RE: (usr-tc) DSPCode 2.0.51
I've been getting reports of non-winmodem sportsters and couriers having the same prob with 2.0.60
-----Original Message----- From: Scot Desort [SMTP:scot@njaccess.net] Sent: Tuesday, January 25, 2000 6:20 PM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) DSPCode 2.0.51
I _think_ I've some improvement in disconnects running 2.0.51. Don't know about Rockwell improvements.
I had a USR Sportster 56K _non_ winmodem having handsaking problems this morning on 2.0.81 and 2.0.19. He hit a 2.0.51 card and all was well. Could have been a co-inki-dink.
-- Scot
----- Original Message ----- From: Charles Sprickman <spork@inch.com> To: <usr-tc@lists.xmission.com> Sent: Tuesday, January 25, 2000 4:08 PM Subject: Re: (usr-tc) DSPCode 2.0.51
On Tue, 25 Jan 2000, Brian wrote:
2.0.51 is good for all DSP's
How's it compare to 2.0.81? Better, worse, indifferent?
Charles
On Tue, 25 Jan 2000, Cheryl Johnson wrote:
Is this code only recommended for hardware revisions .54 and .55 only? I have .49 and was thinking of moving to the 2.0.51 from the 2.0.60 since I do not see too many improvements. And is this compatible with NMC 6.1.17 and ARC 4.1.22? It seems to be getting more difficult to keep these things straight.
-Cheryl Johnson SEI Data Network Services, Inc. A Division of SEI Communications
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Another thing I just noticed about 2.0.51 -- ISDN calls setup much faster (not that they were slow before). I have a 3COM Impact, and I used to get about a 1.5 second delay during which Win95 would display "verifying username". Now, when I connect to a 2.0.51 card, windows barely has enough time to even display that dialog. The setup and authentication is almost instantaneous. -- Scot
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Stainforth, Matthew Sent: Tuesday, January 25, 2000 5:30 PM To: 'usr-tc@lists.xmission.com' Subject: RE: (usr-tc) DSPCode 2.0.51
I've been getting reports of non-winmodem sportsters and couriers having the same prob with 2.0.60
-----Original Message----- From: Scot Desort [SMTP:scot@njaccess.net] Sent: Tuesday, January 25, 2000 6:20 PM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) DSPCode 2.0.51
I _think_ I've some improvement in disconnects running 2.0.51. Don't know about Rockwell improvements.
I had a USR Sportster 56K _non_ winmodem having handsaking problems this morning on 2.0.81 and 2.0.19. He hit a 2.0.51 card and all was well. Could have been a co-inki-dink.
-- Scot
----- Original Message ----- From: Charles Sprickman <spork@inch.com> To: <usr-tc@lists.xmission.com> Sent: Tuesday, January 25, 2000 4:08 PM Subject: Re: (usr-tc) DSPCode 2.0.51
On Tue, 25 Jan 2000, Brian wrote:
2.0.51 is good for all DSP's
How's it compare to 2.0.81? Better, worse, indifferent?
Charles
On Tue, 25 Jan 2000, Cheryl Johnson wrote:
Is this code only recommended for hardware revisions .54 and .55 only? I have .49 and was thinking of moving to the 2.0.51 from the 2.0.60 since I do not see too many improvements. And is this compatible with NMC 6.1.17 and ARC 4.1.22? It seems to be getting more difficult to keep these things straight.
-Cheryl Johnson SEI Data Network Services, Inc. A Division of SEI Communications
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
At 07:37 AM 1/26/00 -0500, Scot Desort wrote:
Another thing I just noticed about 2.0.51 -- ISDN calls setup much faster (not that they were slow before). I have a 3COM Impact, and I used to get about a 1.5 second delay during which Win95 would display "verifying username". Now, when I connect to a 2.0.51 card, windows barely has enough time to even display that dialog. The setup and authentication is almost instantaneous.
Thus far the weight of responses seems to be in favor of 2.0.51, but I'm still a bit wary of moving from 2.0.81, which has been stable here for months. So...I got a couple of questions for those running 2.0.51, particularly with 0.49 hardware. 1. What ARC code are you running? 2. Hung modem pairs...more, less, same? 3. Re: MR 1832-Rockwell v.90 disconnects during speedshift; I've not received a lot of complaints regarding this while running 2.0.81, is there any noticeable difference for better or worse with 2.0.51? Thanks, -- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
1. What ARC code are you running?
4.1.22
2. Hung modem pairs...more, less, same?
none since moving to 2.0.51
3. Re: MR 1832-Rockwell v.90 disconnects during speedshift; I've not received a lot of complaints regarding this while running 2.0.81, is there any noticeable difference for better or worse with 2.0.51?
I have noticed that the connection success rate has improved a bit
Thanks, -- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (4)
-
Brian -
K Mitchell -
Scot Desort -
Stainforth, Matthew