- Fractint - mailman.xmission.com

Test FOTD...(Barry Smith Inquiry)
by Jay Litwyn 24 Feb '11

24 Feb '11

Author: Susan Brown Date: 2011-02-23 12:16 -700 To: fractint Subject: [Fractint] Test FOTD (snip) What followed was what I came to expect from Jim Muth, Barry, except it was a verbatim repeat. It looks like he dictated it to Susan Brown, and signed it at the end, except in this test, there is no explanation for the gap, nor is there any indication that he was going to hire an editor. I think Jim has made gaps in his work for "antiquing expeditions", before. So, I am as confused as you are. Five days are an exceptional delay.

3 2

Problems receiving FOTD
by Barry Smith 24 Feb '11

24 Feb '11

Fellow fractal enthusiasts: I have been subscribed to this list since April 1998 and while I have been a lurker have greatly enjoyed the FOTD (Thanks, Jim). Can anyone please explain why I have received no FOTD since 20 February? I know that there have been some because they have been on Hal Lane's web site (Thanks, Hal). Meanwhile, there have been over a dozen other messages. I use Thunderbird, and have checked my filters. I have also checked that Jim Muth, fractint-bounces(a)mailman.xmission.com <mailto:fractint-bounces@mailman.xmission.com> and fractint(a)mailman.xmission.com <mailto:fractint@mailman.xmission.com> are all in my Address Book and hence white-listed. In addition, my ISP says if it thinks a message is a scam; this hasn't happened. I am puzzled. *Barry W Smith* 7 Gidabal Street, Aranda ACT 2614, Australia Tel +61 2 6251 2119 e-mail barrys(a)grapevine.net.au

2 1

Re: [Fractint] Autumn Lilypads
by JackOfTradeZ＠comcast.net 23 Feb '11

23 Feb '11

. Autumn Lilypads Awesome!!! Now lemme see what I can do with that ...... .

2 1

Test FOTD
by Susan Brown 23 Feb '11

23 Feb '11

FOTD -- February 20, 2011 (Rating 5) Fractal visionaries and enthusiasts: An antiquing expedition did happen on Saturday, and it left very little time for a proper fractal search. However, I did manage to find an acceptable image, (rated a 5), in the parent fractal that results when the formula Z^(1.99)+C is iterated just one level up the complex logarithmic hyper-spiral and no function is applied. On its surface, this parent appears to be a normal everyday Mandelbrot set that has been rotated so that its main spike faces northeast instead of west. But problems arise on the negative X-axis, which in today's parent cuts through what is normally the southeast shore line of the main bay. Today's image lies in the mess of discontinuities in this small area. As would be expected, the image consists mostly of discontinui- ties. The name "Out of Order" refers to the fact that it is not normal for the negative X-axis to cut through the southeast shore line of the main bay of the M-set. The calculation time of 3-1/2 minutes may be cut to 2-1/2 minutes by resetting the passes to 'g', but doing so will cause some of the finer detail to be missed. Both speed and accuracy may be achieved by viewing the finished image on the current FOTD web site at: <http://www.emarketingiseasy.com/TESTS/FOTD/jim_muths_fotd.html> The original web site with all the past FOTD images may be accessed at: <http://www.Nahee.com/FOTD/> Lots of clouds, a strong northwest wind and a steadily falling temperature made Saturday anything but enjoyable here at Fractal Central. When the temperature dropped below freezing late in the afternoon, the fractal cats took to their shelf over the heat, where they enjoyed a comfortable evening. FL and I spent most of the day on an antiquing expedition. With the work just about caught up, the rest of the day was unevent- ful. The next FOTD will be posted in 24 hours. Until then, take care, and be satisfied with less than everything. Jim Muthjamth(a)mindspring.com START PARAMETER FILE======================================= Out_of_Order { ; time=0:03:33.75-SF5 on P4-2000 reset=2004 type=formula formulafile=basicer.frm formulaname=MandelbrotBC3 function=ident passes=1 center-mag=-0.58310178265/+0.00224032835/223521/1\ /-105/0 float=y params=1.99/0/1/0 logmap=107 maxiter=1750 inside=0 colors=000EJK9DD466I6mF5fD4`B3V93P62I41C206oUYiQUc\ NQYKMSGINDFHABB67533VTuSQpQOlNMgLKcJHZGFVEDQBBM98H\ 76D4482243tP2lL2eI1ZF1SC1L90E6073NfhIY_DPR9HI489z3\ ku2gq2dm2ai2Ze2W`1SX1PT1MP1JL1GG0CC09806403uvdqram\ nZjjXfgUbcS__PWXNTTKPPHLMFIICEEAAB7775332`7nB3lLpl\ JlhIheGebFaZEZWCVTBSQ9OM8LJ7HG5ED4A9276133FDnA8Y54\ H`P3YN2WL2TK2RI2OG2MF1JD1HB1EA1C81960750430210x8Ts\ 7Qn6Oi6Me5K`4HW4FS3DN3BI28E1691440264X53U43R42O32L\ 32I21F21C1191060038vk6lc5bW4TO2JGdAN`BJYBFRAMLATEA\ _8AeNPlacrorxjntfkpbhlYehUbdQ_aItsKmnLfiM_eOT`PMWQ\ FS865D7EirpU_ZFIHry9nt8jp7gl7ch6_d6X`5TX4PS4MO3IK3\ EG2BC1781340guSZiMQYGHNB8B55ld4g`4cY3_U3WR2SN2OK2K\ H1GD1CA086043kVD_N9OF6C73gsoXebMZQBcDdhXZmSTrNNvIH\ zEBz95z4SzdQzaOzZMzWKzUIzRGzOzzLzzJzzGzzDzzAzz8zz5\ zz2zzzzzzzzQzzzzzTzzzzz0zzzzzzzzzzzzzzzzzzzzzzzzzz\ zzzzzzzzzzzzzzzzzzzzzzzzz } frm:MandelbrotBC3 { ; by several Fractint users e=p1, a=imag(p2)+100 p=real(p2)+PI q=2*PI*fn1(p/(2*PI)) r=real(p2)+PI-q Z=C=Pixel: Z=log(Z) IF(imag(Z)>r) Z=Z+flip(2*PI) ENDIF Z=exp(e*(Z+flip(q)))+C |Z|<a } END PARAMETER FILE=========================================

