On Monday 29 July 2002 08:48 am, you wrote:

By default the HiPer arc is set to 115200 baud rate. So try that setting first, next you have a dip switch 5 on the ARC, enable it or set it to On position that helps with programs that require DTR.

I checked the dip switches and they both are set to 9600, But I'll double check(again). I'll check number 5. Here is what I get from show board settings. By the way, I have tried 115200 just in case and it still doesn't work. HiPer>> shoW boaRD seTTINGS Product Code: 323842 Hardware Version: 3.0.2 Kernel Version: 0x0000002d Software Version: V5.3.2/Non-Encr Serial Number: B3IAJRFD Feature Key: 00000000 Total System Dynamic Memory:128 MB Total System Flash Memory: 16 MB CPU Type: PPC 603ev CPU Speed(Mhz): 200 NIC Card ID: 19 NIC Card Name: Dual DEC42 10/100 Ethernet NAC Card ID: 48 NAC Card Name: HiPer Access Router NAC DIP Switch Settings: 1 2 3 4 5 6 7 8 9 10 --- --- --- --- --- --- --- --- --- --- OFF OFF OFF OFF OFF OFF OFF OFF XXX OFF SW 1-2: UI baud rate: 9600 SW 3: Engineering Fastboot: DISABLED SW 4: Autoload application: ENABLED SW 5: UI Require Carrier: ENABLED SW 6: L1 Data Cache: ENABLED SW 7: L1 Instruction Cache: ENABLED SW 8: L2 Cache: ENABLED SW 9: Eng. Watchdog Disable: (CANNOT BE READ) SW 10: Manufacturing Test: DISABLED -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115