Quoting Gen Camiling <gcamiling@imvi.com.ph>:

Hi there,

im upgrading code for hiperdsp, downloading was succesful but upon boot-up of the card this is what i got:

Flash Image Has Valid CRC, Loading Image....

Diagnostic Power-Up Failure

Manufacturing Info -> 1AAA13M0 Mode/Env -> 1/0 Fault Code -> 0-8-25-1 Expected Data -> f005400c Received Data -> f0054004 Text Message -> Address Equals Data Test Failure Info Message -> Second read failed. Hard error indicated.

Questions: 1. If the Flash gets corrupted and you tried re-flashing and still card does not come up, is there a way to salvage the card or is it good as hardware failure (dead)?

Youp, Your DSP is Dead, cause Me Too :-( Rgds, -ts-

2. Is there a list/link/copy where we can interpret such fault code like the one stated above?

-- Best regards, Gen

=================================== Gener R. Camiling Chief Technical Officer International Micro Village, Inc. http://www.imvi.com.ph ===================================

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc