Re: (usr-tc) Suggested Firmware
At 01:36 PM 4/17/00 -0400, Mike Andrews wrote:
No, you should be running 2.0.51 on the DSP's for that...
How does 2.0.51 work with 0.49 hardware? -- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
It works, but we have noticed higher disconnects and failed handshakes with these two.......2.0.51 and 0.53 and above works great........ Mark ----- Original Message ----- From: "K Mitchell" <mitch@keyconn.net> To: <usr-tc@lists.xmission.com> Sent: Monday, April 17, 2000 1:52 PM Subject: Re: (usr-tc) Suggested Firmware
At 01:36 PM 4/17/00 -0400, Mike Andrews wrote:
No, you should be running 2.0.51 on the DSP's for that...
How does 2.0.51 work with 0.49 hardware?
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Works fine here. It's not *just* for 0.55 hardware. Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, Shelbyville www.fark.com: If it's not news, it's Fark. (Or something like that.) On Mon, 17 Apr 2000, K Mitchell wrote:
At 01:36 PM 4/17/00 -0400, Mike Andrews wrote:
No, you should be running 2.0.51 on the DSP's for that...
How does 2.0.51 work with 0.49 hardware?
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Hello, We have a few TC Hubs and over the past week each hub has bugged out on us. The hub looks normal and accepts calls, but the user gets an error 690 I think it is right away saying unable to connect and when I try to telnet to the hub I get refused telnet right away. The change I made in the last few weeks was a new Radius server, so I am cross posting this to that list also. Any advice?? Thanks, Mark Green Apple Inc - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
have you checked the radius and accounting secrets and addresses? Same problem hit us once. That fixed it. Ted Mecimore Operations Manager Vista Technology 108 Meeting Street Morganton, NC 28655 "Duct tape is like the force. It has a light side, a dark side, and holds the universe together." -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Mark S - Squid Manager Sent: Tuesday, April 18, 2000 4:34 PM To: usr-tc@lists.xmission.com Cc: vopradius@vircom.com Subject: (usr-tc) Help..... Hello, We have a few TC Hubs and over the past week each hub has bugged out on us. The hub looks normal and accepts calls, but the user gets an error 690 I think it is right away saying unable to connect and when I try to telnet to the hub I get refused telnet right away. The change I made in the last few weeks was a new Radius server, so I am cross posting this to that list also. Any advice?? Thanks, Mark Green Apple Inc - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
If you cant telnet to the box, can you get in via console cable? This is a bad situtation. Did you add anything to the Radius attributes? On Tue, 18 Apr 2000, Mark S - Squid Manager wrote:
Hello, We have a few TC Hubs and over the past week each hub has bugged out on us. The hub looks normal and accepts calls, but the user gets an error 690 I think it is right away saying unable to connect and when I try to telnet to the hub I get refused telnet right away. The change I made in the last few weeks was a new Radius server, so I am cross posting this to that list also. Any advice?? Thanks, Mark Green Apple Inc
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- mike@wronski.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (5)
-
K Mitchell -
Mark S - Squid Manager -
Mike -
Mike Andrews -
Ted Mecimore