You might be using an older NMC version. You need 6.x NMC code. Steve Valiunas Jorge Lozano <jorge@andinet.com> on 01/05/2000 10:26:28 AM Please respond to usr-tc@lists.xmission.com Sent by: Jorge Lozano <jorge@andinet.com> To: usr-tc@xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) Problems with TCM! Hi again... I have a TCM 6.0.23 and 6.0.86, I am trying congifure the Hiper DSP cards (2.0.19), but then... I have an error message from TCM. The following lines are the message: Error Opening Device Description File Configuration not supported Initiation failed anybody know what is the problem?????? sincerely, Jorge Lozano ------------------------------------------------ Este mensaje fue enviado usando Andinet WebMail. http://www.andinet.com/ - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.