November 2011 - montgomery_boats - mailman.xmission.com

Hollow roach main sail
by Bill Wickett 18 Nov '11

18 Nov '11

Are any M-boaters sailing with a hollow roach main with no battens? Is so, do you like the results? Any discernable performance difference from a battened main, with some positive roach? I like the idea of no battens to contend with. Thanks. Bill Wickett Makin' Time M17 #622

3 2

Re: M_Boats: Wood Glue / vinegar
by SALGLESSER＠aol.com 18 Nov '11

18 Nov '11

Had a friend that was married to a Japanese woman. He was waiting for a heart transplant and using modern drugs, couldn't get his cholesterol down enough for the operation. He then went to his wife's Dr. who put him on a regiment of one tablespoon of vinegar in a glass of water twice a day and his cholesterol was down enough in a month to have his operation. Whodathunk? sal In a message dated 11/18/2011 10:27:11 A.M. Mountain Standard Time, seagray(a)embarqmail.com writes: Does it have to be brown cider vinegar? Is clear OK. Never heard of using vinegar for this kind of work. Just another great thing to add to the list of all the unique and wonderful things that you can do with vinegar. Thanks everyone for all the great advice on the Wood Glue. JOe SeaFrog M17 ----- Original Message ----- From: wudnboatlovr(a)aol.com To: montgomery_boats(a)mailman.xmission.com Sent: Friday, November 18, 2011 6:27 AM Subject: Re: M_Boats: Wood Glue When working with epoxy, I keep a bottle of brown cider vinegar handy. It is a very effective, non-flamable solvent for epoxy clean-up. I even use it to make disposable brushes re-usable. Try it! You'll like it. Leif Eriksson -----Original Message----- From: jerry montgomery <jerry(a)jerrymontgomery.org> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Sent: Wed, Nov 16, 2011 2:32 pm Subject: Re: M_Boats: Wood Glue I think Dave is essentially correct, except that if you use oval heads (I on't think you need washers) just bed the shelves in epoxy putty, and the est procedure would be to drill and install the shelves dry and run masking ape around the shelves (on the inside of the bulkhead), then remove the helves, cleanly spread the epoxy putty using a slight excess, screw the helves in place, then using a sharp putty knife clean up the excess that's queezed out, then pull the tape. If you do a clean job there won't be any ess to clean up, but if you can't help being a clumsy fool, the mess can be leaned up with lacquer thinner. Acetone will clean up the mess but it'll reat another by attacking the gelcoat that the inside of the bulkhead is ainted with. jerry ---- Original Message ----- rom: "W David Scobie" <wdscobie(a)yahoo.com> o: "For and about Montgomery Sailboats" montgomery_boats(a)mailman.xmission.com> ent: Wednesday, November 16, 2011 10:43 AM ubject: Re: M_Boats: Wood Glue oe: if i understand your reference to 'JB weld' correctly you are just going to lue a piece of wood to the bulkhead (ie, a butt joint). my concern is that this joint will come apart ... mostly from the abuse our oats experience bouncing on their trailers along the roads and highways. i've thought of installing shelves as you describe to my M17. over and over 've come the following opinion - better - tab your attachment points to the bulkhead using epoxy and iberglass mat & cloth. best - screw or bolt thru the bulkhead along with tabbing as noted above in better'. use oval head fasteners and finishing washers. : Dave Scobie : Sage Marine --- On Wed, 11/16/11, Joe Murphy <seagray(a)embarqmail.com> wrote: The top of the shelves will have a box to cover the backside of the compass on the port side and the depth gauge on the starboard side. Inside the box I'll use a block attached with JB weld and at the bottom I'll use a french hasp. I'll post pictures when it's all done. Joe SeaFrog M17 ----- Original Message ----- From: W David Scobie Sent: Wednesday, November 16, 2011 12:08 PM joe: matt, sage marine's woodworking guy, recommends (in order listed) - * west system epoxy or * titebond 3 (used for exterior applications) are you going to bolt/screw through the cabin bulkhead to hand the shelves? :: Dave Scobie :: Sage Marine --- On Wed, 11/16/11, Joe Murphy <seagray(a)embarqmail.com> wrote: > I'm making mahogany bulkhead shelves > to put on the inside cabin bulkhead. I'm looking for > advice on what would be the best glue to use for > mahogany. I'll use typical morticed joints and babbet > corners and prefer not to use any screws, etc. > Thanks much > Joe > SeaFrog M17 > -- am using the free version of SPAMfighter. e are a community of 7 million users fighting spam. PAMfighter has removed 5834 of my spam emails to date. et the free SPAMfighter here: http://www.spamfighter.com/len The Professional version does not have this message

3 2

Invitation to connect on LinkedIn
by Irv Kooris 17 Nov '11

17 Nov '11

I'd like to add you to my professional network on LinkedIn. - Irv Irv Kooris Director, Associate Services at The Home Depot Greater Atlanta Area Confirm that you know Irv Kooris: https://www.linkedin.com/e/-at84y9-gv480jww-57/isd/4948371977/0OEzWS2r/?hs=… -- You are receiving Invitation to Connect emails. Click to unsubscribe: http://www.linkedin.com/e/-at84y9-gv480jww-57/qP6Cbr0HzIWTwWxA-NUC86iFQlbXl… (c) 2011 LinkedIn Corporation. 2029 Stierlin Ct, Mountain View, CA 94043, USA.

