My hyperarc has an aui port and a 10bast-t how do I force it to NOT use tha aui ? Thanks Geoffrey Geoffrey Deasey VP Systems Netpath, Inc. (336) 226-0425 www.netpath.net Alvarion certified wireless network engineer
I don't ever recall seeing a HiperArc with an aui port. Are you sure you're not speaking of a NMC card or maybe a netserver card?? Any dipswitches on the card? I would take a guess and say if there are any they are responsible for which port is active on the back of the card. Todd ----- Original Message ----- From: "Geoffrey Deasey" <deasey@netpath.net> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, January 05, 2005 10:31 AM Subject: [USR-TC] hyperarc ethernet port
My hyperarc has an aui port and a 10bast-t how do I force it to NOT use tha aui ?
Thanks
Geoffrey
Geoffrey Deasey VP Systems Netpath, Inc. (336) 226-0425 www.netpath.net Alvarion certified wireless network engineer
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Hi all I recently got a 3com TC 1000, I am looking for 3com HiPer Access Router Manager (HARM) software, could you please help. I have been searching desperately all over can seem to find it anywhere except for utstar.com, who won't let me download it Thanks in advance Gerald.
Hi, I'm also looking for the software for a long time, can you inform if you find it too, thanks Richard ----- Original Message ----- From: "Gerald Jaya" <gerry@zol.co.zw> To: "'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.'" <usr-tc@mailman.xmission.com> Sent: Monday, January 10, 2005 6:21 PM Subject: [USR-TC] 3com HiPer Access Router Manager (HARM)
Hi all
I recently got a 3com TC 1000, I am looking for 3com HiPer Access Router Manager (HARM) software, could you please help. I have been searching desperately all over can seem to find it anywhere except for utstar.com, who won't let me download it
Thanks in advance
Gerald.
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
IMHO you are better off learning the CLI commands. HARM, despite it's revision numbers, was never a reliable piece of software. Changing one thing would sometimes make changes elsewhere. It's also not compatible with the latest versions of the HiperARC firmware. On 10 Jan 2005 at 18:35, Richard S. Dy wrote:
Hi,
I'm also looking for the software for a long time, can you inform if you find it too, thanks
Richard
----- Original Message ----- From: "Gerald Jaya" <gerry@zol.co.zw> To: "'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.'" <usr-tc@mailman.xmission.com> Sent: Monday, January 10, 2005 6:21 PM Subject: [USR-TC] 3com HiPer Access Router Manager (HARM)
Hi all
I recently got a 3com TC 1000, I am looking for 3com HiPer Access Router Manager (HARM) software, could you please help. I have been searching desperately all over can seem to find it anywhere except for utstar.com, who won't let me download it
Thanks in advance
Gerald.
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Wayne Barber IS Supervisor Coastal Telco Services Voice: (207) 563-9929 Fax: (207) 563-9939
Thanks for the advice, I am actually more comfy with using the CLI, my problem is I have no CLI command reference, can you help on that one also Gerald -----Original Message----- From: usr-tc-bounces+gerry=zol.co.zw@mailman.xmission.com [mailto:usr-tc-bounces+gerry=zol.co.zw@mailman.xmission.com] On Behalf Of Wayne Barber Sent: 10 January 2005 15:19 To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] 3com HiPer Access Router Manager (HARM) IMHO you are better off learning the CLI commands. HARM, despite it's revision numbers, was never a reliable piece of software. Changing one thing would sometimes make changes elsewhere. It's also not compatible with the latest versions of the HiperARC firmware. On 10 Jan 2005 at 18:35, Richard S. Dy wrote:
Hi,
I'm also looking for the software for a long time, can you inform if you find it too, thanks
Richard
----- Original Message ----- From: "Gerald Jaya" <gerry@zol.co.zw> To: "'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.'" <usr-tc@mailman.xmission.com> Sent: Monday, January 10, 2005 6:21 PM Subject: [USR-TC] 3com HiPer Access Router Manager (HARM)
Hi all
I recently got a 3com TC 1000, I am looking for 3com HiPer Access Router Manager (HARM) software, could you please help. I have been searching desperately all over can seem to find it anywhere except for utstar.com,
who won't let me download it
Thanks in advance
Gerald.
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Wayne Barber IS Supervisor Coastal Telco Services Voice: (207) 563-9929 Fax: (207) 563-9939 _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Gerald Jaya wrote:
Thanks for the advice, I am actually more comfy with using the CLI, my problem is I have no CLI command reference, can you help on that one also
You should find all the reference you need here. http://support.utstar.com/ -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 325-691-3301 800-299-6962
I got 4 E1 card sets with a chassis I bought, and I'm still looking for 333 NMC or Edgeserver ES cards. I'd prefer a swap, but I'd be happy to sell the cards too.
Sorry I meant NMC Geoffrey At 10:31 AM 1/5/2005, you wrote:
My hyperarc has an aui port and a 10bast-t how do I force it to NOT use tha aui ?
Thanks
Geoffrey
Geoffrey Deasey VP Systems Netpath, Inc. (336) 226-0425 www.netpath.net Alvarion certified wireless network engineer
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Geoffrey Deasey VP Systems Netpath, Inc. (336) 226-0425 www.netpath.net Alvarion certified wireless network engineer
participants (7)
-
Aaron Nabil -
Geoffrey Deasey -
Gerald Jaya -
Lewis Bergman -
Richard S. Dy -
Todd Bertolozzi -
Wayne Barber