Hey guys, I've been lurking for a long time and using much of the advice that pertained to similar problems i had with my TC equipment. I've seen a lot of good talk about the 2.0.51 software and everyone seems to be happy with it. Has anyone had any trouble with it? I loaded 2.0.51 and 2.0.60 onto one chassis and have been having trouble with 2.0.51 making trunks go "local out of service". The cards with 2.0.60 are working well. I tried loading 2.0.60 into the cards with the .55 hardware but that caused different problems (mostly instant disconnects). Loading 2.0.81 makes the cards not answer calls at all. These are five new HiperDSP cards purchased in December and just installed. I find it hard to believe that i would get 5 bad DSP cards (I guess it's possible) Has anyone else had this type of problem with 2.0.51? BTW: I have two more chassis and experienced the same problem with the existing cards. I reverted back to 2.0.81 and all worked well again. Thanks for any info Rudy Ferguson VstaNet 1 3COM High-Density 24 Channel 1OQ 0.53.0 8192 2048 2.0.60 2 3COM High-Density 24 Channel 1OQ 0.53.0 8192 2048 2.0.60 3 3COM High-Density 24 Channel 1OQ 0.51.0 8192 2048 2.0.60 4 3COM High-Density 24 Channel 1OQ 0.49.0 8192 2048 2.0.60 5 3COM High-Density 24 Channel 1OQ 0.53.0 8192 2048 2.0.60 6 3COM High-Density 24 Channel 1OQ 0.55.0 8192 2048 2.0.51 7 3COM High-Density 24 Channel 1OQ 0.55.0 8192 2048 2.0.51 8 3COM High-Density 24 Channel 1OQ 0.55.0 8192 2048 2.0.51 9 3COM High-Density 24 Channel 3C4 0.49.0 8192 2048 2.0.60 10 3COM High-Density 24 Channel 1OQ 0.55.0 8192 2048 2.0.51 16 3COM HiPer ARC NAC 28B 19.0.0 131072 16384 4.2.32 17 3COM Network Management Card with clock 2DY00000 7.0 16384 8192 6.1.17 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
From what I understand from the release notes is that .51 software is for a specific chipset problem. No new features were added as far as fixes... from the release notes anyway.... we did notice a pretty good drop in the amount of disconnects in the 0-3 minute range.
Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 On Wed, 2 Feb 2000 cygnus@vsta.com wrote:
Hey guys, I've been lurking for a long time and using much of the advice that pertained to similar problems i had with my TC equipment. I've seen a lot of good talk about the 2.0.51 software and everyone seems to be happy with it. Has anyone had any trouble with it? I loaded 2.0.51 and 2.0.60 onto one chassis and have been having trouble with 2.0.51 making trunks go "local out of service". The cards with 2.0.60 are working well. I tried loading 2.0.60 into the cards with the .55 hardware but that caused different problems (mostly instant disconnects). Loading 2.0.81 makes the cards not answer calls at all. These are five new HiperDSP cards purchased in December and just installed. I find it hard to believe that i would get 5 bad DSP cards (I guess it's possible) Has anyone else had this type of problem with 2.0.51?
BTW: I have two more chassis and experienced the same problem with the existing cards. I reverted back to 2.0.81 and all worked well again.
Thanks for any info Rudy Ferguson VstaNet
1 3COM High-Density 24 Channel 1OQ 0.53.0 8192 2048 2.0.60 2 3COM High-Density 24 Channel 1OQ 0.53.0 8192 2048 2.0.60 3 3COM High-Density 24 Channel 1OQ 0.51.0 8192 2048 2.0.60 4 3COM High-Density 24 Channel 1OQ 0.49.0 8192 2048 2.0.60 5 3COM High-Density 24 Channel 1OQ 0.53.0 8192 2048 2.0.60 6 3COM High-Density 24 Channel 1OQ 0.55.0 8192 2048 2.0.51 7 3COM High-Density 24 Channel 1OQ 0.55.0 8192 2048 2.0.51 8 3COM High-Density 24 Channel 1OQ 0.55.0 8192 2048 2.0.51 9 3COM High-Density 24 Channel 3C4 0.49.0 8192 2048 2.0.60 10 3COM High-Density 24 Channel 1OQ 0.55.0 8192 2048 2.0.51 16 3COM HiPer ARC NAC 28B 19.0.0 131072 16384 4.2.32 17 3COM Network Management Card with clock 2DY00000 7.0 16384 8192 6.1.17
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
cygnus＠vsta.com -
Paul Farber