According to the release notes yes.
After reviewing the system release notes, TCM is no longer compatible. CEM must be used to manage this new TCS version. -- Adam Barnhill Support Engineer, TotallyFabricated.com Information Technology Engineer, Poplar Bluff Internet, Inc. / Semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114, <http://www.semo.net/> Home of TotallyFabricated.com the creators of Total Scrutinizer
Hopefully someone can point me in the right direction before I start breaking things around me ;-) I'm trying to setup a hiper arc so that you can telnet into it via some other socket then 23 and attach to 1 or more modems on a dsp in that chassis to use for dialout. I've done this before without issues so I'm a bit perplexed as to what the problem is. After making the necessary config entries I telnet to my arc port 6002 and whether I specify auth=yes or auth=no I get this from my telnet facility: Facility "Telnet", Level "UNUSUAL":: CIP_GET_SHARED_DEV_REQ failed: ((bad status)) 0x43495071) The only thing I can think of from my research is that the modem group I specified is not available...but it is. Todd
Nevermind...figured it out. Todd -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Todd Bertolozzi Sent: Thursday, November 14, 2002 3:39 PM To: usr-tc@mailman.xmission.com Subject: RE: [USR-TC] Dialout from Hiper Arc / DSP Hopefully someone can point me in the right direction before I start breaking things around me ;-) I'm trying to setup a hiper arc so that you can telnet into it via some other socket then 23 and attach to 1 or more modems on a dsp in that chassis to use for dialout. I've done this before without issues so I'm a bit perplexed as to what the problem is. After making the necessary config entries I telnet to my arc port 6002 and whether I specify auth=yes or auth=no I get this from my telnet facility: Facility "Telnet", Level "UNUSUAL":: CIP_GET_SHARED_DEV_REQ failed: ((bad status)) 0x43495071) The only thing I can think of from my research is that the modem group I specified is not available...but it is. Todd _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (2)
-
Adam Barnhill -
Todd Bertolozzi