Re: (usr-tc) static to dynamic
If you have setup a chassis in which you have programed a slot to be static and save that configuration, once done it will remain static unless and untill removed manually. For your ports to be dynamic, here is what you need to do First remove the port from static configuration Then enable nmc chassis awarenss. When you do a sh nmc you will see three options in there nmc chassis awarness DSA DSA Idle rebla if you have only one hiper arc in the chassis then enable nmc chassis awarness and disable the other two. If you have more than one hyper arc and want to maintain dynamic configuration then enable all three. If you have two hiper arcs and you want to make static configurations disable all the three in nmc chassis awarness and then reboot the card. krish On Wed, 26 Jan 2000, David Swearingin wrote:
You wrote:
From: D A Substanley <das@gol.com> To: usr-tc@lists.xmission.com Date: Thu, 27 Jan 2000 12:33:12 +0900 Subject: Re: (usr-tc) static to dynamic
Enable nmc chassis awareness
das
Didn't work for me.
David
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Good information, thanks Krish. One question, how do you remove the port from static configuration. das Tatai SV Krishnan (tkrishna@bubba.ae.usr.com) spake:
If you have setup a chassis in which you have programed a slot to be static and save that configuration, once done it will remain static unless and untill removed manually.
For your ports to be dynamic, here is what you need to do
First remove the port from static configuration Then enable nmc chassis awarenss. When you do a sh nmc you will see three options in there
nmc chassis awarness DSA DSA Idle rebla
if you have only one hiper arc in the chassis then enable nmc chassis awarness and disable the other two.
If you have more than one hyper arc and want to maintain dynamic configuration then enable all three.
If you have two hiper arcs and you want to make static configurations disable all the three in nmc chassis awarness
and then reboot the card.
krish
On Wed, 26 Jan 2000, David Swearingin wrote:
You wrote:
From: D A Substanley <das@gol.com> To: usr-tc@lists.xmission.com Date: Thu, 27 Jan 2000 12:33:12 +0900 Subject: Re: (usr-tc) static to dynamic
Enable nmc chassis awareness
das
Didn't work for me.
David
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-- ______________________________________________ Alex Substanley Exodus Communications K.K. Engineering Department Das Man TEL: 81-3-5334-1700 Systems Engineer FAX: 81-3-5334-1711 ______________________________________________ - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Well in order to remove it from static configuration you have set the owner of that slot as no - Basically say if you have slot 1 configured as static then you would issue set chass slot 1 o n enable nmc chas save all reboot krish On Thu, 27 Jan 2000, D A Substanley wrote:
Good information, thanks Krish. One question, how do you remove the port from static configuration.
das
Tatai SV Krishnan (tkrishna@bubba.ae.usr.com) spake:
If you have setup a chassis in which you have programed a slot to be static and save that configuration, once done it will remain static unless and untill removed manually.
For your ports to be dynamic, here is what you need to do
First remove the port from static configuration Then enable nmc chassis awarenss. When you do a sh nmc you will see three options in there
nmc chassis awarness DSA DSA Idle rebla
if you have only one hiper arc in the chassis then enable nmc chassis awarness and disable the other two.
If you have more than one hyper arc and want to maintain dynamic configuration then enable all three.
If you have two hiper arcs and you want to make static configurations disable all the three in nmc chassis awarness
and then reboot the card.
krish
On Wed, 26 Jan 2000, David Swearingin wrote:
You wrote:
From: D A Substanley <das@gol.com> To: usr-tc@lists.xmission.com Date: Thu, 27 Jan 2000 12:33:12 +0900 Subject: Re: (usr-tc) static to dynamic
Enable nmc chassis awareness
das
Didn't work for me.
David
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-- ______________________________________________ Alex Substanley Exodus Communications K.K. Engineering Department Das Man TEL: 81-3-5334-1700 Systems Engineer FAX: 81-3-5334-1711 ______________________________________________
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Great, thanks! das Tatai SV Krishnan (tkrishna@bubba.ae.usr.com) spake:
Well in order to remove it from static configuration you have set the owner of that slot as no - Basically say if you have slot 1 configured as static then you would issue
set chass slot 1 o n
enable nmc chas save all reboot
krish
On Thu, 27 Jan 2000, D A Substanley wrote:
Good information, thanks Krish. One question, how do you remove the port from static configuration.
das
Tatai SV Krishnan (tkrishna@bubba.ae.usr.com) spake:
If you have setup a chassis in which you have programed a slot to be static and save that configuration, once done it will remain static unless and untill removed manually.
For your ports to be dynamic, here is what you need to do
First remove the port from static configuration Then enable nmc chassis awarenss. When you do a sh nmc you will see three options in there
nmc chassis awarness DSA DSA Idle rebla
if you have only one hiper arc in the chassis then enable nmc chassis awarness and disable the other two.
If you have more than one hyper arc and want to maintain dynamic configuration then enable all three.
If you have two hiper arcs and you want to make static configurations disable all the three in nmc chassis awarness
and then reboot the card.
krish
On Wed, 26 Jan 2000, David Swearingin wrote:
You wrote:
From: D A Substanley <das@gol.com> To: usr-tc@lists.xmission.com Date: Thu, 27 Jan 2000 12:33:12 +0900 Subject: Re: (usr-tc) static to dynamic
Enable nmc chassis awareness
das
Didn't work for me.
David
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-- ______________________________________________ Alex Substanley Exodus Communications K.K. Engineering Department Das Man TEL: 81-3-5334-1700 Systems Engineer FAX: 81-3-5334-1711 ______________________________________________
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-- ______________________________________________ Alex Substanley Exodus Communications K.K. Engineering Department Das Man TEL: 81-3-5334-1700 Systems Engineer FAX: 81-3-5334-1711 ______________________________________________ - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Hi! After reboot DSP card 2.0.51 do not load config from nvram... Is that known bug or may be our hardware broken, or we need set country code, but where? ====== span1> set swt ? usage: set swtype Config_Option where Config_Option is one of the following: ictr4 - NET5/CTR-4 switch type ( European ISDN ) (E1) vn4 - VN4 switch type ( France ) (E1) ts014 - TS014 switch type ( Australia ) span1> set swt ic Configuration Request Successful. span1> cmd sv Save to NVRAM Request Successful. span1> reboot Confirm reboot (y/n): y Rebooting ... !!----------> SDL2 for the PPC403 <------------!! __ Enter Download Trigger __ Flash Image Has Valid CRC, Loading Image.... (Ch.255): 00:00:00:002 SCB CRC: ABCB6A96 exp. ABCB6A96 act. (Ch.255): 00:00:00:002 SCB Country Code Invalid Defaulting to International Console Password:
chdev span span1> dis swt Span1 Switch Type is: N/A
span1> ver Software Version 2.0.51 Regulatory Version 1.0 span1> span1> cmd rss Restore from NVRAM Request Successful. span1> dis swt Span1 Switch Type is: ICTR4 span1> ======= Good luck ! ====================== Andrey Zimin | AVZ7-RIPE MTU-Intel ISP Moscow, Russia ====================== - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Andrey Zimin -
D A Substanley -
Tatai SV Krishnan