September 2015 - montgomery_boats - mailman.xmission.com

Proud new owner
by Thomas Buzzi 06 Sep '15

06 Sep '15

I second the recommendation about OCH videos. When the conditions outside are not conducive to sailing you can always go to Off Center Harbor. Their videos on tool prep are also great as well as the extensive video section about other boaters and where they are doing what. Lots of vicarious fun to be had there also. Fair winds, Tom B. Mont.17, AS-IS

2 1

Re: M_Boats: Proud new-used owner!
by GILASAILR＠aol.com 06 Sep '15

06 Sep '15

Congrats on the new boat! GO M-17t Sail # 354 ' Tiny Purple Fishes' In a message dated 9/5/2015 11:54:36 P.M. US Mountain Standard Time, john(a)eco-living.net writes: Hi all, I am happy to post that I am now the (proud) new owner of "Pajarita," a 1974 Montgomery 17 previously owned by John Chalk. Woo hoo! One picture attached - former owner John Chalk to viewer's right, me to left. Red hull no less. Or maybe orange originally - there are some small rub spots where a sort of mid-70's-trendy orange appears to show through the redder (and faded here and there) color, and what appears to be a thin layer of gray (primer?) between the two. I'll have more questions soon for those of you who own, or have owned, a similar vintage M-17, as I sort out what is original and what is modified and what I might want to modify. And, she is ready to sail as-is! cheers, John S. -- John Schinnerer - M.A., Whole Systems Design -------------------------------------------- - Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john(a)eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com

2 1

Re: M_Boats: Roller Furling
by GILASAILR＠aol.com 05 Sep '15

05 Sep '15

Ask 'Customer Service' at Harken what the difference actually is between the two - may be (as some parts are) the difference between delrin balls or 'torlon' balls in the bearings, they are sometimes interchangeable. GO In a message dated 9/4/2015 7:31:26 P.M. US Mountain Standard Time, griemmolo2(a)gmail.com writes: Wrinkle Boat Mates I am in the processing of researching a Harken Furler #434 Lo Load 500 lbs, @ $316 vs #435 Hi Load 950 lbs @ $365. Max wire size 1/8 inch on both Q 1. Is the Lo Load sufficient on a M15? Q 2. Is the extra $49 for a Hi Load worth it? George "We Can Not Control the Wind But We Can Adjust Our Sails"

1 0

Montgomery 15 Reupholstery
by David Grah 04 Sep '15

04 Sep '15

After a month living out of the boat on the road and a lot of sailing use this summer, it's time to recover the cabin and cockpit cushions in our 1986 Montgomery 15. I am not sure the upholstery shops in Bishop are adequately experienced and able selecting coverings and doing boat reupholstery, so am hoping to find a good place somewhere in California or Nevada that regularly does this sort of this where I could take the cushions. Would anyone in the group suggest a place to do it? It would be great to hear any experiences you have with going or having this sort of work done as well. Thanks! David Grah Bishop California Montgomery 15 - Sky

3 2

Re: M_Boats: Floppy rig
by Steven C. Gordon 03 Sep '15

03 Sep '15

David, I have a CDI furler on my M17 and don't use a toggle on the forestay. I asked a rigging guy at West Marine and he said it wasn't needed. I just have a clevis pin that goes through the swaged eye on the forestay and the holes in the mast head fitting on either side of the stay. This allows the forestay and furler to move in the fore and aft direction when raising the mast. I'm careful to keep the furler as straight as possible when raising the mast. When the mast is up, everything is tight and there's almost no movement. Maybe someone else can explain why a toggle is important -- I don't see the need for it. Steve On September 2, 2015, at 1:19 PM, Dave Scobie <scoobscobie(a)gmail.com> wrote: David: the toggle for the headstay will have added, best guess, an inch to the forestay. i'm guessing you have turned the forestay and backstay turnbuckles 'down' all the way? -- :: Dave Scobie :: former M15 owner - www.freewebs.com/m15-named-scred :: M17 #375 SWEET PEA - www.m17-375.webs.com > On Tuesday, September 1, 2015, David Hill <david(a)dfhill.com> wrote: > > > Advice please. I put CDI furling on my M17. Per instructions I added a > > toggle to the top of the head stay. Now with both head stay and back stay > > tightened down as far as they go the rig is a bit floppy. Problem? Any > way > > to make it a tighter? Thanks. > > > > David > > > > > > >

