MPIP. You must configure the HiPer arcs to do MPIP, check your documentation on MPIP or visit 3KB at http://totalservice.usr.com krish On Sun, 16 Jan 2000, Jorge Lozano wrote:

Hello everybody! I have a problem with my ISDN 128 access... I have a TCS with 2 HiperARC and 12 HiperDSP... the first ARC manage 8 = DSP and the second manage 4... the first 10 DSP have a PRI number and = the 11 and 12 DSP have a different number. When any user try to connect by ISDN (128K), and he use both = B-channels... sometimes happens that one channel is assigned in the = first 8 DSP and the second is assigned in 9th or 10th DSP card, then the = user have 2 differents IP address because each ARC assign an IP number.

Can anybody tell me what is the solution for this problem???

Thanks for all..

Jorge Lozano jorge@andinet.com Andinet On Line

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.