(usr-tc) X2 Key still necessary
Hi everybody I would like to upgrade a Netserver/Quadmodem based Chasis to V.90. When I did this last year I had to buy a X2 enable key. This product is no longer available. So the question I have: Is this key still necessary? Or do I just upgrade the Quadmodems to the latest code and then I have V.90 automatically enabled? Ralph -- ========================================================================== R. Helfenberger Internet r.helfenberger@comlight.ch Comlight AG Tel +41 31 740 40 40 Industriestr. 17 Fax +41 31 740 40 90 3178 Boesingen Switzerland www.comlight.ch ========================================================================== - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
According to Source Technologies and Westcon the X2 key is still available. However there is a 2 week lead time and the cost about $1000. Based on how the refurbished market is today it is much more economical to buy refurbished v90 NMC card (bought 3 yesterday for $200ea). At 11:38 AM 12/07/1999 +0100, you wrote:
Hi everybody I would like to upgrade a Netserver/Quadmodem based Chasis to V.90. When I did this last year I had to buy a X2 enable key. This product is no longer available. So the question I have: Is this key still necessary? Or do I just upgrade the Quadmodems to the latest code and then I have V.90 automatically enabled?
Ralph
-- ========================================================================== R. Helfenberger Internet r.helfenberger@comlight.ch Comlight AG Tel +41 31 740 40 40 Industriestr. 17 Fax +41 31 740 40 90 3178 Boesingen Switzerland www.comlight.ch ==========================================================================
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
I thought the X2 key was only required for X2 and not for V.90 ? Jeff Binkley ASA Network Computing U>According to Source Technologies and Westcon the X2 key is still U>available. However there is a 2 week lead time and the cost about U>$1000. Based on how the refurbished market is today it is much more U>economical to buy refurbished v90 NMC card (bought 3 yesterday for U>$200ea). U>At 11:38 AM 12/07/1999 +0100, you wrote: U>>Hi everybody U>>I would like to upgrade a Netserver/Quadmodem based Chasis to V.90. U>>I When did this last year I had to buy a X2 enable key. This product U>is no >longer available. So the question I have: Is this key still U>necessary? >Or do I just upgrade the Quadmodems to the latest code and U>then I have >V.90 automatically enabled? U>> U>>Ralph U>> U>>-- U>>===================================================================== U>===== >R. Helfenberger Internet U>r.helfenberger@comlight.ch >Comlight AG Tel +41 31 U>740 40 40 >Industriestr. 17 Fax +41 31 740 40 90 U>>3178 Boesingen U>>Switzerland www.comlight.ch U>>===================================================================== U>===== > U>>- U>> To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" U>> with "unsubscribe usr-tc" in the body of the message. U>> For information on digests or retrieving files and old messages U>> send "help" to the same address. Do not use quotes in your U>> message. U>- U> To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" U> with "unsubscribe usr-tc" in the body of the message. U> For information on digests or retrieving files and old messages send U> "help" to the same address. Do not use quotes in your message. CMPQwk 1.42 9999 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
We seem to be having a problem saving settings on our HiPer DSP cards using TCM (we think). When we set the switch type and reset the card it would revert back to the default setting (5ESS). When the 3Com tech set it, it stayed? Also the cause codes, timeslot mapping and blocking, and timeslot service configurations are not taking. We set them, save the settings to NVRAM, and reset the card and all the settings revert, BUT, when we restore from nvram all the settings get the correct values? Any ideas would be appreciated. We are running 4.1.59 on the ARC and 2.0.81 on the DSPs. The NMC is running 5.6.2. This is a new chassis. Samuel S. Lowe Director, Data Services UniversalCom, Inc. slowe@universalcom.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
I would first upgrade the NMC to 6.2.17 (TCS 3.5 and 3.6) and see if that fixes the problem. Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Sam Lowe Sent: Wednesday, December 08, 1999 8:07 AM To: usr-tc@lists.xmission.com Subject: (usr-tc) TCM 6.023
We seem to be having a problem saving settings on our HiPer DSP cards using TCM (we think).
When we set the switch type and reset the card it would revert back to the default setting (5ESS). When the 3Com tech set it, it stayed?
Also the cause codes, timeslot mapping and blocking, and timeslot service configurations are not taking. We set them, save the settings to NVRAM, and reset the card and all the settings revert, BUT, when we restore from nvram all the settings get the correct values?
Any ideas would be appreciated. We are running 4.1.59 on the ARC and 2.0.81 on the DSPs. The NMC is running 5.6.2. This is a new chassis.
Samuel S. Lowe Director, Data Services UniversalCom, Inc. slowe@universalcom.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
The X2 key is required to turn on both X2 and v.90 in a quad modem rack. Wayne Barber Coastal Telco Services
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jeff Binkley Sent: Wednesday, December 08, 1999 8:41 AM To: USR-TC@lists.xmission.com Subject: (usr-tc) RE: (USR-TC) X2 KEY STILL
I thought the X2 key was only required for X2 and not for V.90 ?
Jeff Binkley ASA Network Computing
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (6)
-
jeff.binkleyļ¼ asacomp.com -
Marshall Morgan -
Ralph Helfenberger -
Sam Lowe -
Steve Rivera -
Wayne Barber