September 2014 - montgomery_boats - mailman.xmission.com

Re: M_Boats: Minneapolis Winter Boat Storage
by bownez＠juno.com 19 Sep '14

19 Sep '14

Hi Henry, Actually, it was my M23 I was referring to in the storage E-mail. My M17 has been sitting in storage all summer in a barn by Roberts, WI. I had plans on sailing her on Long Lake in WI this August, but time slipped by. It will be next summer before she comes out to play (again). Bones ____________________________________________________________ Buffett's "Real Threat"â¦ See the technology W. Buffett calls the "Real Threat" to his fortune. http://thirdpartyoffers.juno.com/TGL3141/541b90112b93010111a2fst01vuc

1 0

Re: M_Boats: Minneapolis Winter Boat Storage
by bownez＠juno.com 18 Sep '14

18 Sep '14

Greetings Steve, I store my M23 in a farmers pole barn in New Trier, Mn. It is about 25 miles south of town. If you wish, I can ask him if he has additional room for your M15. Inside storage IS the way to go in Mn. No tarps, no snow buildup, no ice. Bones ____________________________________________________________ The End of the "Made-In-China" Era The impossible (but real) technology that could make you impossibly rich. http://thirdpartyoffers.juno.com/TGL3141/541adbca742bb5bca7d90st04vuc

2 1

Clunking centerboard
by Thomas Buzzi 18 Sep '14

18 Sep '14

Thanks to one and all for this "string". I will continue to let my cast iron cb rest on the pin. Read your article, Jerry, about shaping the board on Coyote. Spent four hours yesterday cleaning up the cb casting on my 17. Have found that grinding cast iron deposits some very strange goo on my clothing that will not wash out. I may have invented a totally useless compound though, one part cast iron dust, one part dress shirt dye and three parts perspiration. Once I get that trailing edge down to about 1/8 inch I expect to be able to pull TWO water skiers with the boat this coming season. Then both my son and his fiancee can ski at the same time. Good stuff. Messin' about in boats, Tom B, Mont.17, #258

1 0

Minneapolis Winter Boat Storage
by Steven Lindeman 18 Sep '14

18 Sep '14

We are heading toward our first winter living in Minneapolis and I need a recommendation on where to store my Monty 15 and trailer, preferably indoors. Please send me any recommendations. I am located in the west metro area in St Louis Park. Thanks, Steve Lindeman 2009 Montgomery 15

2 1

Centerboard clunk
by Thomas Buzzi 18 Sep '14

18 Sep '14

Now that I have the board out, it looks like the diameter of the notch that stops the board from go down too far on my 17 is large enough that I can slip a dense rubber sleeve over the thru bolt that catches the notch in the board. That should relieve that last "thunk" when lowering the board which has always set my teeth on edge. A second consideration, since the board was also deeply grooved on both sides where it worked against the bottom edge of the cb trunk when fully lowered is to adhere some sort of vinyl sweep on the bottom inside edge of the cb slot. The vinyl sweep should be easier on the bottom paint on the board and should mitigate the side to side action of the board in the slot. By placing the sweeps right at the bottom of the cb truck they should also help with the slot turbulence. No? Nice to have a situation like this to chew on at four in the morning.[?] Tyler's idea about using cutting board material merits further consideration also. Good idea. Tom B, M17, '77, as yet 'no name'. I think it is waiting until I get it back on the trailer to tell me what it's name is.

6 16

M15 Centerboard Clunk
by Tyler Backman 16 Sep '14

16 Sep '14

I finally did my first water test of the M15 I'm restoring, but I noticed that it has a centerboard clunk- I can hear the centerboard rocking back and forth left and right whenever the boat isn't heeled. I just recently replaced my old swollen centerboard with a new thinner one, and it's somewhat narrower than the width of the centerboard slot. Is this typical on an M15? Has anyone with this problem installed shims or something similar? I am planning to epoxy on some fiberglass shims to the outside of the centerboard to increase it's width slightly, but first I'd like to hear if anyone else has encountered this issue before and what they did to resolve it. I also currently have a stainless steel pivot pin, but am planning to replace it with silicon bronze at the same time as I pull the centerboard to widen it. Tyler Davis, CA M15 #157 "Defiant"

4 7

Look familiar?
by Chesley Sugg 16 Sep '14

16 Sep '14

interesting boat for sale in England. It has a very familiar look. http://creeksailor.blogspot.com/2014/09/dadson16-creek-crawler-for-sale.html Ches

1 0

Re: M_Boats: Roller furling
by Mark Dvorscak 16 Sep '14

16 Sep '14

I might be interested in your sails if they're significantly better than mine. Sent from my U.S. Cellular® smartphone Bruce Ward <northwave(a)telus.net> wrote: >thanks for everyone's input on the furler option for the 23. We sailed our M17 with a Schaefer CF 500 for 7 years here in northern British Columbia. it is expensive to buy new sails and gear but we are going with the Schaefer CF 700 and buying a new genoa. I'm sure it is compromise from having the four hank on headsails I have on the 23 . BTW, these are in good shape and may be had reasonably priced if anyone is considering finding better than what they currently have. > > > >Sent from my iPad

1 0

M15 Centerboard Clunk
by David Grah 16 Sep '14

16 Sep '14

The centerboard in my Montgomery 15 clunks like crazy if there are waves and little or no wind. I've always assumed that is typical. David Grah Bishop California Montgomery 15 - Sky Message: 2 Date: Tue, 16 Sep 2014 10:35:07 -0700 From: Tyler Backman <casioqv(a)usermail.com> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: M_Boats: M15 Centerboard Clunk Message-ID: <C3172B4A-C1CD-43F0-B66C-87ADB37DEBBE(a)usermail.com> Content-Type: text/plain; charset=us-ascii I finally did my first water test of the M15 I'm restoring, but I noticed that it has a centerboard clunk- I can hear the centerboard rocking back and forth left and right whenever the boat isn't heeled. I just recently replaced my old swollen centerboard with a new thinner one, and it's somewhat narrower than the width of the centerboard slot. Is this typical on an M15? Has anyone with this problem installed shims or something similar? I am planning to epoxy on some fiberglass shims to the outside of the centerboard to increase it's width slightly, but first I'd like to hear if anyone else has encountered this issue before and what they did to resolve it. I also currently have a stainless steel pivot pin, but am planning to replace it with silicon bronze at the same time as I pull the centerboard to widen it. Tyler Davis, CA M15 #157 "Defiant"

1 0

FW: Roller furling on an M23
by George R. Iemmolo 16 Sep '14

16 Sep '14

-----Original Message----- From: George R. Iemmolo [mailto:griemmolo2@gmail.com] Sent: Sunday, September 14, 2014 8:41 AM To: 'For and about Montgomery Sailboats' Subject: RE: M_Boats: Roller furling on an M23 Bruce I would not have been able to sail my Person 23 without a roller Furler. I had a continuous line Furler on it but had a Single line Furler on my WWP15 both did the job. Presently have a hank on Jib for my M15. Go for it you will love it. George Merry Helen II 96 M15 602 -----Original Message----- From: montgomery_boats [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Bruce Ward Sent: Saturday, September 13, 2014 11:58 PM To: montgomery_boats(a)mailman.xmission.com Subject: M_Boats: Roller furling on an M23 anyone have a comment on their experience with roller furling on their M23? my Ole'Body does not work so well with going forward single handed to hank on a smaller jib when the wind pipes up. I'd appreciate hearing here or off list . Thanks, Sent from my iPad

1 0