2 1

I spy 2 Montgomery's and a M7-11 dinghy in Friday Harbor
by Becky Belding 03 Sep '15

03 Sep '15

These pics were sent to me today by a Montgomery admirer and past owner of my boat at Friday Harbor. Becky #393 "Grace" Sent from my iPad

4 6

Floppy rig
by David Hill 02 Sep '15

02 Sep '15

Advice please. I put CDI furling on my M17. Per instructions I added a toggle to the top of the head stay. Now with both head stay and back stay tightened down as far as they go the rig is a bit floppy. Problem? Any way to make it a tighter? Thanks. David

4 3

Re: M_Boats: How 'bout spinakers?
by GILASAILR＠aol.com 01 Sep '15

01 Sep '15

Tom, I sail with an Ullman .5oz spinnaker on a fairly regular basis (25 years old - stored indoors in A/C'ed house) and it seems fine over the years - of course one day......Check with Keith Magnussen at Ullman Sails Newport Beach - and lucky for you - the 'Fall Sale' is on! (bought mine on Fall Sale - great deal) NFIW - they just sell me sails Keith Magnussen - 714-432-1860 (w) 714-206-1002 (m) "Take advantage of biggest sale of the year and receive up to 25% off sails for your boat. Call Today for details: 714-432-1860 Offer Expires September 14th 2015" Judy B. may chime in here too. Jerry M. has a nice chute we used last year at Dory Taylor Cup for Cruiser Challenge - real nice sail too - Jerry?? - are you building a boat in Colorado?? I am not sure who made that sail - nice one though. Good Luck, Have Fun, Go Sailing - still too hot here but SOON! Photo of excellent crew/M-17 'frankenstein' owner, Craig Painter watching for shifts. Second photo (maybe) (credit: Michael Hess or S.Mulligan) - Three Stooges - J.M. , S.S., yours truly. GO In a message dated 8/31/2015 3:03:00 P.M. US Mountain Standard Time, Thomas(a)thomashoweonline.com writes: Flew the 30 year old spinnaker on my M-17 over the weekend, it's a .5oz spinnaker, and it began to rip. I used the Sail Ripair tape, and patched it up, but I'll need to replace it fairly soon. I'd be interested in what the group thinks make a good spinnaker, and how they'd replace what I have. I'd really be interested in input from Hyde Sails representative here, and any other M-17 sailors with experience.

1 0

Re: M_Boats: montgomery_boats Digest, Vol 151, Issue 1
by Karen & Smiley 01 Sep '15

01 Sep '15

Dave, Hyde sails are not made in the USA but I am sure you knew that. None better than working with the informative Dr Judy B on your canvas needs. She made M15 # 616 faster :) Karen & Smiley Magoo252(a)comcast.net -----Original Message----- From: montgomery_boats [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of montgomery_boats-request(a)mailman.xmission.com Sent: Tuesday, September 1, 2015 2:00 PM To: montgomery_boats(a)mailman.xmission.com Subject: montgomery_boats Digest, Vol 151, Issue 1 Send montgomery_boats mailing list submissions to montgomery_boats(a)mailman.xmission.com To subscribe or unsubscribe via the World Wide Web, visit https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats or, via email, send a message with subject or body 'help' to montgomery_boats-request(a)mailman.xmission.com You can reach the person managing the list at montgomery_boats-owner(a)mailman.xmission.com When replying, please edit your Subject line so it is more specific than "Re: Contents of montgomery_boats digest..." Today's Topics: 1. Montgomery 15 Reupholstery (David Grah) 2. How 'bout spinakers? (Thomas Howe) 3. Re: How 'bout spinakers? (Dave Scobie) 4. Re: Montgomery 15 Reupholstery (Tom Jenkins) ---------------------------------------------------------------------- Message: 1 Date: Mon, 31 Aug 2015 20:23:07 +0000 (UTC) From: David Grah <d_b_grah(a)yahoo.com> To: For and About Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: M_Boats: Montgomery 15 Reupholstery Message-ID: <399424736.3673003.1441052587294.JavaMail.yahoo(a)mail.yahoo.com> Content-Type: text/plain; charset=UTF-8 After a month living out of the boat on the road and a lot of sailing use this summer, it's time to recover the cabin and cockpit cushions in our 1986 Montgomery 15. I am not sure the upholstery shops in Bishop are adequately experienced and able selecting coverings and doing boat reupholstery, so am hoping to find a good place somewhere in California or Nevada that regularly does this sort of this where I could take the cushions. Would anyone in the group suggest a place to do it? It would be great to hear any experiences you have with going or having this sort of work done as well. Thanks! David Grah Bishop California Montgomery 15 - Sky ------------------------------ Message: 2 Date: Mon, 31 Aug 2015 22:02:38 +0000 From: Thomas Howe <Thomas(a)thomashoweonline.com> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: M_Boats: How 'bout spinakers? Message-ID: <SN1PR11MB071951B8BD27BF0583654739AF6B0(a)SN1PR11MB0719.namprd11.prod.outlook. com> Content-Type: text/plain; charset="utf-8" Flew the 30 year old spinnaker on my M-17 over the weekend, it's a .5oz spinnaker, and it began to rip. I used the Sail Ripair tape, and patched it up, but I'll need to replace it fairly soon. I'd be interested in what the group thinks make a good spinnaker, and how they'd replace what I have. I'd really be interested in input from Hyde Sails representative here, and any other M-17 sailors with experience. ------------------------------ Message: 3 Date: Mon, 31 Aug 2015 16:05:25 -0600 From: Dave Scobie <scoobscobie(a)gmail.com> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: Re: M_Boats: How 'bout spinakers? Message-ID: <CAGjBOA4QX2PmcgPLFwb6FuUjUudacHwNDiY+Dhs0kNx1xD0sLw(a)mail.gmail.com> Content-Type: text/plain; charset=UTF-8 Harry with Elliott/Pattison sailmakers can make you a spinnaker ... he is also 100% made in the USA. -- :: Dave Scobie :: former M15 owner - www.freewebs.com/m15-named-scred :: M17 #375 SWEET PEA - www.m17-375.webs.com On Mon, Aug 31, 2015 at 4:02 PM, Thomas Howe <Thomas(a)thomashoweonline.com> wrote: > Flew the 30 year old spinnaker on my M-17 over the weekend, it's a > .5oz spinnaker, and it began to rip. I used the Sail Ripair tape, and > patched it up, but I'll need to replace it fairly soon. I'd be > interested in what the group thinks make a good spinnaker, and how > they'd replace what I have. I'd really be interested in input from > Hyde Sails representative here, and any other M-17 sailors with experience. > > ------------------------------ Message: 4 Date: Mon, 31 Aug 2015 15:31:47 -0700 From: Tom Jenkins <tjenkins(a)schat.net> To: David Grah <d_b_grah(a)yahoo.com>, For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: Re: M_Boats: Montgomery 15 Reupholstery Message-ID: <8D6CEAC7-3F42-4FD7-B8E8-04D88ECBB952(a)schat.net> Content-Type: text/plain; charset=utf-8 I don?t know about upholstery, but Eddy?s Upholstery in Bishop has made beautiful Sunbrella custom boat covers for my (former) Nor?Sea 27 and Montgomery 15, and custom boom covers and jib bags for both boats and a Potter 14 as well. The Potter boom cover looks as good as it did when they made it 35 years ago. > On Aug 31, 2015, at 1:23 PM, David Grah via montgomery_boats <montgomery_boats(a)mailman.xmission.com> wrote: > > After a month living out of the boat on the road and a lot of sailing use this summer, it's time to recover the cabin and cockpit cushions in our 1986 Montgomery 15. > > I am not sure the upholstery shops in Bishop are adequately experienced and able selecting coverings and doing boat reupholstery, so am hoping to find a good place somewhere in California or Nevada that regularly does this sort of this where I could take the cushions. Would anyone in the group suggest a place to do it? It would be great to hear any experiences you have with going or having this sort of work done as well. > Thanks! > David Grah > Bishop California > Montgomery 15 - Sky ------------------------------ Subject: Digest Footer _______________________________________________ montgomery_boats mailing list montgomery_boats(a)mailman.xmission.com https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats Remember, there is no privacy on the Internet! ------------------------------ End of montgomery_boats Digest, Vol 151, Issue 1 ************************************************

1 0