1 0

Subscription test
by Susan Brown 23 Feb '11

23 Feb '11

This is a test to see if the subscription worked. Jim Muth

1 0

Micro$oft marjinally supports EMS, XMS, and DPMI.
by Jay Litwyn 23 Feb '11

23 Feb '11

David said: There's also an assortment of DOS extenders which maybe could help? <http://www.thefreecountry.com/programming/dosextenders.shtml> There is an XMS 3.01 specification. Windows XP does not deliver it, even though it was designed long before XP. It supports more than 64meg of RAM (or is the limit on XMS blocks set at 16meg?) with what it calls SXMS blocks. Curiously, DOS 6.22 delivers XMS 3.01, and so does OpenDOS. There is also a DPMI (DOS Protected Mode Interface) 1.0 specificaion (32bit), and Windows only supports version 0.9, which does not include everything you might want to do with a thirty-two bit API. That looks like planned obsolescence to me. There is a GDI+ environment that runs under Windows, and I had or hav a package that requires it. I think the jee stands for gnome: It is designed to port into X-Windows. Half of the trick of programming for a Graphical Application Programmer's Interface (GAPI) is finding the best documentation for it, whether tutorial or reference manual. If you are lucky, someone figured out what best documentation means and donated it to your local library. Beyond that, there is a Software Development Kit (SDK), and a Device Development Kit (DDK). I think the SDK comes with a lot of commercial compilers. I asked about the DDK for Windows 3.1 in 1993. It was over six hundred dollars. DDKs are the only place I know of where M$ bows to open source. IOW, they provide source code for exemplary device drivers. In the open source world, there is DOSbox, so one might be able to figure out how to patch some code from that into winfract for sound. Then again, if you will do that much, then you might as well patch in the code for making DOS sessions into an AVI, and the bit about recording OPL as a wav file, too. Okay...so now I do not know what I want the fractint team to work on, because DOSbox is basically a DOS extender, and there might be a lot of programs that someone might want to record. I am leaning towards linking to DOSbox on the FracTint web page, and if anyone wants to deliver FRACTINT on disk, DOSbox should be included. Oh, and cwsdpmi, too, because DOSbox does not do DPMI. Heh...just ran MSD under DOSbox. It supports XMS driver version 3.01, whereas cmd.exe only supports 2.77. Functionality over performance. _______ QUANDO OMNI FLUNKUS MORITATI (when all else fails, play dead)

1 0

Re: [Fractint] Arcade_Sound_Sampler.wmv
by Jay Litwyn 23 Feb '11

23 Feb '11

I said "1:24s at 536,398 kbps". Actually, that is bps. I believe that is about half the bandwidth on DSL, so realtime on DSL, if traffic allows. http://ecn.ab.ca/~brewhaha/finance/Arcade_Sound_Sampler.wmv I am not sure about DSL-light.

