(usr-tc) Ascend-IP-Direct / Policy Routing
Does anyone know if the RADIUS attribute "Ascend-IP-Direct" is supported by the HiPerARC? If so, what versions? Both Cisco and Nortel CVX claim to support this VSA.
From the definitions I've seen, Ascend-IP-Direct is used in an Access-Accept and tells the RAS to direct this user's packets to the provided gateway IP. We would be using this to provide transparent content filtering to select customers based on their RADIUS/LDAP entry.
Otherwise, is there a way to do policy routing on the ARC via RADIUS? I've looked at filters, but they don't seem to give the ability to redirect, only accept or reject. (I am running ARC V4.2.32). Thanks, Carl Litt Network Administrator Execulink Internet - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Also sprach Carl Litt
Does anyone know if the RADIUS attribute "Ascend-IP-Direct" is supported by the HiPerARC? If so, what versions? Both Cisco and Nortel CVX claim to support this VSA.
From the definitions I've seen, Ascend-IP-Direct is used in an Access-Accept and tells the RAS to direct this user's packets to the provided gateway IP. We would be using this to provide transparent content filtering to select customers based on their RADIUS/LDAP entry.
Otherwise, is there a way to do policy routing on the ARC via RADIUS? I've looked at filters, but they don't seem to give the ability to redirect, only accept or reject. (I am running ARC V4.2.32).
Look in the manuals for Internet Equal Access...often TLA'ed to IEA. This will do the equivalent and can be set via a VSA in RADIUS. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Well, it turns out to be Ascend-Client-Gateway over here on our Max's... Ascend-IP-Direct didn't do it :-) But that's not your question... take a look at IEA-Next-Hop-Router. I think this will do what you need. -rt (standards -- so many to choose from) On Monday, July 23, 2001, at 01:47 , Carl Litt wrote:
Does anyone know if the RADIUS attribute "Ascend-IP-Direct" is supported by the HiPerARC? If so, what versions? Both Cisco and Nortel CVX claim to support this VSA.
From the definitions I've seen, Ascend-IP-Direct is used in an Access-Accept and tells the RAS to direct this user's packets to the provided gateway IP. We would be using this to provide transparent content filtering to select customers based on their RADIUS/LDAP entry.
Otherwise, is there a way to do policy routing on the ARC via RADIUS? I've looked at filters, but they don't seem to give the ability to redirect, only accept or reject. (I am running ARC V4.2.32).
Thanks, Carl Litt Network Administrator Execulink Internet
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Carl Litt -
Jeff Mcadams -
Ryan Tucker