http://www.farmpride.com/ispstuff1.html http://support.3com.com/software/smofficesw.htm http://support.3com.com/rapd/mpdocs.html start off with bottom row of dips, all up, you may need or not need dip 3 down to force the 9600 baud rate, then set terminal program (hyperterminal) to com port that your hooked to and also for 9600 and no flow control, and rest auto. also what cable are you using? Albert Zegiel FarmPride Products 223 Main Street Gays Mills Wisconsin 54631 ph/608-735-4667 ------------------------------------- -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of NETSERVER /16 V.34 Sent: Thursday, January 31, 2002 4:58 AM To: usr-tc@mailman.xmission.com Subject: [USR-TC] NetServer/16 v.34 /Getting Started Dear lists, I just got a refurbished TC Netserver/16 V.34. I tried to start with console but i don't get any start screen here. what will be correct DIP switch or other settings to start with this things. THanks in Advance. ~Russell