1 0

Autumn Lilypads
by Mike Frazier 22 Feb '11

22 Feb '11

Here is a link to a web page with an image: http://www.fracton.org/fmlposts/autumn_lilypads.html I used the Epicycloid_Mset formula to make this image. The thickness of the curve is adjusted to be so thick that the curve is filled in and turned into a "lily pad". The parameter file used to make this image is below: Autumn_Lilypads { ; Exported from Fracton. reset=2004 type=formula formulafile=fracton.frm formulaname=Epicycloid_Mset passes=1 float=y center-mag=-0.736775091553311/0.2424716796875001/1\ 33.333335/1/0/0 params=0.04/0.15/5/30/8/0.25/0/0/0/0 maxiter=500 inside=255 outside=summ colors=000fOz<28>I0Kz0f<28>O08z88<28>O00zW0<28>c40\ zz0<28>aG00zR<28>0C40zz<28>0CCGGz<28>00O000<12>000\ z88 } frm:Epicycloid_Mset { ; Epicycloid_Mset based on Astroid_Mset ; Astroid_Mset copyright (c) Paul W. Carlson, 1997 ; Epicycloid_Mset by Mike Frazier, 2011 ;**************************************************** ; Always use floating point math and outside=summ. ; ; Parameters: ; real(p1) = a factor controlling the width of the curves ; imag(p1) = radius of the curve ; real(p2) = number of color ranges ; imag(p2) = number of colors in each color range ; real(p3) = number of cusps, even integers ; imag(p3) = cusp amplitude (0 to 1) ; ; Note that the equation variable is w, not z. ; Initialize cindex to the index of the background color ; Formula modified to avoid color index 0 which can not ; be used with outside=summ in FractInt v20.04 ;**************************************************** w=0, c=pixel, z=0, cindex=254,; Background color bailout=0, iter=0, range_num=0, i=(0,1), r=imag(p1), f=real(p3)+1, b=imag(p3), ;**************************************************** ; In the accompanying par file, ; we have 8 color ranges with 30 colors in each range ; for a total of 240 colors. The first range starts at ; color 1. Pixels will use color 254 when |w| > 1000. ; Other values can be used here as long as the product ; of num_ranges times colors_in_range is less than 255. ; Color 254 is reserved for the background color and ; color 255 can be used for the inside color. ;**************************************************** num_ranges=real(p2), colors_in_range=imag(p2), ;**************************************************** ; Real(p1) controls the width of the curves. ; These values will usually be in the range 0.001 to 0.1 ;**************************************************** width=real(p1), index_factor=(colors_in_range-1)/width: ;**************************************************** ; The equation being iterated. Almost any equation ; that can be expressed in terms of a complex variable ; and a complex constant will work with this method. ; This example uses the standard Mandelbrot set equation. ;**************************************************** w=w*w+c, ;**************************************************** ; The orbit trap curve is an epicycloid. ; Any two-dimensional curve can ; be used which can be expressed in parametric form in ; terms of the angle from the origin. ;**************************************************** ang=atan(imag(w)/real(w)), astroid=r*(cos(ang)-b*cos(f*ang)+i*(sin(ang)-b*sin(f*ang))), ;**************************************************** ; If the orbit point is within some distance of the curve, ; set cindex to the index into the colormap and set the bailout ; flag. Note: the way we use the "distance" here has ; the effect of turning the curves inside-out in the image. ;**************************************************** distance=abs(|w|-|astroid|), if(distance<width&&iter>1), cindex=index_factor*distance+range_num*colors_in_range+1, bailout=1, endif, ;**************************************************** ; Cycle through the range numbers (0 thru num_ranges - 1) ; With two color ranges, even iterations use color ; range 0, odd iterations use color range 1. ;**************************************************** range_num=range_num+1, if(range_num==num_ranges), range_num=0, endif, ;**************************************************** ; Since we are using outside=summ, we have to subtract ; the number of iterations from z. ;**************************************************** iter=iter+1, z=cindex-iter, ;**************************************************** ; Finally, we test for bailout ;**************************************************** bailout==0&&|w|<1000 } -- Mike Frazier www.fracton.org