1 0

Re: M_Boats: WrinkleBoat Ran-Tan 2012 January 13-15 Phoenix ALL invite d !
by SALGLESSER＠aol.com 17 Nov '11

17 Nov '11

Great song Connie. Now we need a You Tube video of you singing and playing. sal In a message dated 11/15/2011 2:55:14 P.M. Mountain Standard Time, chbenneck(a)sbcglobal.net writes: On 15-Nov-11 9:37 AM, bownez(a)juno.com wrote: Hi Bones, I tried my hand at creating a song. It goes to the tune of "O Tannenbaum, O Tannenbaum" "O Christmas Tree, O Christmas Tree" The music is simple and everyone probably knows it. My first attempt at writing verse reads: > Oh Wrinkle Boat > > Oh Wrinkle Boat, > > How glad I am that we're afloat > > You take me out to mermaid-land > > And bring me back all nice and tan > > Oh Wrinkle Boat, > > Oh Wrinkle Boat > > How glad I am when we're afloat. > > Oh Wrinkle Boat > > Oh Wrinkle Boat > > How happy that we are afloat > > You rock me gently to and fro > > The World's in order; life is slow > > Oh Wrinkle Boat > > Oh Wrinkle Boat > > How happy that we are afloat > > Oh Wrinkle Boat > > Oh Wrinkle Boat > > How happy I am when we're afloat > > With lee-rail under and getting wet > > Or greeting porpoises, we've just met > > Oh, Wrinkle Boat > > Oh Wrinkle Boat > > How happy I am when we're afloat > > Oh Wrinkle Boat > > Oh Wrinkle Boat > > How happy I am when we're afloat > > The water's blue, we drift along > > And sing a verse of this foolish song > > Oh Wrinkle Boat > > Oh Wrinkle Boat > > How nice it is to be afloat. > Connie > > Hi Connie! Good to hear from you.I'll get to work on the M-boat song.... "Wrinkle Boat, Wrinkle Boat, Wrinkle Boat Rock, keep us safe and avoid the rock ...." > > > Bones > ____________________________________________________________ > Penny Stock Soaring 3000% > Sign up for Free to find out what the next 3000% Stock Winner is! > http://thirdpartyoffers.juno.com/TGL3141/4ec2793cbc8d77fbddst02vuc >

1 0

Fwd: WrinkleBoat Ran-Tan 2012 January 13-15 Phoenix ALL invited !
by GILASAILR＠aol.com 17 Nov '11

17 Nov '11

"bump"

1 0

Re: M_Boats: Fwd: WrinkleBoat Ran-Tan 2012 January 13-15 Phoenix ALL invited !
by GILASAILR＠aol.com 17 Nov '11

17 Nov '11

Jeff - Excellent ! I don't know if I have you 'counted' in the number of M-15's that are coming. I will check with Doug Kelch. Please - and a Thank You, for contacting Jake and Meryl H. The more the merrier - I look forward to seeing you at the Lake in January. Please feel free to email or call if there is anything we can do info or otherwise prior to the event. Thanks Again, Take Care, Have Fun, Go Sailing. GO

1 0

Fwd: WrinkleBoat Ran-Tan 2012 January 13-15 Phoenix ALL invited !
by GILASAILR＠aol.com 17 Nov '11

17 Nov '11

We have commitments for : 5 M-17's and 3 M-15's Email if you have any questions Gary O. gilasailr(a)aol.com

2 1

Re: M_Boats: WrinkleBoat Ran-Tan 2012 January 13-15 M15s wanted :-)
by GILASAILR＠aol.com 17 Nov '11

17 Nov '11

Great - Thanks 5 - M-17's 3 - M-15's 11/16/11 GO

1 0

Re: M_Boats: WrinkleBoat Ran-Tan 2012 January 13-15 M15s wanted :-)
by GILASAILR＠aol.com 17 Nov '11

17 Nov '11

Bill, The only thing I can suggest at this point is I will 'bump' the notice on the Montgomery Owners board and do the same at TSSBB, LHPCC. I have no way to get those emails. Any suggestions are appreciated. GaryO

2 1

Wrinkle Boat Ditty
by bownez＠juno.com 16 Nov '11

16 Nov '11

Sweet Connie! Jerry M, are you memorizing the lyrics?(You too Sal). (snicker).... Bones ____________________________________________________________ LifeLockÂ® Official Site Identity Theft Can Happen to Anyone So Get Protection with LifeLock. http://thirdpartyoffers.juno.com/TGL3141/4ec3159b295f7b9209st06vuc

1 0