Re: (usr-tc) HiPer DSP and E1/R2
Hi Daniel, You will need an E1/R2 version of Hiper DSP code. The filename is in the format of HR******.DMF, where the *s are the version number. The HE******.DMF files are for E1/PRI and the HD******.DMF files are for T1/PRI. The R2 code is not generally available yet but there are beta and engineering releases that some customers have been using. Your best bet is to call your local support team for assistance at : South Africa 0800-995014 Hope this helps... Regards, David Daniel Mpolokoso <daniel@zamnet.zm> on 10/04/99 07:16:31 AM Please respond to usr-tc@lists.xmission.com Sent by: Daniel Mpolokoso <daniel@zamnet.zm> To: usr-tc <usr-tc@lists.xmission.com> cc: (David Bachta/MW/US/3Com) Subject: (usr-tc) HiPer DSP and E1/R2 Hi, I've been battling for a week trying to get HiPer DSP version 2.0.19 to interface with our telco's switch. They are using basic E1 R2 signaling as per ITU-T standards. I'd be grateful for anyone out there using E1 R2 signaling to give me pointers as to what version of software I should be running and examples of typical configurations. Thanks, Daniel. ------------------------------------------------------------------------ Daniel Mpolokoso - Technical Manager, Email: daniel@zamnet.zm ZAMNET Communication Systems Limited, Phone: +260 - 1 - 772516 P.O. Box 38299, Lusaka, Zambia. Fax: +260 - 1 - 224775 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Hi David, David Bachta wrote:
Hi Daniel,
You will need an E1/R2 version of Hiper DSP code. The filename is in the format of HR******.DMF, where the *s are the version number. The HE******.DMF files are for E1/PRI and the HD******.DMF files are for T1/PRI. The R2 code is not generally available yet but there are beta and engineering releases that some customers have been using.
Ooooh! Where??? We have many customer who need this release (now we give them Dual CAS+ Quad Digital). How can we get access to this code? I haven't seen it on beta tester page.
Your best bet is to call your local support team for assistance at :
South Africa 0800-995014
Hope this helps...
Regards, David
Daniel Mpolokoso <daniel@zamnet.zm> on 10/04/99 07:16:31 AM
Please respond to usr-tc@lists.xmission.com
Sent by: Daniel Mpolokoso <daniel@zamnet.zm>
To: usr-tc <usr-tc@lists.xmission.com> cc: (David Bachta/MW/US/3Com) Subject: (usr-tc) HiPer DSP and E1/R2
Hi,
I've been battling for a week trying to get HiPer DSP version 2.0.19 to interface with our telco's switch. They are using basic E1 R2 signaling as per ITU-T standards. I'd be grateful for anyone out there using E1 R2 signaling to give me pointers as to what version of software I should be running and examples of typical configurations.
Thanks,
Daniel. ------------------------------------------------------------------------ Daniel Mpolokoso - Technical Manager, Email: daniel@zamnet.zm ZAMNET Communication Systems Limited, Phone: +260 - 1 - 772516 P.O. Box 38299, Lusaka, Zambia. Fax: +260 - 1 - 224775
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-- _______________________________________________ Best regards, Vadim Tulinov.
participants (2)
-
David Bachta -
Vadim Tulinov