to tie up to. Thanks for the info. On Sun, Jun 24, 2018, 5:43 PM David Grah, <d_b_grah(a)yahoo.com> wrote: > As I remember the ramp was a good paved ramp with adequate set up area. I > don't remember if there was a dock or not though Google Earth seems to show > one. > > > ------------------------------ > *From:* Jason Leckie <leckie.jas(a)gmail.com> > *To:* David Grah <d_b_grah(a)yahoo.com> > *Sent:* Sunday, June 24, 2018 3:32 PM > *Subject:* Re: M_Boats: Sailing on Ross Lake, WA > > Thanks David Grah, just wanted to make sure that the ramp is decent. I > have never launched my boat before and it doesn't have the tongue extension > so just wanted some reassurance that after that drive I wouldn't have any > issues with getting the boat in the water. Sounds like its all good. > > On Sun, Jun 24, 2018, 7:30 AM David Grah, <d_b_grah(a)yahoo.com> wrote: > > I made that video and it seems like others covered most of the details > pretty well. My brother, with the Montgomery 17 and who isn't active on the > list, goes to Ross Lake fairly often. It is an excellent destination though > a fairly long dusty road in. Going in through Canada was fairly > straightforward as I remember, though I was headed further north for a few > weeks. > > David Grah > Bishop California > > Message: 1 > Date: Fri, 22 Jun 2018 13:57:02 -0700 > From: Jason Leckie <leckie.jas(a)gmail.com> > To: For and about Montgomery Sailboats > <montgomery_boats(a)mailman.xmission.com> > Subject: M_Boats: Sailing on Ross Lake, WA > Message-ID: > <CAD2xLySaMWkaV0_woYwRtfU+0WUy9FjhGV+rNRdoSk8c3a1jZQ(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Has anybody sailed on Ross Lake in the North Cascades National Park in > Washington State? I have been eyeing it up for a few years and hoping to > bring my Montgomery there. There is a launch ramp at the northern end of > the lake in BC. Was wondering the condition of the ramp etc. > > Been camping at Diablo Lake which is the next lake down below the dam of > Ross and is a gorgeous lake with glacial blue water. > > > >

1 0

Cruiser Challenge
by jerry＠jerrymontgomery.org 24 Jun '18

24 Jun '18

There are 21 entries for the Cruiser Challenge, even tho the race is over a month away. 2 M-15’s, three 17’s, and a Sage 17

1 0

Sailing on Ross Lake, WA
by David Grah 24 Jun '18

24 Jun '18

I made that video and it seems like others covered most of the details pretty well. My brother, with the Montgomery 17 and who isn't active on the list, goes to Ross Lake fairly often. It is an excellent destination though a fairly long dusty road in. Going in through Canada was fairly straightforward as I remember, though I was headed further north for a few weeks. David GrahBishop California Message: 1 Date: Fri, 22 Jun 2018 13:57:02 -0700 From: Jason Leckie <leckie.jas(a)gmail.com> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: M_Boats: Sailing on Ross Lake, WA Message-ID: <CAD2xLySaMWkaV0_woYwRtfU+0WUy9FjhGV+rNRdoSk8c3a1jZQ(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Has anybody sailed on Ross Lake in the North Cascades National Park in Washington State? I have been eyeing it up for a few years and hoping to bring my Montgomery there. There is a launch ramp at the northern end of the lake in BC. Was wondering the condition of the ramp etc. Been camping at Diablo Lake which is the next lake down below the dam of Ross and is a gorgeous lake with glacial blue water.

1 0

1976 M17 price reduction
by bownez＠juno.com 24 Jun '18

24 Jun '18

Located in Mpls, Mn https://minneapolis.craigslist.org/hnp/boa/d/1976-montgomery-17-sailboat/66… Mr. Bones ____________________________________________________________ Buckingham Confirms Unfortunate News risingstarnewspaper.com http://thirdpartyoffers.juno.com/TGL3141/5b2f7f11555977f114ad7st04vuc

1 0

M-17 for sale, Massachusetts
by John Tyner 23 Jun '18

23 Jun '18

Just browsing around and saw this http://www.sailboatlistings.com/view/73730 thought someone out there might be interested. John Tyner M-15#412 "Chimpanzee"

4 4

Rudder length
by doug 23 Jun '18

23 Jun '18

Having just bought a M-15 from 1980, I am wondering if the rudder that I have is the right length and weight. This one is made of teak, solid teak over an inch thick. What is the length of the standard rudder for a M-15 and it will be used for cruising and day sailing, not racing if that makes a difference. I sure appreciate the combined knowledge and experience of this group. I saw it in action today in regards to another issue that came up here. Thanks. Doug M-15, 1980

7 16

On the subject of rudders
by Andrew Nelson 21 Jun '18

21 Jun '18

What is the best way to protect the original mahogany rudder from the salt water? Last year I kept my M17 in the salt water. Every time I finished sailing I would pull the rudder of the boat. Rinse it off with freshwater on the dock. Dry it. Then store it in the cabin of my boat. Andrew M17 #348 Seabeck, WA