1 0

Astroid_Mset Part 4
by Mike Frazier 21 Feb '11

21 Feb '11

Below is a link to a webpage with images. http://www.fracton.org/fmlposts/astroid_mset_p4.html Astroid_Mset Part 4 - Changing the orbit trap curve In this installment we will change the orbit trap curve from an astroid to an epicycloid. An epicycloid is a circle with bumps on it. I rewrote the formula for an epicycloid so that you can enter the number of cusps and the amplitude of each cusp. These values are changeable in parameter p3 with the real(p3) = number of cusps and imag(p3) = cusp amplitude. The number of cusps should be an even number. If you make the cusp amplitude = 0 you get a circle for the curve. If you want to see the details of the code you can examine the parameter file below. If you are looking for a good source of curves to put in the formula you might try the book A Catalog of Special Plane Curves by J. Dennis Lawrence. It has hundreds of curves complete with illustrations and the parametric form that you need for this formula. I did run into a few issues that will limit the curves that you can use here. It appears that the distance calculation removes loops in the curve in addition to turning them inside out. It might be possible to overcome this limitation but it wasn't obvious to me how to do it. To make more interesting images it is usually better to have more overlap between the curves. To get that, you need a place where there are a lot of minbrots that are close together and all at nearly the same depth. One place where this occurs is in the arms of spirals as in the above image. I did a short animation of changing the number of cusps in the epicycloid. There is a Quicktime and a Flash version of the animation. Quicktime Movie 4.3 MB http://web.me.com/gigagraphica/fimage/epicycloid.mov Flash Animation 26.2 MB http://web.me.com/gigagraphica/fimage/epicycloid.swf This completes the things I tried with the Astroid_Mset. I hope other people get a chance to experiment with this great formula. The parameter file for the image is below: Epicycloid { ; Exported from Fracton. reset=2004 type=formula formulafile=fracton.frm formulaname=Epicycloid_Mset passes=1 float=y center-mag=-0.727258489990811/0.2427890625/189.629\ 632/1/0/0 params=0.02/0.25/8/30/8/0.25/0/0/0/0 maxiter=500 inside=255 outside=summ colors=000fOz<28>I0Kz0f<28>O08z88<28>O00zW0<28>c40\ zz0<28>aG00zR<28>0C40zz<28>0CCGGz<28>00O000<12>000\ z88 } frm:Epicycloid_Mset { ; Epicycloid_Mset based on Astroid_Mset ; Astroid_Mset copyright (c) Paul W. Carlson, 1997 ; Epicycloid_Mset by Mike Frazier, 2011 ;**************************************************** ; Always use floating point math and outside=summ. ; ; Parameters: ; real(p1) = a factor controlling the width of the curves ; imag(p1) = radius of the curve ; real(p2) = number of color ranges ; imag(p2) = number of colors in each color range ; real(p3) = number of cusps, even integers ; imag(p3) = cusp amplitude (0 to 1) ; ; Note that the equation variable is w, not z. ; Initialize cindex to the index of the background color ; Formula modified to avoid color index 0 which can not ; be used with outside=summ in FractInt v20.04 ;**************************************************** w=0, c=pixel, z=0, cindex=254,; Background color bailout=0, iter=0, range_num=0, i=(0,1), r=imag(p1), f=real(p3)+1, b=imag(p3), ;**************************************************** ; In the accompanying par file, ; we have 8 color ranges with 30 colors in each range ; for a total of 240 colors. The first range starts at ; color 1. Pixels will use color 254 when |w| > 1000. ; Other values can be used here as long as the product ; of num_ranges times colors_in_range is less than 255. ; Color 254 is reserved for the background color and ; color 255 can be used for the inside color. ;**************************************************** num_ranges=real(p2), colors_in_range=imag(p2), ;**************************************************** ; Real(p1) controls the width of the curves. ; These values will usually be in the range 0.001 to 0.1 ;**************************************************** width=real(p1), index_factor=(colors_in_range-1)/width: ;**************************************************** ; The equation being iterated. Almost any equation ; that can be expressed in terms of a complex variable ; and a complex constant will work with this method. ; This example uses the standard Mandelbrot set equation. ;**************************************************** w=w*w+c, ;**************************************************** ; The orbit trap curve is an epicycloid. ; Any two-dimensional curve can ; be used which can be expressed in parametric form in ; terms of the angle from the origin. ;**************************************************** ang=atan(imag(w)/real(w)), astroid=r*(cos(ang)-b*cos(f*ang)+i*(sin(ang)-b*sin(f*ang))), ;**************************************************** ; If the orbit point is within some distance of the curve, ; set cindex to the index into the colormap and set the bailout ; flag. Note: the way we use the "distance" here has ; the effect of turning the curves inside-out in the image. ;**************************************************** distance=abs(|w|-|astroid|), if(distance<width&&iter>1), cindex=index_factor*distance+range_num*colors_in_range+1, bailout=1, endif, ;**************************************************** ; Cycle through the range numbers (0 thru num_ranges - 1) ; With two color ranges, even iterations use color ; range 0, odd iterations use color range 1. ;**************************************************** range_num=range_num+1, if(range_num==num_ranges), range_num=0, endif, ;**************************************************** ; Since we are using outside=summ, we have to subtract ; the number of iterations from z. ;**************************************************** iter=iter+1, z=cindex-iter, ;**************************************************** ; Finally, we test for bailout ;**************************************************** bailout==0&&|w|<1000 } -- Mike Frazier www.fracton.org

2 1

Fractint for Windows
by Brian Prentice 21 Feb '11

21 Feb '11

I've just noticed that Hal Lane uses "Fractint for Windows beta 5" to publish Jim Muth's FOTD. Does this program run under Windows 7? Can the size of the control window be changed or set to full screen mode? Brian Prentice

2 3