Re: (usr-tc) Ah...what the heck...
Is it possible to restrict access to a subnet or subnets such that any machine on that subnet can access TCM?
Yes, You are allowed up to ten entries, each containing an IP address and a network mask. If you mess up putting in the restrictions and can't get in from snmp/TCM anymore, you can reset the list from the NMC Console port with Command | ReinitializeAccessList, or just reboot the NMC if you'd like, since you hadn't saved the config yet. STeve mmm3@cornell.edu on 10/14/99 04:00:34 PM Please respond to usr-tc@lists.xmission.com Sent by: mmm3@cornell.edu To: usr-tc@lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: Re: (usr-tc) Ah...what the heck...
The NMC DOES have an Authorized Stations list, in which you can limit snmp access to a given set of ip addresses. It would be probably be a good idea to use it. WIthin TCM its uner Security | Authorized Stations.
STeve
Is it possible to restrict access to a subnet or subnets such that any machine on that subnet can access TCM? ********************************************************* Michelle M. Mogil Network and Computing Systems 721 Rhodes Hall, Cornell University, Ithaca, NY 14853 vox: (607) 255-0516, fax: (607) 255-8420 email: mmm3@cornell.edu ********************************************** - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Is it possible to restrict access to a subnet or subnets such that any machine on that subnet can access TCM?
Yes, You are allowed up to ten entries, each containing an IP address and a network mask.
Right, but I was under the impression the IP address had to be of a specific node machine, not set to--for example--128.253.180.0/24 so that *any* machine, regardless of node address, could access TCM from that subNet. Or am I being dense here?
If you mess up putting in the restrictions and can't get in from snmp/TCM anymore, you can reset the list from the NMC Console port with Command | ReinitializeAccessList, or just reboot the NMC if you'd like, since you hadn't saved the config yet.
Oh, I *never* mess up. 8-) ********************************************************* Michelle M. Mogil Network and Computing Systems 721 Rhodes Hall, Cornell University, Ithaca, NY 14853 vox: (607) 255-0516, fax: (607) 255-8420 email: mmm3@cornell.edu ********************************************** - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
mmm3＠cornell.edu -
Steve Valiunas