Total control chassis
My company has reduced the amount of dialup equipment that we need and we have 4 Total Control units we are not planning on using again. Please e-mail me if you have a need or desire for a TC unit. We've kept all of the Hiper DSP's out of them for obvious reasons, but I'll give you more details if you are interested. We are not looking to make a profit off of these TC's just offload them to someone else. I'll give more details about them to anyone interested. Thanks, Gerald
I have an ip conflict somewhere on my network, and I have to find out what the MAC addresses are on my TC. I can't get to the unit via TCM, only telnet. Can anyone tell me how to find this out. We're down until I find and fix the IP conflict. Thanks. Seth 707-678-0267
Can you telnet into a cisco and do a "show arp" or into another box? Bill Dunn Network Admin/Tech Support VCI Internet Services (270) 442-0060 or (800) 755-1239 Office hours: Mon - Fri 8am to 9pm Sat 9am to 5pm Sun Closed ----- Original Message ----- From: "Seth Jacobs" <sjacobs@onramp113.com> To: "Discussion relating to the 3Com/US Robotics Total Control modemsystems." <usr-tc@mailman.xmission.com> Sent: Monday, April 21, 2003 1:59 PM Subject: [USR-TC] Help! I have an ip conflict somewhere on my network, and I have to find out what the MAC addresses are on my TC. I can't get to the unit via TCM, only telnet. Can anyone tell me how to find this out. We're down until I find and fix the IP conflict. Thanks. Seth 707-678-0267 _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Bill, Thanks. We were able to track it down and fix it. Thanks for responding. Also thanks to Shannon. Much appreciated! Seth ----- Original Message ----- From: "VCI Help Desk" <admin@vci.net> To: "Discussion relating to the 3Com/US Robotics Total Control modemsystems." <usr-tc@mailman.xmission.com> Sent: Monday, April 21, 2003 12:07 PM Subject: Re: [USR-TC] Help!
Can you telnet into a cisco and do a "show arp" or into another box?
Bill Dunn Network Admin/Tech Support VCI Internet Services (270) 442-0060 or (800) 755-1239
Office hours: Mon - Fri 8am to 9pm Sat 9am to 5pm Sun Closed
----- Original Message ----- From: "Seth Jacobs" <sjacobs@onramp113.com> To: "Discussion relating to the 3Com/US Robotics Total Control modemsystems." <usr-tc@mailman.xmission.com> Sent: Monday, April 21, 2003 1:59 PM Subject: [USR-TC] Help!
I have an ip conflict somewhere on my network, and I have to find out what the MAC addresses are on my TC. I can't get to the unit via TCM, only telnet. Can anyone tell me how to find this out. We're down until I find and fix the IP conflict.
Thanks.
Seth 707-678-0267
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (3)
-
Gerald -
Seth Jacobs -
VCI Help Desk