3 2

Re: M_Boats: Rudder length
by Gary Oberbeck 21 Jun '18

21 Jun '18

When Marty sailed with me I had a great time - I believe the results were more than adequate! I think we beat you by ONE point for the weekend. That is Marty 'Stretch' in the companionway - a tall drink there! Tell Marty to bring kneepads/shin guards with that GPS as he will need them! (He was most enjoyable , knowledgable and motivated - I had a REALLY good time sailing with him!) You......? won't listen to the voice of reason!! {;>) Take Care, have fUn! Go sail - you need the practice!!!! You can clean up our boat after we 'spank you!' Gary Oberbeck fairandsquare1(a)gmail.com -----Original Message----- From: jerry <jerry(a)jerrymontgomery.org> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Sent: Wed, Jun 20, 2018 3:23 pm Subject: Re: M_Boats: Rudder length I don't remember making any teak rudders for the 15, but it could have been special order. Made lots of dinghy boards of teak back in the good old days when teak was 2.00 per foot- the guy, Marty, who made most of them for me is sailing with me at the Cruiser Challenge! Obviously, we're going to clean up on Gary O and Stan. -----Original Message----- From: Dave Scobie Sent: Wednesday, June 20, 2018 2:20 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Rudder length My old M15's www-site has photos that may help give you an idea of rudder size. www.freewebs.com/m15-named-scred/ Maybe Jerry did a few teak rudders for the first M15s (as yours is one of the 11 buily in 1980). :: Dave Scobie :: M17 #375 SWEET PEA - m17-375.com On Wed, Jun 20, 2018, 1:55 PM Doug <doug9326(a)gmail.com> wrote: > This rudder is solid one piece of teak. It is shaped but no idea if its > the right shape. Guess I need to run into another M15 owner and compare > rudders. Wait, that doesn't sound right!! > > ⁣Sent from BlueMail > > On Jun 20, 2018, 2:45 PM, at 2:45 PM, Dave Scobie <scoobscobie(a)gmail.com> > wrote: > >Doug: > > > >If the rudder was made by Jerry it should be mahogany. As I've no > >access > >to a M15 will need to have another person report the measurements or > >Jerry > >will comment. > > > >Being short is more of an issue than long. Jerry designed the boat to > >have > >a good amount of rudder depth. 'about 1" thick is likely close to > >correct > >for a M15/17 width/cord. > > > >Next is shape. Jerry is pretty particular that shape is correct. See > >- > > > >http://www.sagemarine.com/SCA_articles/SCA_pdf/smalltalk_55.pdf > > > >(Link will open a PDF) > > > >Rudder shape should be an NACA0012. > > > >Using a poorly shaped or matched rudder to the boat will make the boat > >sail > >POORLY! A poorly sailing boat is one that isn't going to be used. > >This is > >also why your boat should also have sails that are not work out - if > >the > >sails on your boat are original or older than 10 years it is time for > >new > >ones! #1 reason most boats sail poorly is blown out sails! > > > > > >:: Dave Scobie > >:: M17 #375 SWEET PEA - m17-375.com > > > >On Tue, Jun 19, 2018, 9:06 PM doug <doug9326(a)gmail.com> wrote: > > > >> Having just bought a M-15 from 1980, I am wondering if the rudder > >that I > >> have is the right length and weight. This one is made of teak, solid > >teak > >> over an inch thick. What is the length of the standard rudder for a > >M-15 > >> and it will be used for cruising and day sailing, not racing if that > >makes > >> a difference. I sure appreciate the combined knowledge and > >experience of > >> this group. I saw it in action today in regards to another issue > >that came > >> up here. Thanks. > >> > >> Doug > >> M-15, 1980 >

1 0

Re: M_Boats: Bow pulpit. My boat did not come with a bow pulpit. Is there any resource for getting one made or used.
by Dave Scobie 19 Jun '18

19 Jun '18

Catalina Direct sells a mount that you can bolt on to the pulpit to hold an Aqua Signal series 25 bi-color light - https://www.catalinadirect.com/index.cfm/product/3707/navigation-light-brac… :: Dave Scobie :: M17 #375 SWEET PEA - m17-375.com On Tue, Jun 19, 2018, 12:35 AM Lawrence Winiarski via montgomery_boats < montgomery_boats(a)mailman.xmission.com> wrote: > > If you get the pulpit, I might suggest getting it ready for wiring for a > bow light before installing it. A bow lighton the pulpit is nicer than a > deck mount as the jib is in the way. > > It would be nice to have a little square piece of metal at the top of the > pulpit welded, ready to attach a bow light, with anhole for the bow light > wiring to go into the pulpit, along with drilling an entrance hole in the > bottom, so the wires can be > fully inside the pulpit and run from the cabin up through the railing. > Easier to do now, rather than later. > > > > > > From: "jerry(a)jerrymontgomery.org" <jerry(a)jerrymontgomery.org> > To: For and about Montgomery Sailboats < > montgomery_boats(a)mailman.xmission.com> > Sent: Monday, June 18, 2018 11:11 PM > Subject: Re: M_Boats: Bow pulpit. My boat did not come with a bow pulpit. > Is there any resource for getting one made or used. > > Try Railmakers in Costa mesa, CA- That's who I bought them from. > > > On 06/18/2018 08:21 PM, Doug wrote: > > New member here from Bend, OR. just bought a Montgomery 15. >

4 4

How to post a Montgomery 17 for sale
by Leonardo J. Velázquez 18 Jun '18

18 Jun '18

Hello: I would like to post a Montgomery 17 I am selling. Please advise how to go about it. Thanks a lot. Leonardo J. Velazquez

3 2